Used Mori-Seiki Lathe Machines
All The Used Mori-Seiki CNC and Manual Machine Tools You Need - All Of The Time
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright 2012 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type


"MachineID" "TypeMachine" "Year" "Manufacturer" "Model" "Control" "Condition" "UnderPower" "ShortSpecs" "List" "Code" "Quote" "Featured" "Photos"
7989 "AUTO CHUCKERS, SINGLE SPINDLE" "Warner and Swasey" "2AC M-3920" "Very Good" "Yes" " Warner and Swasey 2AC M-3920 " "A7113" "0" "Yes"
8442 "AUTO SCREW MACHINES, MULTI. SPINDLE" "1981" "Acme-Gridley" "RB-8" "Good" "Yes" "8 Spindles, 2 5/8"" Cap., 1,640 RPM, 40 HP" "1981 Acme-Gridley RB-8 " "A8006" "-1" "Yes"
8441 "AUTO SCREW MACHINES, MULTI. SPINDLE" "1984" "New Britain" "657" "Very Good" "Yes" "Maximum Work Diameter 3"", Chucking Length 5.5"", 1,738 RPM, 30 HP, Chip Conveyor, Coolant System, Cams and Gears, Twin Disk Clutches, PLC Controls, Cross Slide Holders" "1984 New Britain 657 " "A8006" "-1" "Yes"
8440 "AUTO SCREW MACHINES, MULTI. SPINDLE" "1980" "New Britain" "657" "Very Good" "Yes" "1980 New Britain 657 " "A8006" "-1" "Yes"
8197 "AUTO SCREW MACHINES, SINGLE SPINDLE" "1972" "Brown and Sharpe" "#2" "Very Good" "Yes" "1 1/4"" Capacity, 3.5"" Chucking Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant, Vertical Cross Slide" "1972 Brown and Sharpe #2 " "A8125" "-1" "Yes"
8524 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2007" "Citizen" "A-20 VLPL" "Cincom System" "Like New" "Yes" "2007 Citizen A-20 VLPL Cincom System" "A8175MS" "0" "Yes"
8523 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2008" "Citizen" "A-20 7PL" "Cincom System" "Like New" "Yes" "2008 Citizen A-20 7PL Cincom System" "A8175MS" "0" "Yes"
6407 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2000" "Nomura" "NN-13TB" "Mitsubishi Meldas 520L" "Very Good" "2000 Nomura NN-13TB Mitsubishi Meldas 520L" "A8175MS" "0" "Yes"
7070 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "1999" "Star" "SV-20" "Fanuc 16TC" "Very Good" "Yes" "1999 Star SV-20 Fanuc 16TC" "A8175MS" "0" "Yes"
7122 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2004" "Star" "SR-20R" "Fanuc 18iTB" "Very Good" "Yes" "2004 Star SR-20R Fanuc 18iTB" "A8175MS" "0" "Yes"
8300 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2008" "Star" "SR-32J" "Fanuc 18iTB" "Very Good" "Yes" "1.25"" Capactiy, 12"" Length, 7,000 RPM, 10 HP, Parts Conveyor, Tool Breakage Detection, Air Blow, Iemca Boss 542 Magazine Bar Loader, Part Ejector Detection, Live and Standard Tooling" "2008 Star SR-32J Fanuc 18iTB" "A8175MS" "0" "Yes"
8208 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "1999" "Star" "SV-32J" "Fanuc 18iT" "Good" "Yes" "1999 Star SV-32J Fanuc 18iT" "A8175MS" "0" "Yes"
5662 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "1996" "Star" "SR-32" "Fanuc 16T" "Good" "Yes" "1996 Star SR-32 Fanuc 16T" "A8175MS" "0" "No"
7773 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2007" "Tsugami" "BE-19" "Fanuc 32iA" "Excellent" "Yes" "Work Diameter 0.118"" - 0.748"", 200 - 12,000 RPM, 5 HP Main 2.95 HP Sub, Live Tooling, 12' Minuteman 320 Bar Feed, Indexing Brake On Back Spindle, Chip Conveyor, Angle Mounted High Speed Spindles (NSK variable frequency up to 60k rpm), 2,233 Run Tim and 1,481 Cutting Hours" "2007 Tsugami BE-19 Fanuc 32iA" "A8175MS" "-1" "Yes"
8096 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2006" "Tsugami" "BS-32 MKIII" "Fanuc LH1" "Excellent" "Yes" "Work Diameter 0.315"" - 1.26"", 200 - 6,000 RPM, 7.37 HP Main 2.95 HP Sub, Barfeed, Live Tooling" "2006 Tsugami BS-32 MKIII Fanuc LH1" "A8175MS" "0" "Yes"
8151 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "2007" "Tsugami" "BS-26C Mark III" "Fanuc 18iTB" "Very Good" "Yes" "2007 Tsugami BS-26C Mark III Fanuc 18iTB" "A8175MS" "-1" "Yes"
8155 "AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL" "1999" "Tsugami" "BS-26C Mark II" "Fanuc 18iTA" "Good" "Yes" "1999 Tsugami BS-26C Mark II Fanuc 18iTA" "A8175MS" "0" "Yes"
5161 "AUTO SCREW MACHINES, SWISS, CNC-SUB SPINDLE" "1988" "Tsugami" "NP-11" "Fanuc 0T" "Good" "Yes" "Work Diameter 0.433"", 200 - 12,000 RPM, 2.9 HP Main 2 HP Sub Spindle, Positions - Front 8-OD, 3-ID, Back 2-ID, Azuma Bar Loader" "1988 Tsugami NP-11 Fanuc 0T" "A8175S" "-1" "Yes"
6759 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1997" "CNC Enhancement" "Auto Bar 400" "Very Good" "Yes" "1997 CNC Enhancement Auto Bar 400 " "B1120" "-1" "Yes"
6456 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2000" "CNC Enhancement" "Auto Bar 400" "Very Good" "Yes" "2000 CNC Enhancement Auto Bar 400 " "B1120" "0" "Yes"
8032 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2007" "Haas" "Servo Bar 300" "Haas 32 BIT" "Like New" "Yes" "2007 Haas Servo Bar 300 Haas 32 BIT" "B1120" "-1" "Yes"
6416 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2004" "Haas" "Servo Bar 300" "Excellent" "Yes" "Bar Capacity 1/4"" to 3-1/8"", Maximum Bar Length 60"", Barfeed in Very Good Condition" "2004 Haas Servo Bar 300 " "B1120" "-1" "Yes"
7191 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2008" "Iemca" "Vip 80 E-II" "New" "No" "2008 Iemca Vip 80 E-II " "B1120" "-1" "Yes"
8195 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2002" "Iemca" "AS 325 Type 52" "Excellent" "Yes" "0.118"" to 0.98425"" Capacity, 205"" Bar Length" "2002 Iemca AS 325 Type 52 " "B1120" "-1" "Yes"
6855 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1994" "LNS" "Hydrobar HYS" "Good" "Yes" "1994 LNS Hydrobar HYS " "B1120" "-1" "Yes"
7831 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1996" "LNS" "Sprint 2 HydroBar" "Good" "Yes" "1996 LNS Sprint 2 HydroBar " "B1120" "0" "Yes"
7175 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1995" "LNS" "Quick Load Servo" "Very Good" "Yes" "1995 LNS Quick Load Servo " "B1120" "0" "Yes"
5763 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1985" "LNS" "Model HYS 4.4-52" "Good" "Yes" "1985 LNS Model HYS 4.4-52 " "B1120" "0" "Yes"
8310 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "2001" "LNS" "Quick Load Servo S2" "Like New" "2001 LNS Quick Load Servo S2 " "B1120" "-1" "Yes"
7895 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1998" "LNS" "Quick Load Servo" "Very Good" "Yes" "1998 LNS Quick Load Servo " "B1120" "0" "Yes"
7177 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1996" "SMW" "Space Saver 2000" "Very Good" "Yes" "60"" x 1/4"" - 3 1/8"" Bar Capacity" "1996 SMW Space Saver 2000 " "B1120" "0" "Yes"
7192 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1993" "SMW" "Space Saver 12.65" "Good" "Yes" "1993 SMW Space Saver 12.65 " "B1120" "0" "Yes"
7836 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1998" "SMW" "Space Saver 2100" "Very Good" "Yes" "1/4 - 3 1/4"" Bar Capacity, 4"" - 48"" Bar Length, Servo Driven, Two (2) Pushers, Manuals" "1998 SMW Space Saver 2100 " "B1120" "-1" "Yes"
7514 "BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL" "1998" "Tri-Vision" "Like New" "Yes" "1998 Tri-Vision " "B1120" "-1" "Yes"
7797 "BEAM SPLITTERS" "2009" "L. L. Brown" "Splitter 120" "New" "No" "2009 L. L. Brown Splitter 120 " "B1441" "-1" "Yes"
7807 "BEAM SPLITTERS" "1980's" "Unknown" "Good" "Yes" "1980's Unknown " "B1441" "0" "Yes"
7606 "BEAM-DRILL LINES, NC-CNC" "2007" "Peddinghaus" "Beam Drill" "Siemens" "Very Good" "Yes" "2007 Peddinghaus Beam Drill Siemens" "B1430" "0" "Yes"
6939 "BENDERS, PIPE and TUBE" "1999" "Addison" "DB-120" "Very Good" "Yes" "1999 Addison DB-120 " "B1804" "0" "No"
7768 "BENDERS, PIPE and TUBE" "1985" "Pines" "5T" "Good" "Yes" "1985 Pines 5T " "B1804" "-1" "Yes"
6915 "BENDERS, PIPE and TUBE" "1964" "Pines" "#4" "Good" "Yes" "1964 Pines #4 " "B1804" "0" "Yes"
6916 "BENDERS, PIPE and TUBE" "1969/02" "Wallace" "4HRD-B-PC" "Allen Bradley PLC 1000" "Rebuilt" "Yes" "1969/02 Wallace 4HRD-B-PC Allen Bradley PLC 1000" "B1804" "0" "Yes"
7667 "BORING MILLS, HORIZ, FLOOR TYPE CNC and NC" "1995" "Cincinnati" "6""" "Delta Tau" "Good" "No" "1995 Cincinnati 6"" Delta Tau" "B5420" "0" "Yes"
7582 "BORING MILLS, HORIZ, FLOOR TYPE CNC and NC" "1970/02" "Cincinnati-Gilbert" "5 3/8""" "Delta Dynapath 50" "Very Good" "Yes" "1970/02 Cincinnati-Gilbert 5 3/8"" Delta Dynapath 50" "B5420" "0" "Yes"
8145 "BORING MILLS, HORIZ, FLOOR TYPE CNC and NC" "1980/2000" "Lucas" "6""" "Delta Dynapath 50" "Good" "Yes" "1980/2000 Lucas 6"" Delta Dynapath 50" "B5420" "0" "Yes"
8082 "BORING MILLS, HORIZ, FLOOR TYPE CNC and NC" "1981/2004" "Mitsubishi" "MAF-150RS" "Fanuc 16M" "Good" "No" "1981/2004 Mitsubishi MAF-150RS Fanuc 16M" "B5420" "0" "Yes"
7677 "BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC" "1981" "Giddings and Lewis" "G-50-TX" "Giddings & Lewis 800B" "Good" "Yes" "5"" Spindle, 50 Taper, 1,400 RPM, 30 HP, 96"" x 72"" 36"" x 56"" Travels, Two (2) 48"" x 72"" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way Covers, Chip Conveyor" "1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B" "B5420A" "-1" "Yes"
7393 "BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC" "1981" "Mitsubishi" "MQF-150" "Allen Bradley 7320" "Neds Repair" "No" "5.905"" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79"" x 86.61"" x 13.77"" x 27.55"" Travels, 42"" x 140"" Table, Hydrostatic Bearings All Axes, Full Three Axis NC Control, Chip Conveyor" "1981 Mitsubishi MQF-150 Allen Bradley 7320" "B5420A" "-1" "Yes"
7682 "BORING MILLS, HORIZ, TABLE TYPE" "1977" "Cincinnati-Gilbert" "4” CDT" "Good" "Yes" "1977 Cincinnati-Gilbert 4” CDT " "B5500" "0" "Yes"
7599 "BORING MILLS, HORIZ, TABLE TYPE" "1970" "Cincinnati-Gilbert" "4""" "Good" "Yes" "1970 Cincinnati-Gilbert 4"" " "B5500" "0" "Yes"
7563 "BORING MILLS, HORIZ, TABLE TYPE" "1967/88" "Cincinnati-Gilbert" "Series C" "Excellent" "Yes" "1967/88 Cincinnati-Gilbert Series C " "B5500" "0" "Yes"
6571 "BORING MILLS, HORIZ, TABLE TYPE" "1969" "Giddings and Lewis" "70-E4-T" "Good" "Yes" "1969 Giddings and Lewis 70-E4-T " "B5500" "0" "Yes"
6870 "BORING MILLS, HORIZ, TABLE TYPE" "1965" "Giddings and Lewis" "65-D4-T" "Very Good" "Yes" "1965 Giddings and Lewis 65-D4-T " "B5500" "0" "Yes"
6621 "BORING MILLS, HORIZ, TABLE TYPE" "Giddings and Lewis" "570T" "Good" "Yes" " Giddings and Lewis 570T " "B5500" "0" "No"
6635 "BORING MILLS, HORIZ, TABLE TYPE" "1952" "Giddings and Lewis" "350-T" "Good" "No" "5"" Spindle, # 6 Morse, 375 RPM, 15 HP, 60"" x 120 Table, 108"" x 60"" x 36"" x 96"" Travels, Three (3) Axis DRO's, Outrigger Support" "1952 Giddings and Lewis 350-T " "B5500" "-1" "Yes"
8227 "BORING MILLS, HORIZ, TABLE TYPE" "Giddings and Lewis" "570-T" "Good" "Yes" " Giddings and Lewis 570-T " "B5500" "0" "Yes"
6637 "BORING MILLS, HORIZ, TABLE TYPE" "1948" "Giddings and Lewis" "330" "Good" "Yes" "1948 Giddings and Lewis 330 " "B5500" "-1" "Yes"
7600 "BORING MILLS, HORIZ, TABLE TYPE" "1962" "Giddings and Lewis" "340T" "Good" "Yes" "1962 Giddings and Lewis 340T " "B5500" "0" "No"
8228 "BORING MILLS, HORIZ, TABLE TYPE" "Giddings and Lewis" "DP5-T" "Good" "Yes" " Giddings and Lewis DP5-T " "B5500" "0" "Yes"
7427 "BORING MILLS, HORIZ, TABLE TYPE" "1950" "Giddings and Lewis" "560T" "Good" "Yes" "1950 Giddings and Lewis 560T " "B5500" "0" "Yes"
6975 "BORING MILLS, HORIZ, TABLE TYPE" "1950" "Giddings and Lewis" "350-T" "Good" "Yes" "5"" Spindle, #6 Taper, 375 RPM, 15 HP, 108"" x 72"" x 36"" x 96"" Travels, 84"" x 48"" Table" "1950 Giddings and Lewis 350-T " "B5500" "-1" "Yes"
6936 "BORING MILLS, HORIZ, TABLE TYPE" "1976" "Giddings and Lewis" "80DP5-T" "Good" "Yes" "1976 Giddings and Lewis 80DP5-T " "B5500" "0" "Yes"
8235 "BORING MILLS, HORIZ, TABLE TYPE" "1994" "Giddings and Lewis" "70A-DP5-T" "Very Good" "1994 Giddings and Lewis 70A-DP5-T " "B5500" "0"
7786 "BORING MILLS, HORIZ, TABLE TYPE" "1942/90" "Giddings and Lewis" "570-T" "Good" "Yes" "1942/90 Giddings and Lewis 570-T " "B5500" "0" "Yes"
7787 "BORING MILLS, HORIZ, TABLE TYPE" "1968" "Giddings and Lewis" "70-E4-T" "Good" "Yes" "1968 Giddings and Lewis 70-E4-T " "B5500" "0" "Yes"
7751 "BORING MILLS, HORIZ, TABLE TYPE" "Giddings and Lewis" "560T" "Good" "Yes" " Giddings and Lewis 560T " "B5500" "0" "Yes"
8337 "BORING MILLS, HORIZ, TABLE TYPE" "Giddings and Lewis" "300-T" "Very Good" "Yes" " Giddings and Lewis 300-T " "B5500" "0" "Yes"
8234 "BORING MILLS, HORIZ, TABLE TYPE" "1965" "Giddings and Lewis" "65-H-6T" "Good" "Yes" "1965 Giddings and Lewis 65-H-6T " "B5500" "0" "Yes"
8231 "BORING MILLS, HORIZ, TABLE TYPE" "1969" "Giddings and Lewis" "DA5-T5" "Good" "Yes" "1969 Giddings and Lewis DA5-T5 " "B5500" "0" "Yes"
6636 "BORING MILLS, HORIZ, TABLE TYPE" "1967" "Giddings and Lewis" "330-T" "Good" "Yes" "1967 Giddings and Lewis 330-T " "B5500" "-1" "Yes"
6426 "BORING MILLS, HORIZ, TABLE TYPE" "1962" "Giddings and Lewis" "DP5-T" "Very Good" "Yes" "1962 Giddings and Lewis DP5-T " "B5500" "0" "Yes"
8011 "BORING MILLS, HORIZ, TABLE TYPE" "1980" "Kuraki" "KBT-1101P" "Good" "Yes" "1980 Kuraki KBT-1101P " "B5500" "0" "Yes"
6577 "BORING MILLS, HORIZ, TABLE TYPE" "1969" "Lucas" "441B72" "Good" "Yes" "1969 Lucas 441B72 " "B5500" "0" "Yes"
7753 "BORING MILLS, HORIZ, TABLE TYPE" "1973" "Lucas" "542B96" "Good" "Yes" "1973 Lucas 542B96 " "B5500" "0" "Yes"
7684 "BORING MILLS, HORIZ, TABLE TYPE" "1967/98" "Lucas" "542B-84" "Very Good" "Yes" "1967/98 Lucas 542B-84 " "B5500" "0" "Yes"
6572 "BORING MILLS, HORIZ, TABLE TYPE" "1974" "Lucas" "20B-64" "Very Good" "Yes" "1974 Lucas 20B-64 " "B5500" "0" "Yes"
7453 "BORING MILLS, HORIZ, TABLE TYPE" "1978" "Lucas" "20B54" "Very Good" "Yes" "4"" Spondle, 50 Taper, 2,200 RPM, 25 HP, 60"" x 48"" x 24"" x 50"" Travels, 72"" x 48"" Table, Threading, Only 3,895 Hours on Machine" "1978 Lucas 20B54 " "B5500" "-1" "Yes"
6578 "BORING MILLS, HORIZ, TABLE TYPE" "1956" "Lucas" "42B-60" "Good" "Yes" "1956 Lucas 42B-60 " "B5500" "0" "Yes"
7611 "BORING MILLS, HORIZ, TABLE TYPE" "1982" "Nomura" "B-100WR" "Good" "Yes" "1982 Nomura B-100WR " "B5500" "0" "Yes"
8252 "BORING MILLS, HORIZ, TABLE TYPE" "1982" "Nomura" "BP-100SP" "Very Good" "Yes" "1982 Nomura BP-100SP " "B5500" "0" "Yes"
7240 "BORING MILLS, HORIZ, TABLE TYPE" "1967" "PBR" "AF-90" "Very Good" "Yes" "1967 PBR AF-90 " "B5500" "-1" "Yes"
7840 "BORING MILLS, HORIZ, TABLE TYPE" "1963" "Scharmann" "WB-75" "Very Good" "Yes" "1963 Scharmann WB-75 " "B5500" "0" "Yes"
7493 "BORING MILLS, HORIZ, TABLE TYPE" "1960" "Scharmann" "5""" "Good" "Yes" "5"" Spindle, MT #6, 2,880 RPM, 20 HP, 68"" x 68"" x 47.8"" x 9.5"" Travels, 22.1"" Facing Head, 51"" x 140"" Table, 59"" x 79"" Power Rotary Table, Outboard Support, Tooling and Line Boring Bars" "1960 Scharmann 5"" " "B5500" "-1" "Yes"
8236 "BORING MILLS, HORIZ, TABLE TYPE" "1963" "Skoda" "W-160A" "Good" "Yes" "1963 Skoda W-160A " "B5500" "0" "Yes"
7806 "BORING MILLS, HORIZ, TABLE TYPE" "1980" "Stanko" "2620B" "Good" "Yes" "1980 Stanko 2620B " "B5500" "0" "Yes"
7710 "BORING MILLS, HORIZ, TABLE TYPE" "1996" "Summit" "HTM-4" "Very Good" "Yes" "1996 Summit HTM-4 " "B5500" "0" "Yes"
8576 "BORING MILLS, HORIZ, TABLE TYPE" "1977" "Tos" "W-100A" "Good" "Yes" "1977 Tos W-100A " "B5500" "0" "Yes"
7330 "BORING MILLS, HORIZ, TABLE TYPE" "1978" "Tos" "W-100A" "Good" "Yes" "1978 Tos W-100A " "B5500" "0" "Yes"
7171 "BORING MILLS, HORIZ, TABLE TYPE" "1980" "Tos" "W-100A" "Good" "Yes" "1980 Tos W-100A " "B5500" "0" "Yes"
7172 "BORING MILLS, HORIZ, TABLE TYPE" "1961" "Tos" "H100A" "Good" "Yes" "1961 Tos H100A " "B5500" "0" "Yes"
6574 "BORING MILLS, HORIZ, TABLE TYPE" "1981" "Toshiba (Shibaura)" "BT-10B" "Good" "Yes" "1981 Toshiba (Shibaura) BT-10B " "B5500" "0" "Yes"
8134 "BORING MILLS, VERTICAL and VTL" "Niles" "144""" "Good" "Yes" "144"" 4-Jaw Chuck, 150"" Swing, 136"" Under Rail, 18 RPM, 75 HP, Two (2) Ram Heads, Pendant Controls, Extended Ram Travel" " Niles 144"" " "B6006" "0" "Yes"
7805 "BORING MILLS, VERTICAL and VTL" "1954" "Schiess" "KE-100" "Good" "Yes" "1954 Schiess KE-100 " "B6006" "0" "Yes"
7336 "BORING MILLS, VERTICAL and VTL" "1952" "Schiess" "KE-125" "Good" "Yes" "1952 Schiess KE-125 " "B6006" "0" "Yes"
8277 "BORING MILLS, VERTICAL and VTL" "1976/95" "Schiess" "KE-100" "Very Good" "Yes" "1976/95 Schiess KE-100 " "B6006" "0" "Yes"
7309 "BORING MILLS, VERTICAL and VTL" "1979" "Summit" "SC-14" "Good" "Yes" "1979 Summit SC-14 " "B6006" "0" "Yes"
8100 "BORING MILLS, VERTICAL and VTL" "2008" "Vulcan" "C5116A" "Excellent" "Yes" "2008 Vulcan C5116A " "B6006" "0" "Yes"
8490 "BORING MILLS, VERTICAL and VTL" "1960" "Webster and Bennett" "48""" "Good" "Yes" "1960 Webster and Bennett 48"" " "B6006" "0" "Yes"
8205 "BORING MILLS, VERTICAL and VTL, CNC and NC" "2008" "Amera-Seiki" "VT-600" "Fanuc OiTC" "Like New" "Yes" "2008 Amera-Seiki VT-600 Fanuc OiTC" "B6200" "-1" "Yes"
7699 "BORING MILLS, VERTICAL and VTL, CNC and NC" "2008" "Amera-Seiki" "VT-1000T" "Fanuc OiTC" "New" "Yes" "2008 Amera-Seiki VT-1000T Fanuc OiTC" "B6200" "-1" "Yes"
7141 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1980/96" "Bullard" "56"" Dyn-Au-Tape" "Fanuc 16TT" "Very Good" "Yes" "1980/96 Bullard 56"" Dyn-Au-Tape Fanuc 16TT" "B6200" "0" "Yes"
8262 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1986" "Bullard" "76"" Cutmaster Model 75" "Allen Bradley 8200" "Very Good" "Yes" "1986 Bullard 76"" Cutmaster Model 75 Allen Bradley 8200" "B6200" "0" "Yes"
7960 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1971" "Bullard" "46"" Dynatrol" "Fanuc OT" "Good" "Yes" "1971 Bullard 46"" Dynatrol Fanuc OT" "B6200" "-1" "Yes"
7765 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1980/04" "Bullard" "46"" Dyn-Au-Tape" "Siemens 802C" "Very Good" "Yes" "1980/04 Bullard 46"" Dyn-Au-Tape Siemens 802C" "B6200" "0" "Yes"
7556 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1968/00" "Bullard" "36"" Dynatrol" "GE 1050" "Excellent" "Yes" "1968/00 Bullard 36"" Dynatrol GE 1050" "B6200" "0" "Yes"
8314 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1965/97" "Bullard" "56""" "GE 2000" "Good" "Yes" "1965/97 Bullard 56"" GE 2000" "B6200" "0" "Yes"
7019 "BORING MILLS, VERTICAL and VTL, CNC and NC" "2007" "Doosan" "VT-1100" "Fanuc OiTC" "Very Good" "Yes" "2007 Doosan VT-1100 Fanuc OiTC" "B6200" "0" "Yes"
7959 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1989/2003" "Femco" "49""" "Fanuc 18iT" "Like New" "Yes" "1989/2003 Femco 49"" Fanuc 18iT" "B6200" "0" "Yes"
8453 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1986" "Giddings and Lewis" "72""" "GE 1054" "Good" "Yes" "1986 Giddings and Lewis 72"" GE 1054" "B6200" "-1" "Yes"
8210 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1982" "Giddings and Lewis" "Model 512" "Giddings & Lewis 800" "Good" "Yes" "1982 Giddings and Lewis Model 512 Giddings & Lewis 800" "B6200" "0" "Yes"
7484 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1990" "Giddings and Lewis" "48""" "Mitsubishi 510C" "Very Good" "No" "1990 Giddings and Lewis 48"" Mitsubishi 510C" "B6200" "0" "Yes"
8057 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1985/1998" "Giddings and Lewis" "42""" "Fanuc 18iT" "Very Good" "Yes" "1985/1998 Giddings and Lewis 42"" Fanuc 18iT" "B6200" "0" "Yes"
7194 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1991" "Giddings and Lewis" "36""" "Mitsubishi Meldas 330L" "Good" "Yes" "1991 Giddings and Lewis 36"" Mitsubishi Meldas 330L" "B6200" "0" "Yes"
8571 "BORING MILLS, VERTICAL and VTL, CNC and NC" "Giddings and Lewis" "VTL-60" "GE Mark Centruy 2000" "Good" "Yes" " Giddings and Lewis VTL-60 GE Mark Centruy 2000" "B6200" "0" "Yes"
8138 "BORING MILLS, VERTICAL and VTL, CNC and NC" "Giddings and Lewis" "52""" "Good" "Yes" " Giddings and Lewis 52"" " "B6200" "0" "Yes"
8562 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1982/09" "Giddings and Lewis" "48""" "Fanuc 21T" "Rebuilt" "Yes" "1982/09 Giddings and Lewis 48"" Fanuc 21T" "B6200" "0" "Yes"
8448 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1970/2008" "Giddings and Lewis" "48""" "Fagor 8055" "Excellent" "Yes" "48"" Table, 60"" Swing, 60"" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head" "1970/2008 Giddings and Lewis 48"" Fagor 8055" "B6200" "-1" "Yes"
5997 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1986" "Gray" "48"" Ringmaster" "Fanuc 15T" "Very Good" "Yes" "1986 Gray 48"" Ringmaster Fanuc 15T" "B6200" "0" "Yes"
8222 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1980/08" "Gray" "RM 66" "Fanuc OiT" "Rebuilt" "Yes" "66"" Table, 72"" Swing, 66"" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66"" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor" "1980/08 Gray RM 66 Fanuc OiT" "B6200" "-1" "Yes"
8553 "BORING MILLS, VERTICAL and VTL, CNC and NC" "Lansing" "56""" "Siemens 810T" "Very Good" "Yes" " Lansing 56"" Siemens 810T" "B6200" "0" "Yes"
8360 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1997" "Lansing" "Model 49-40A" "Very Good" "1997 Lansing Model 49-40A " "B6200" "0" "Yes"
6504 "BORING MILLS, VERTICAL and VTL, CNC and NC" "2002" "Okuma and Howa" "V35R" "Fanuc 18T" "Very Good" "Yes" "2002 Okuma and Howa V35R Fanuc 18T" "B6200" "0" "Yes"
7958 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1981" "O-M Ltd." "VT-5 12N" "Fanuc 6T" "Good" "Yes" "1981 O-M Ltd. VT-5 12N Fanuc 6T" "B6200" "0" "Yes"
8213 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1980" "O-M Ltd." "TM2-10N" "Fanuc 6TB" "Good" "No" "39.37"" Table, 43"" Swing, 29.52"" Under Rail, 500 RPM, 40 HP, 5 Position Turret, 100 IPM, Way Covers, Fanuc Gettys Servo Drives, Table and Splash Guarding, Spindle Motor Rebuild Two (2) Years Ago, Machine Laser Checked Every Year" "1980 O-M Ltd. TM2-10N Fanuc 6TB" "B6200" "0" "Yes"
6653 "BORING MILLS, VERTICAL and VTL, CNC and NC" "2007" "S and T Dynamics" "TNL-120V" "Fanuc OiTB" "New" "Yes" "2007 S and T Dynamics TNL-120V Fanuc OiTB" "B6200" "0" "Yes"
8513 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1987/04" "Schiess" "16DKE-125" "Fanuc 21iT" "Very Good" "Yes" "1987/04 Schiess 16DKE-125 Fanuc 21iT" "B6200" "0" "Yes"
8204 "BORING MILLS, VERTICAL and VTL, CNC and NC" "1982" "Webster and Bennett" "S1250" "Fanuc OT" "Good" "Yes" "1982 Webster and Bennett S1250 Fanuc OT" "B6200" "0" "Yes"
5200 "BORING MILLS, VERTICAL and VTL, CNC MULTI-SPINDLE" "1994" "Giddings and Lewis" "DV15-L Smart Turn" "Giddings & Lewis 8000" "Good" "No" "1994 Giddings and Lewis DV15-L Smart Turn Giddings & Lewis 8000" "B6150" "0" "Yes"
6805 "BORING MILLS, VERTICAL and VTL, CNC MULTI-SPINDLE" "1998" "Whacheon" "5V-2SP" "Fanuc OT" "Very Good" "Yes" "1998 Whacheon 5V-2SP Fanuc OT" "B6150" "0" "Yes"
8003 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2009" "Amera-Seiki" "VT-1600" "Fanuc 18iTB" "New" "Yes" "2009 Amera-Seiki VT-1600 Fanuc 18iTB" "B6200A" "-1" "Yes"
7196 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1980/91" "Bullard" "36"" Dyn-Au-Tape" "Fanuc 15T" "Good" "Yes" "1980/91 Bullard 36"" Dyn-Au-Tape Fanuc 15T" "B6200A" "0" "Yes"
5270 "BRAKES, PRESS, MECHANICAL" "1985" "Wysong" "90 x 12'" "Good" "Yes" "90 Tons, 12' Bed, 10' 6"" BH, 15 HP, 24"" Hurco Back Gauge, Manual Ram Adjustment, Air Counter Balance, Air Clutch & Air Brake, Dual Palm Button Controls" "1985 Wysong 90 x 12' " "B7020" "-1" "Yes"
7023 "BRAKES, PRESS, NC and CNC" "2000" "Amada" "RG-80" "Hurco Autobend 7" "Very Good" "Yes" "88 Tons, 98"" Max. Bend Cap., 14.57"" Open Height, 15.75"" Throat" "2000 Amada RG-80 Hurco Autobend 7" "B7335" "0" "Yes"
6664 "BROACHES, HORIZONTAL SURFACE" "American" "HDE-20-66" "Good" "Yes" " American HDE-20-66 " "B7870" "0" "Yes"
7103 "BROACHES, HORIZONTAL SURFACE" "2003" "American" "H40-90" "Allen Bradley PLC 600" "Very Good" "Yes" "2003 American H40-90 Allen Bradley PLC 600" "B7870" "0" "Yes"
6666 "BROACHES, HORIZONTAL SURFACE" "1954" "Colonial Broach" "HR-15-120" "Very Good" "Yes" "1954 Colonial Broach HR-15-120 " "B7870" "-1" "Yes"
7109 "BROACHES, HORIZONTAL SURFACE" "1966" "Detroit Tool" "50 Ton" "Good" "No" "1966 Detroit Tool 50 Ton " "B7870" "0" "Yes"
8365 "BROACHES, HORIZONTAL SURFACE" "1985" "US Broach" "4T-36VHP" "1985 US Broach 4T-36VHP " "B7870" "0"
5082 "BROACHES, VERTICAL, HI-SPEED" "1996" "Broaching Machine Specialties" "BMC-4-36 Cruiser" "Very Good" "Yes" "4 Ton Cap., 36"" Stroke, Cutting Speed 240 FPM, Return Speeds 120 FPM, Table 10"" x 10"", Automatic Loader and Clamping Fixture Operates on PLC" "1996 Broaching Machine Specialties BMC-4-36 Cruiser " "B8001" "-1" "Yes"
7139 "BROACHES, VERTICAL, PULL DOWN" "1994" "Colonial Broach" "VDS-6-36" "Good" "Yes" "1994 Colonial Broach VDS-6-36 " "B8061" "-1" "On Way"
6938 "CHILLERS" "1991" "Koolant Koolers" "HAF7500SP-ST" "Very Good" "No" "100,000 BTU, 36 GPM, 70 Gallon Resevoir, Chiller Motor 7.5 HP, Coolant Motor 1.5 HP" "1991 Koolant Koolers HAF7500SP-ST " "C1678" "-1" "Yes"
6606 "CHUCKS, POWER" "1995" "--Select Mfg Here--" "22"" 3-Jaw Hydraulic" "Good" "22"" 3-Jaw Hydraulic, Chuck, Draw Tube, and Chuck Face Plate, Chuck Off a 1995 Mori-Seiki SL-65B" "1995 --Select Mfg Here-- 22"" 3-Jaw Hydraulic " "C1960" "-1" "Yes"
6934 "COMPARATORS" "1986" "Jones and Lamson" "Classic 20" "Very Good" "Yes" "1986 Jones and Lamson Classic 20 " "C3806" "0" "Yes"
6937 "COMPARATORS" "1978" "Optical Gaging Products" "OQ-30S" "Very Good" "Yes" "1978 Optical Gaging Products OQ-30S " "C3806" "0" "Yes"
6933 "COMPARATORS" "2002" "Optical Gaging Products" "Focus Contour" "Like New" "Yes" "2002 Optical Gaging Products Focus Contour " "C3806" "-1" "Yes"
6728 "COMPARATORS" "1998" "Suburban Tool" "MV-14200" "Very Good" "Yes" "1998 Suburban Tool MV-14200 " "C3806" "-1" "Yes"
5988 "CONVEYORS, BELT" "2006" "Turbo Systems" "T2878067" "Very Good" "Yes" "2006 Turbo Systems T2878067 " "C5326" "-1" "Yes"
7875 "COOLANT FILTERING SYSTEMS" "2000" "ChipBlaster" "Vega 2000" "Very Good" "Yes" "Maximum Pressure - 2,000 PSI, Maximum Flow Rate - 13 GPM, Mitubishi Microprocessor, Dual Filtration Tanks" "2000 ChipBlaster Vega 2000 " "C5761" "-1" "Yes"
8305 "COOLANT FILTERING SYSTEMS" "2005" "Knoll" "SF 2000/F60-4" "Excellent" "Yes" "2005 Knoll SF 2000/F60-4 " "C5761" "-1" "Yes"
8304 "COOLANT FILTERING SYSTEMS" "2006" "Knoll" "VRF 450/550" "Excellent" "Yes" "2006 Knoll VRF 450/550 " "C5761" "-1" "Yes"
8008 "COORDINATE MEASURING MACHINES" "1999" "Brown and Sharpe" "Leitz PMM-G 3D" "Very Good" "Yes" "1999 Brown and Sharpe Leitz PMM-G 3D " "C5901" "-1" "Yes"
8372 "COORDINATE MEASURING MACHINES" "1989" "Brown and Sharpe" "Xcel 7-10-7" "Very Good" "Yes" "1989 Brown and Sharpe Xcel 7-10-7 " "C5901" "-1" "Yes"
8327 "COORDINATE MEASURING MACHINES" "1997" "Brown and Sharpe" "Micro-Xcel PFX 4-5-4 DCC" "Very Good" "Yes" "22"" x 30"" x 17"" Table, 18"" x 20"" x 16"" Travels, Computer With MM4 Software, Digitizing and Scanning Capabilities, B & S Controller, Computer, Joystick Control" "1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC " "C5901" "-1" "Yes"
7696 "COORDINATE MEASURING MACHINES" "1985" "Cordax" "1808" "Good" "Yes" "1985 Cordax 1808 " "C5901" "0" "Yes"
7184 "COORDINATE MEASURING MACHINES" "1991" "Mitutoyo" "FN-905" "Very Good" "Yes" "Gantry Style, 5 Axis, 36"" x 21"" x 24"", Renishaw (P4-9 MK2) Robotic Probe w/Extra Tips, Renishaw (P4-9 MK2) Robotic Probe w/Extra Tips" "1991 Mitutoyo FN-905 " "C5901" "-1" "Yes"
6401 "COORDINATE MEASURING MACHINES" "Mitutoyo" "BH-710" "Very Good" "Yes" " Mitutoyo BH-710 " "C5901" "-1" "Yes"
8184 "COORDINATE MEASURING MACHINES" "2000" "Optical Gaging Products" "Smartscope Avant ZIP 300" "Very Good" "Yes" "2000 Optical Gaging Products Smartscope Avant ZIP 300 " "C5901" "0" "Yes"
8183 "COORDINATE MEASURING MACHINES" "1996" "Optical Gaging Products" "Smartscope 200 MVP" "Very Good" "Yes" "1996 Optical Gaging Products Smartscope 200 MVP " "C5901" "0" "Yes"
8185 "COORDINATE MEASURING MACHINES" "Optical Gaging Products" "Smartscope 200 MVP" "Very Good" "Yes" " Optical Gaging Products Smartscope 200 MVP " "C5901" "0" "Yes"
8174 "COORDINATE MEASURING MACHINES" "1999" "Renishaw" "Cyclone Digitizer" "Very Good" "Yes" "26"" x 25"" x 18"" Table, 23.6"" x 19.7"" x 15.7"" Travels, Computer With Software, Extra Fixtures, Full Digitizing Capabilities" "1999 Renishaw Cyclone Digitizer " "C5901" "-1" "Yes"
8027 "CRANES, BRIDGE and OVERHEAD" "2000" "P and H" "10 Ton" "Very Good" "No" "10 Tons, 40' Span, 150' Run, 20' Lift Height, Hoist Speed 35 FPM, Trolley Speed 125 FPM, 15 HP Hoist Motor, 4 HP Trolley Motor, Pendant Control, Telemotive Wireless Remote" "2000 P and H 10 Ton " "C6306" "-1" "Yes"
7343 "DRILLING and TAPPING MACHINES CNC" "2001" "Brother" "TC-32A" "Brother CNC AOO" "Very Good" "Yes" "2001 Brother TC-32A Brother CNC AOO" "D3797" "0" "Yes"
7973 "DRILLING and TAPPING MACHINES CNC" "1994" "Brother" "TC-321" "Brother CNC 500" "Good" "Yes" "1994 Brother TC-321 Brother CNC 500" "D3797" "0" "Yes"
7061 "DRILLING and TAPPING MACHINES CNC" "1999" "Brother" "TC-31-A" "Brother CNC AOO" "Very Good" "Yes" "1999 Brother TC-31-A Brother CNC AOO" "D3797" "0" "Yes"
7173 "DRILLING and TAPPING MACHINES CNC" "2000" "Brother" "TC-S2A" "Brother CNC AOO" "Good" "Yes" "2000 Brother TC-S2A Brother CNC AOO" "D3797" "0" "Yes"
6754 "DRILLING and TAPPING MACHINES CNC" "1996" "Brother" "TC-324" "Brother CNC 630" "Good" "Yes" "33.1"" x 19.7"" Table, 16.5"" x 12.6"" x 10.2"" Travels, 10,000 RPM, 30 Taper, 6 HP, 10 ATC, Quick Table Two Surface Pallet Changer" "1996 Brother TC-324 Brother CNC 630" "D3797" "-1" "Yes"
6808 "DRILLING and TAPPING MACHINES CNC" "1997" "Brother" "TC-324" "Brother CNC 630" "Good" "Yes" "1997 Brother TC-324 Brother CNC 630" "D3797" "0" "Yes"
7007 "DRILLING and TAPPING MACHINES CNC" "2004" "Brother" "TC-32B QT" "Brother CNC B00" "Very Good" "Yes" "2004 Brother TC-32B QT Brother CNC B00" "D3797" "0" "Yes"
8331 "DRILLING and TAPPING MACHINES CNC" "2005" "Fanuc" "Robodrill A-T21iDL" "Fanuc 16iMB" "Very Good" "Yes" "2005 Fanuc Robodrill A-T21iDL Fanuc 16iMB" "D3797" "0" "Yes"
8131 "DRILLING and TAPPING MACHINES CNC" "2005" "Fanuc" "Robodrill A-T14iD" "Fanuc 21iM" "Like New" "Yes" "2005 Fanuc Robodrill A-T14iD Fanuc 21iM" "D3797" "0" "Yes"
8478 "DRILLING and TAPPING MACHINES CNC" "2003" "Haas" "MDC 500" "Haas 32 BIT" "Very Good" "Yes" "2003 Haas MDC 500 Haas 32 BIT" "D3797" "0" "Yes"
8435 "DRILLING and TAPPING MACHINES CNC" "1999" "Hyundai" "SPT-V30TD" "Yasnac J-50M" "Yes" "Tables - 23.62"" x 17.7, Travels - 19.68"" x 11.81"" x 11.81"", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow" "1999 Hyundai SPT-V30TD Yasnac J-50M" "D3797" "-1" "Yes"
5974 "DRILLING and TAPPING MACHINES CNC" "1998" "Miyano" "MTV-C310" "Yasnac M-100" "Very Good" "Yes" "Table - 18.9"" x 14.17"", 15.75"" x 11.81"" x 9.84"" Travel, 16,000 RPM, 30 Taper, 15 ATC, Rigid Tapping, RS-232 Port, Miscellaneous Tool Holders and Manuals" "1998 Miyano MTV-C310 Yasnac M-100" "D3797" "-1" "No"
7127 "DRILLS, GUN" "1991" "Dadson" "DS-2512" "Very Good" "Yes" "1991 Dadson DS-2512 " "D4554" "-1" "Yes"
7132 "DRILLS, H.D. and SENSITIVE, MULTI SPINDLE" "1965" "Burgmaster" "2-A" "Good" "Yes" "30"" x 18"" Table, 6 Spindles, 2 1/2 HP, 3/4"" Drill Capacity" "1965 Burgmaster 2-A " "D4803" "-1" "Yes"
6727 "DRILLS, H.D. and SENSITIVE, MULTI SPINDLE" "1981" "Natco" "G-316" "Very Good" "Yes" "24 Spindles, 15 HP, 1,800 RPM, Standard Feed Stroke 18"", Round Head Area 20"", Auto Drill Cycle - Rapid Feed and Return, Pedestal Operator Controls, Bored For 12 - 2"" Diameter Upper Spindle Drives" "1981 Natco G-316 " "D4803" "-1" "Yes"
7435 "DRILLS, RADIAL" "Carlton" "6' x 17""" "Very Good" "Yes" " Carlton 6' x 17"" " "D5700" "0" "Yes"
6960 "GRINDERS, CENTERLESS" "1965" "Cincinnati" "220-8" "Dirty" "No" "1965 Cincinnati 220-8 " "G4306" "-1" "Yes"
8484 "GRINDERS, CYLINDRICAL UNIVERSAL" "19??" "Cincinnati" "DE" "Fair" "Yes" "19?? Cincinnati DE " "G4800" "-1" "Yes"
8353 "GRINDERS, CYLINDRICAL UNIVERSAL" "1975" "Karsten" "KC-AS 1600" "Good" "Yes" "14.17"" Work Dia., 63"" Length, 14.74"" x 4"" x 5"" Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant Filtration System, Holding Tight Tolerances of +/- .00025" "1975 Karsten KC-AS 1600 " "G4800" "-1" "Yes"
8425 "GRINDERS, CYLINDRICAL UNIVERSAL" "1958" "Landis" "18"" x 120""" "Very Good" "Yes" "1958 Landis 18"" x 120"" " "G4800" "0" "Yes"
8193 "GRINDERS, CYLINDRICAL UNIVERSAL" "Landis" "Type F" "Good" "Yes" " Landis Type F " "G4800" "0" "Yes"
7593 "GRINDERS, CYLINDRICAL UNIVERSAL" "Landis" "1R Universal" "Very Good" "Yes" " Landis 1R Universal " "G4800" "0" "Yes"
8192 "GRINDERS, CYLINDRICAL UNIVERSAL" "2000" "SMTW" "H147" "Very Good" "Yes" "2000 SMTW H147 " "G4800" "0" "Yes"
8207 "GRINDERS, CYLINDRICAL UNIVERSAL" "1993" "Tos" "BUB-50/1500" "Good" "Yes" "1993 Tos BUB-50/1500 " "G4800" "0" "Yes"
8190 "GRINDERS, CYLINDRICAL UNIVERSAL" "1988" "Tos" "BUT 63 / 3000" "Good" "Yes" "1988 Tos BUT 63 / 3000 " "G4800" "0" "Yes"
8247 "GRINDERS, CYLINDRICAL UNIVERSAL" "1983" "Tos" "BU 28-1000" "Very Good" "Yes" "1983 Tos BU 28-1000 " "G4800" "0" "Yes"
8191 "GRINDERS, CYLINDRICAL UNIVERSAL" "1988" "WMW" "SA6 x 3000" "Good" "Yes" "1988 WMW SA6 x 3000 " "G4800" "0" "Yes"
8573 "GRINDERS, CYLINDRICAL, NC and CNC" "1999" "Weldon" "1632 Gold" "Fanuc 150T" "Very Good" "Yes" "Capacity 16"" x 32"", 60,000 & 120,000 RPM Heads, 15 HP, Programmable C-Axis Work Head for Non-Round Grinding, Lots of Tooling & Attachments" "1999 Weldon 1632 Gold Fanuc 150T" "G4601" "-1" "Yes"
7151 "GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC" "1987" "Toyoda" "GPN5A-32X100" "Toyoda" "Good" "Yes" "1987 Toyoda GPN5A-32X100 Toyoda" "G4765" "0" "Yes"
7595 "GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC" "1986" "Warner and Swasey" "Grinding Center" "Yes" "1986 Warner and Swasey Grinding Center " "G4820" "0" "Yes"
5745 "GRINDERS, DRILL" "1979" "Giddings and Lewis" "HC Exactamatic" "Good" "Yes" "1979 Giddings and Lewis HC Exactamatic " "G5054" "-1" "Yes"
6854 "GRINDERS, FORM" "1994" "Hybco" "Model 3000" "Very Good" "Yes" "1994 Hybco Model 3000 " "G6325" "0" "Yes"
7108 "GRINDERS, JIG" "1952" "Moore" "#3" "Good" "Yes" "1952 Moore #3 " "G6705" "-1" "Yes"
6894 "GRINDERS, JIG" "1967" "Moore" "#3" "Very Good" "Yes" "1967 Moore #3 " "G6705" "0" "Yes"
8224 "GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC" "2000" "K.O. Lee" "S1024523" "Leematic" "Very Good" "No" "24"" x 10"" Table, 28"" x 11 3/4"" Travels, 5 HP, 1,900 RPM, Leematic Programmable Control, Table Speed Flow Control Valves, Spindle RPM and Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck" "2000 K.O. Lee S1024523 Leematic" "G8030" "-1" "Yes"
7837 "GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC" "2003" "Tru Tech" "TT-8000" "Tru Tech" "Like New" "Yes" "18"" x 6"" Chuck, 12"" x 6"" Travels, 3 HP, Pentium IV Computer, Pick-N-Place Talking Software With Built-In Program Self-Training, Fully Programmable Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With Filter System and Hoses, 3"" Ultra-Precision Grinding Unit, Through Feed Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And Contour Grinding Capabilities, Mist Buster 500" "2003 Tru Tech TT-8000 Tru Tech" "G8030" "-1" "Yes"
6986 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "2001" "Danobat" "RT-1200" "Fagor 102S" "Very Good" "Yes" "2001 Danobat RT-1200 Fagor 102S" "G8025" "0" "Yes"
6774 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1970" "Gallmeyer and Livingston" "Model A" "Good" "Yes" "36"" x 12"" Magnetic Chuck, 44"" x 12"" Travels, 20"" Wheel, 15 HP, Neutrofier, Auto Incremental Power Down Feed, Barnes MP-20 Magnetic and Fabric Coolant Filter" "1970 Gallmeyer and Livingston Model A " "G8025" "-1" "Yes"
8574 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1998" "Harig" "618 EZ Surf" "Bridgeport" "Very Good" "Yes" "18"" x 6"" Walker Magnetic Chuck, 12"" Under Wheel, 19"" x 6 3/4"" Travels, 1 HP, 100 FPM, Wet Grinding Attachment With Pump and Tank, Bridgeport PC Based Programmble Control" "1998 Harig 618 EZ Surf Bridgeport" "G8025" "-1" "Yes"
8608 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1997" "Jones and Shipman" "540E" "Very Good" "Yes" "1997 Jones and Shipman 540E " "G8025" "0" "Yes"
6985 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1998" "Kent" "615 AHD" "Very Good" "Yes" "1998 Kent 615 AHD " "G8025" "0" "Yes"
8607 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "2001" "Mark" "1224" "Like New" "Yes" "2001 Mark 1224 " "G8025" "0" "Yes"
6777 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1989" "Mark" "48"" x 20""" "Very Good" "Yes" "1989 Mark 48"" x 20"" " "G8025" "0" "Yes"
6767 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1986" "Mattison" "16"" x 48""" "Very Good" "Yes" "1986 Mattison 16"" x 48"" " "G8025" "0" "Yes"
8604 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1995" "Mitsui" "MSG-205MH" "Very Good" "Yes" "1995 Mitsui MSG-205MH " "G8025" "0" "Yes"
8605 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "2002" "Okamoto" "ACC-1224DX" "Very Good" "Yes" "2002 Okamoto ACC-1224DX " "G8025" "0" "Yes"
8601 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1994" "Okamoto" "ACC-124N" "Very Good" "Yes" "1994 Okamoto ACC-124N " "G8025" "0" "Yes"
8602 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1992" "Okamoto" "ACC-124N" "Good" "Yes" "1992 Okamoto ACC-124N " "G8025" "0" "Yes"
7938 "IRONWORKERS" "1987" "Peddinghaus" "Model Super 210/AD25" "Very Good" "Yes" "1987 Peddinghaus Model Super 210/AD25 " "P8915" "0" "Yes"
8452 "IRONWORKERS" "1996" "Piranha" "P-50" "Very Good" "Yes" "1996 Piranha P-50 " "P8915" "0" "Yes"
8237 "IRONWORKERS" "2007" "Scotchman" "5014" "Excellent" "Yes" "50 Tons, 45 SPM, 4"" x 3/8"" Cap., 2 HP Motor, Very Little Use" "2007 Scotchman 5014 " "P8915" "0" "Yes"
7782 "JIG MILLS" "DeVlieg" "3B-48 Spiramatic" "Yes" " DeVlieg 3B-48 Spiramatic " "J5503" "0"
6760 "KEYSEATER" "1982" "Hansford and Davis" "Model 5" "Good" "Yes" "1982 Hansford and Davis Model 5 " "K3004" "0" "Yes"
8311 "KEYSEATER" "1945" "Mitts and Merrill" "Model 6A" "Fair" "No" "1945 Mitts and Merrill Model 6A " "K3004" "0" "Yes"
7630 "LAPPING MACHINES" "1984" "Lapmaster" "24E" "Very Good" "Yes" "Three Rings, Open Style, Lapping Plate Dia. (O.D. x I.D.) 24"" x 4 1/2"", Conditioning Ring Diameter (I.D. x O.D.) 9 3/4"" x 11 1/4""" "1984 Lapmaster 24E " "L0754" "0" "Yes"
7631 "LAPPING MACHINES" "1995" "Speedfam" "BTAW-24" "Good" "Yes" "1995 Speedfam BTAW-24 " "L0754" "0" "Yes"
7632 "LAPPING MACHINES" "Spitfire" "SP-GYR-3-24CCA" "Good" "No" " Spitfire SP-GYR-3-24CCA " "L0754" "-1" "Yes"
7633 "LAPPING MACHINES" "Spitfire" "SP-ML-15" "Good" "No" " Spitfire SP-ML-15 " "L0754" "-1" "Yes"
8525 "LASERS" "2003" "BLM Adige" "Lasertube Model LT70D" "Siemens 840D" "Very Good" "Yes" "2003 BLM Adige Lasertube Model LT70D Siemens 840D" "L0850" "0" "Yes"
8180 "LASERS" "2002" "BLM Adige" "Lasertube Model LT803D" "Siemens 840D" "Good" "Yes" "252"" Maximum Tub Length, 5.5"" Maximum Tube Diameter, Seven (7) Axis Control, Scrap Conveyor, Automatic Tube Measuring and Loading System, Tube Feeding System (Main Chuck), CAD/CAM Software" "2002 BLM Adige Lasertube Model LT803D Siemens 840D" "L0850" "0" "Yes"
8344 "LASERS" "2006" "Mazak" "Space Gear 48/2500 Mark II" "Fanuc 106iLB" "Very Good" "Yes" "2006 Mazak Space Gear 48/2500 Mark II Fanuc 106iLB" "L0850" "0" "Yes"
6017 "LASERS" "1990/00" "Mazak" "TX-48" "Mazatrol L-32" "Good" "No" "1990/00 Mazak TX-48 Mazatrol L-32" "L0850" "0" "Yes"
7528 "LASERS" "1996" "Mitsubishi" "ML2512-LXP" "Mitsubishi LC10BV" "Good" "Yes" "Two 48"" x 96"" Tables, 98.4"" x 49.2"" x 3.93"" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set" "1996 Mitsubishi ML2512-LXP Mitsubishi LC10BV" "L0850" "-1" "Yes"
8450 "LASERS" "1998" "Mitsubishi" "ML2512-LXP" "Mitsubishi LC10BV" "Very Good" "Yes" "Two 48"" x 96"" Tables, 98.4"" x 49.2"" x 3.93"" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set, Remote Jog Handle" "1998 Mitsubishi ML2512-LXP Mitsubishi LC10BV" "L0850" "-1" "Yes"
7540 "LATHES, CNC, 2-AXIS, CHUCKER" "2006" "Daewoo" "Puma V-550" "Fanuc 21iTB" "Very Good" "Yes" "2006 Daewoo Puma V-550 Fanuc 21iTB" "L2125" "0" "Yes"
8350 "LATHES, CNC, 2-AXIS, CHUCKER" "1985" "Emco Maier" "Enco Turn 342" "Fanuc OT" "Good" "Yes" "13.38"" Swing, 6.22"" SOC, 9.13"" Turning Length, 6,000 RPM, 2.08"" Spindle Bore, 1.1875"" Bar Capacity, A2-5 Nose, 15 HP, 8 Station Turret, 8"" 3-Jaw Air Chuck, Mayfran Chip Conveyor, Tool Holders, Turret Rebuild Four (4) Years Ago" "1985 Emco Maier Enco Turn 342 Fanuc OT" "L2125" "-1" "Yes"
6974 "LATHES, CNC, 2-AXIS, CHUCKER" "1980/99" "George Fisher" "NDM-56" "Mitsubishi Meldas 600" "Good" "Yes" "1980/99 George Fisher NDM-56 Mitsubishi Meldas 600" "L2125" "0" "Yes"
7546 "LATHES, CNC, 2-AXIS, CHUCKER" "1990" "Giddings and Lewis" "40C" "Giddings & Lewis 8000B" "Good" "Yes" "1990 Giddings and Lewis 40C Giddings & Lewis 8000B" "L2125" "0" "Yes"
7580 "LATHES, CNC, 2-AXIS, CHUCKER" "2002" "Haas" "SL-10" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas SL-10 Haas 32 BIT" "L2125" "0" "Yes"
7407 "LATHES, CNC, 2-AXIS, CHUCKER" "1998" "Haas" "HL-5" "Haas 32 BIT" "Very Good" "Yes" "1998 Haas HL-5 Haas 32 BIT" "L2125" "0" "Yes"
8475 "LATHES, CNC, 2-AXIS, CHUCKER" "2006" "Haas" "SL-10" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas SL-10 Haas 32 BIT" "L2125" "0" "Yes"
5977 "LATHES, CNC, 2-AXIS, CHUCKER" "1980" "Hardinge" "AHC" "Omniturn OT" "Very Good" "Yes" "Round 5C Collet -1-1/16"", Hexagon 5C Collet - 7/8"", Square 5C Collet - 3/4"", 2.1"" Swing, 3,000 RPM, 2 HP, SMW Omnibar 20 FSQ Barfeed, Gang Tooling Slide, Slide Tooling and Collets, Full Enclosure" "1980 Hardinge AHC Omniturn OT" "L2125" "-1" "Yes"
7666 "LATHES, CNC, 2-AXIS, CHUCKER" "2000" "Hardinge" "Cobra-65" "Fanuc 21iT" "Good" "Yes" "2000 Hardinge Cobra-65 Fanuc 21iT" "L2125" "0" "Yes"
5913 "LATHES, CNC, 2-AXIS, CHUCKER" "1989" "Jones and Lamson" "615 Shaft" "Delta Dynapath 10" "Good" "Yes" "1989 Jones and Lamson 615 Shaft Delta Dynapath 10" "L2125" "0" "No"
6420 "LATHES, CNC, 2-AXIS, CHUCKER" "2003" "Lansing" "G Model P-24" "GE 1050" "Very Good" "Yes" "2003 Lansing G Model P-24 GE 1050" "L2125" "0" "Yes"
6824 "LATHES, CNC, 2-AXIS, CHUCKER" "Lansing" "G NV-30" "GE 1050 TZ" "Good" "Yes" " Lansing G NV-30 GE 1050 TZ" "L2125" "0" "Yes"
6655 "LATHES, CNC, 2-AXIS, CHUCKER" "1994" "Mazak" "Quick Turn-35N / 1000" "Mazatrol T-32-2" "Good" "Yes" "1994 Mazak Quick Turn-35N / 1000 Mazatrol T-32-2" "L2125" "0" "Yes"
7816 "LATHES, CNC, 2-AXIS, CHUCKER" "1981/1994" "Mazak" "Powermaster 1600" "Fanuc 15T" "Good" "Yes" "1981/1994 Mazak Powermaster 1600 Fanuc 15T" "L2125" "0" "Yes"
8129 "LATHES, CNC, 2-AXIS, CHUCKER" "2005" "Mazak" "Nexus Quick Turn-100" "Mazatrol Fusion 640T" "Good" "Yes" "2005 Mazak Nexus Quick Turn-100 Mazatrol Fusion 640T" "L2125" "0" "Yes"
8122 "LATHES, CNC, 2-AXIS, CHUCKER" "1996" "Mazak" "Powermaster 1600" "Fanuc 15TF" "Good" "Yes" "1996 Mazak Powermaster 1600 Fanuc 15TF" "L2125" "0" "Yes"
7826 "LATHES, CNC, 2-AXIS, CHUCKER" "1983" "Mazak" "Powermaster 1600" "Fanuc 6TB" "Good" "Yes" "1983 Mazak Powermaster 1600 Fanuc 6TB" "L2125" "0" "Yes"
7863 "LATHES, CNC, 2-AXIS, CHUCKER" "1983" "Mazak " "M-4 / 1500" "Mazatrol T-1" "Fair" "Yes" "1983 Mazak M-4 / 1500 Mazatrol T-1" "L2125" "0" "Yes"
8081 "LATHES, CNC, 2-AXIS, CHUCKER" "1978" "Mazak" "Powermaster 1100" "Fanuc 2000C" "Good" "Yes" "1978 Mazak Powermaster 1100 Fanuc 2000C" "L2125" "-1" "Yes"
7707 "LATHES, CNC, 2-AXIS, CHUCKER" "1983" "Mazak" "Powermaster 1100" "Fanuc 6T" "Good" "Yes" "1983 Mazak Powermaster 1100 Fanuc 6T" "L2125" "0" "Yes"
6768 "LATHES, CNC, 2-AXIS, CHUCKER" "1994" "Mazak" "Quick Turn-15N" "Mazatrol T-32-2" "Good" "Yes" "1994 Mazak Quick Turn-15N Mazatrol T-32-2" "L2125" "0" "Yes"
7917 "LATHES, CNC, 2-AXIS, CHUCKER" "1983" "Mazak" "M-4 / 1000" "Mazatrol T-1" "Good" "Yes" "40"" Swing, 11"" SOC, 40"" Centers, 3,000 RPM, 3.1 Bore, 25 HP, 4 + 6 Turret, 12"" 3-Jaw Hydraulic Chuck, Chip Guard, RS-232 Port, Coolant System" "1983 Mazak M-4 / 1000 Mazatrol T-1" "L2125" "-1" "Yes"
7487 "LATHES, CNC, 2-AXIS, CHUCKER" "1988" "Miyano" "BNC-34A" "Fanuc 0T" "Good" "Yes" "10.5"" Swing, 4 1/16"" Max. Turning Dia., 9"" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, RS-232 Port, Tool Holders" "1988 Miyano BNC-34A Fanuc 0T" "L2125" "-1" "Yes"
7387 "LATHES, CNC, 2-AXIS, CHUCKER" "1986" "Mori-Seiki" "SL-OH" "Good" "Yes" "Swing Over Bed 7.5"", Swing Over Saddle 7.5"", Maximum Turning Diameter 8.3"", Length 16.5"", 6,000 RPM, 7.5 HP, 8 Sta. Turret, Tailstock, 6"" Collet Chuck, 12' LNS Hydro-Bar Bar Feed, Parts Catcher" "1986 Mori-Seiki SL-OH " "l2125" "-1" "Yes"
7112 "LATHES, CNC, 2-AXIS, CHUCKER" "1982" "Mori-Seiki" "SL-4A" "Yasnac 2000C" "Fair" "Yes" "Swing - 25.5"", Swing OCS - 16.53"", 2,500 RPM, 30 HP, 3"" Bore, 10 Sta. Turret, X-Travel - 9.25"", Z-Travel - 24"", 10"" 3-Jaw Hydraulic Chuck, 5-C Collet Closer, Cimnet BTR Board For Direct Computer Input" "1982 Mori-Seiki SL-4A Yasnac 2000C" "L2125" "-1" "Yes"
7359 "LATHES, CNC, 2-AXIS, CHUCKER" "1999" "Mori-Seiki" "CL-150" "Mori-Seiki MSC-803L" "Very Good" "Yes" "20.28"" Swing, 15.74"" Swing Over Cross Slide, 13.5"" Maximum Turning Diameter, 11.93"" Maximum Turning Length, 6,000 RPM, 10 HP, 12 Sta. Turret, 6"" 3-Jaw Chuck, Turbo Chip Conveyor, Manual Tool Presetter" "1999 Mori-Seiki CL-150 Mori-Seiki MSC-803L" "L2125" "-1" "No"
7634 "LATHES, CNC, 2-AXIS, CHUCKER" "1997" "Mori-Seiki" "SL-65C" "Mitsubishi MSC-516" "Good" "Yes" "1997 Mori-Seiki SL-65C Mitsubishi MSC-516" "L2125" "0" "Yes"
7616 "LATHES, CNC, 2-AXIS, CHUCKER" "1999" "Mori-Seiki" "CL-153" "Mitsubishi MSG-803" "Good" "Yes" "1999 Mori-Seiki CL-153 Mitsubishi MSG-803" "L2125" "0" "Yes"
8462 "LATHES, CNC, 2-AXIS, CHUCKER" "1997" "Mori-Seiki" "CL-200B" "MSC-803L" "Very Good" "Yes" "Swing Over Bed 20.3"", Swing Over Saddle 9.5"", Maximum Turning Diameter 16.14"", Length 14.6"", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, Parts Catcher, 8"" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed, Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane" "1997 Mori-Seiki CL-200B MSC-803L" "L2125" "-1" "Yes"
6421 "BORING MILLS, HORIZ, TABLE TYPE" "1988" "Union" "BFT-125/5" "Very Good" "Yes" "1988 Union BFT-125/5 " "B5500" "0" "Yes"
7785 "BORING MILLS, HORIZ, TABLE TYPE" "1966" "Wotan" "B-100-S" "Good" "Yes" "1966 Wotan B-100-S " "B5500" "0" "Yes"
7708 "BORING MILLS, HORIZ, TABLE TYPE" "1983" "Wotan" "B75 / 105" "Good" "Yes" "1983 Wotan B75 / 105 " "B5500" "0" "Yes"
7729 "BORING MILLS, HORIZ, TABLE TYPE" "1976" "Wotan" "B-130-R" "Good" "Yes" "1976 Wotan B-130-R " "B5500" "0" "Yes"
8545 "BORING MILLS, HORIZ, TABLE TYPE" "1980" "Wotan" "B-105-S" "Very Good" "Yes" "1980 Wotan B-105-S " "B5500" "0" "Yes"
8427 "BORING MILLS, HORIZ, TABLE TYPE" "1965" "Wotan" "B-130" "Good" "Yes" "1965 Wotan B-130 " "B5500" "0" "Yes"
8547 "BORING MILLS, HORIZ, TABLE TYPE" "1975" "Wotan" "B-130-S" "Good" "Yes" "1975 Wotan B-130-S " "B5500" "0" "Yes"
8536 "BORING MILLS, HORIZ, TABLE TYPE" "1978" "Wotan" "B-105-S" "Good" "Yes" "1978 Wotan B-105-S " "B5500" "0" "Yes"
7977 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1982" "Cincinnati-Gilbert" "JT" "GE 1050" "Good" "Yes" "1982 Cincinnati-Gilbert JT GE 1050" "B5751" "0" "Yes"
8577 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1995" "Daewoo" "DNB-130R" "Fanuc 15M" "Very Good" "Yes" "1995 Daewoo DNB-130R Fanuc 15M" "B5751" "0" "Yes"
8226 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1981/94" "Giddings and Lewis" "G50-T" "G&L 8000B" "Very Good" "Yes" "1981/94 Giddings and Lewis G50-T G&L 8000B" "B5751" "0" "Yes"
8225 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1981/94" "Giddings and Lewis" "G50-T" "G&L 8000B" "Very Good" "Yes" "1981/94 Giddings and Lewis G50-T G&L 8000B" "B5751" "0" "Yes"
7554 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1977/94" "Giddings and Lewis" "70A-G5-T" "Giddings & Lewis 8000" "Good" "No" "1977/94 Giddings and Lewis 70A-G5-T Giddings & Lewis 8000" "B5751" "0" "Yes"
8232 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1970/96" "Giddings and Lewis" "70-H5-T" "Heidenhain TNC-406" "Good" "Yes" "1970/96 Giddings and Lewis 70-H5-T Heidenhain TNC-406" "B5751" "0" "Yes"
8338 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1954/89" "Giddings and Lewis" "350-T" "Allen Bradley 8400" "Good" "Yes" "1954/89 Giddings and Lewis 350-T Allen Bradley 8400" "B5751" "0" "Yes"
7472 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1978" "Giddings and Lewis" "G50-T" "G&L 800" "Good" "Yes" "1978 Giddings and Lewis G50-T G&L 800" "B5751" "0" "Yes"
7473 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1980" "Giddings and Lewis" "PC50-TX" "G&L 800" "Good" "Yes" "1980 Giddings and Lewis PC50-TX G&L 800" "B5751" "0" "Yes"
7584 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1986" "Kuraki" "KBT-1105" "Fanuc 10M" "Good" "Yes" "1986 Kuraki KBT-1105 Fanuc 10M" "B5751" "0" "Yes"
7621 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1986" "Kuraki" "BM-10DX" "Fanuc 10M" "Very Good" "No" "1986 Kuraki BM-10DX Fanuc 10M" "B5751" "0" "Yes"
7622 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1994" "Kuraki" "KBT-11" "Fanuc 16M" "Very Good" "Yes" "1994 Kuraki KBT-11 Fanuc 16M" "B5751" "0" "Yes"
7732 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1985/97" "Lucas" "30T-116" "Fanuc 16M" "Very Good" "Yes" "1985/97 Lucas 30T-116 Fanuc 16M" "B5751" "0" "Yes"
6891 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1976/02" "Lucas" "Model 441B" "Mitsubishi Meldas M-330HM" "Very Good" "Yes" "4"" Spindle, 25 HP, 1,450 RPM, 50 Taper, 84"" x 48"" x 30"" x 48"" Travels, 48"" x 84 Table, 25"" x 25"" Full 4th Rotary Table, Rotary Tilt 135, Power Draw Bar, Rotary Resolvers, Ball Screws All Axes, Pendant Mounted Control, Machine Completely Remanufactured In 2002, Calibrated to ISO 9000 Specs" "1976/02 Lucas Model 441B Mitsubishi Meldas M-330HM" "B5751" "-1" "Yes"
7482 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1987" "Lucas" "30D CS" "GE Mark Centruy 2000" "Needs Retrofitting" "Yes" "1987 Lucas 30D CS GE Mark Centruy 2000" "B5751" "0" "Yes"
8493 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1982/99" "Lucas" "40T" "Fanuc 150M" "Very Good" "Yes" "1982/99 Lucas 40T Fanuc 150M" "B5751" "0" "Yes"
8253 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1982/92" "Nomura" "B-100WP" "Mitsubishi Meldas 300" "Very Good" "Yes" "1982/92 Nomura B-100WP Mitsubishi Meldas 300" "B5751" "0" "Yes"
8249 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1999" "Olympia" "H100 X 60" "Fanuc 16iM" "Very Good" "Yes" "1999 Olympia H100 X 60 Fanuc 16iM" "B5751" "0" "Yes"
8537 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1997" "Stanko" "T-Type" "Fanuc 16M" "Very Good" "Yes" "1997 Stanko T-Type Fanuc 16M" "B5751" "0" "Yes"
8320 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1982/05" "Toshiba" "BP-13P5" "Fanuc 16MB" "Very Good" "Yes" "1982/05 Toshiba BP-13P5 Fanuc 16MB" "B5751" "0" "Yes"
8248 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "1999" "Toshiba" "BP-110-P20" "Tosnuc 888" "Very Good" "Yes" "1999 Toshiba BP-110-P20 Tosnuc 888" "B5751" "0" "Yes"
8556 "BORING MILLS, HORIZ, TABLE TYPE CNC and NC" "Wotan" "Rapid 1" "Delta Dynapath 10" "Good" "Yes" " Wotan Rapid 1 Delta Dynapath 10" "B5751" "0" "Yes"
8283 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2009" "Doosan" "DB-130C" "Fanuc 18iMB" "Like New" "Yes" "2009 Doosan DB-130C Fanuc 18iMB" "B5751A" "0" "Yes"
8061 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2007" "Doosan" "DB130CX" "Fanuc 18iM" "Very Good" "Yes" "2007 Doosan DB130CX Fanuc 18iM" "B5751A" "0" "Yes"
8284 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2006" "Doosan" "DB-250CM" "Fanuc 18iM" "Very Good" "Yes" "2006 Doosan DB-250CM Fanuc 18iM" "B5751A" "0" "Yes"
7583 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2003" "Giddings and Lewis" "PC-50" "Fanuc 16iMB" "Good" "Yes" "2003 Giddings and Lewis PC-50 Fanuc 16iMB" "B5751A" "0" "Yes"
7462 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1993" "Giddings and Lewis" "MC60-P" "G&L 8000M" "Good" "Yes" "1993 Giddings and Lewis MC60-P G&L 8000M" "B5751A" "0" "Yes"
8534 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1994" "Giddings and Lewis" "PC-50" "Giddings & Lewis 8000B" "Very Good" "Yes" "5"" Spindle, 25 HP, 3,000 RPM, 50 Taper, 72"" x 54"" x 30"" x 50"" Travels, 100 ATC, Full 4th, Two (2) 48"" x 48"" Pallets, Outrigger Saddle Supports, Power Draw Bar, Hardened Bed Ways, Coolant Through Spindle, Dual Chip Conveyors, Remote Jog Handle" "1994 Giddings and Lewis PC-50 Giddings & Lewis 8000B" "B5751A" "-1" "Yes"
7405 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2004" "Ikegai" "NB-110T" "Fanuc 16iM" "Very Good" "Yes" "2004 Ikegai NB-110T Fanuc 16iM" "B5751A" "0" "Yes"
7991 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1990" "Kuraki" "KBT-13CDXA" "Fanuc 15M" "Excellent" "Yes" "1990 Kuraki KBT-13CDXA Fanuc 15M" "B5751A" "0" "Yes"
7077 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1990" "Kuraki" "KBT-11 WDXA" "Fanuc 15M" "Good" "Yes" "1990 Kuraki KBT-11 WDXA Fanuc 15M" "B5751A" "0" "Yes"
7856 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1991" "Kuraki" "KBT-11 WDXA" "Fanuc 15M" "Good" "Yes" "1991 Kuraki KBT-11 WDXA Fanuc 15M" "B5751A" "0" "Yes"
8321 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1987" "Mazak" "YMS-H25Q" "Mazatrol M-2" "Good" "Yes" "6.3"" Spindle, 20 HP, 2,500 RPM, 50 Taper, 200"" x 60"" x 36"" x 18"" Travels, 80 ATC, 15 Right Angle Head ATC, 236"" x 72"" Table, 72"" x 72"" Full 4th Rotary Table, Right Angle Milling Head, Stainless Steel Covers, EIA / ISO Input Function, Conversational Programming, Chip Conveyor" "1987 Mazak YMS-H25Q Mazatrol M-2" "B5751A" "-1" "Yes"
6686 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1998" "Mitsubishi" "MHT 11/1618" "Mitsubishi 520M" "Very Good" "Yes" "1998 Mitsubishi MHT 11/1618 Mitsubishi 520M" "B5751A" "0" "Yes"
6957 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1997" "Mitsubishi" "MHT 11/1416" "Mitsubishi 520M" "Very Good" "Yes" "1997 Mitsubishi MHT 11/1416 Mitsubishi 520M" "B5751A" "0" "Yes"
7855 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1996" "Mitsubishi" "MHT 11/1416" "Mitsubishi 520ME" "Very Good" "Yes" "1996 Mitsubishi MHT 11/1416 Mitsubishi 520ME" "B5751A" "0" "Yes"
7524 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2008" "Poreba" "HBM-110" "Fanuc 18iMB" "New" "Yes" "2008 Poreba HBM-110 Fanuc 18iMB" "B5751A" "0" "Yes"
8542 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2009" "TigercuT" "110" "New" "Yes" "2009 TigercuT 110 " "B5751A" "0" "Yes"
8526 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1994" "Toshiba" "BTD-110/ER-16" "Tosnuc 777-2" "Very Good" "Yes" "1994 Toshiba BTD-110/ER-16 Tosnuc 777-2" "B5751A" "0" "Yes"
7978 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1994" "Toshiba" "BTD-110/ER-16" "Tosnuc 777-2" "Good" "Yes" "1994 Toshiba BTD-110/ER-16 Tosnuc 777-2" "B5751A" "0" "Yes"
8541 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "2005" "Toshiba" "BTD-110/ER16" "Tosnuc 888" "Very Good" "Yes" "2005 Toshiba BTD-110/ER16 Tosnuc 888" "B5751A" "0" "Yes"
8546 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "Union" "CBFK-150" "Fanuc 16MA" "New" "Yes" " Union CBFK-150 Fanuc 16MA" "B5751A" "0" "Yes"
7592 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1987" "Wotan" "Rapid O" "GE 2000" "Good" "Yes" "4.13"" Spindle, 40 HP, 3,200 Rpm, 50 Taper, 49.2"" x 40.2"" x 30.70 Travels, 40 ATC, 31.5"" x 31.5"" Full 4th Rotary Table, Hardened Ways All Axes, Way Covers, Four (4) Way Bed Design, DNC Capability, Getty Servo Drive, Coolant System, Kennameter Facing & Boring Head (#UC2)" "1987 Wotan Rapid O GE 2000" "B5751A" "0" "Yes"
8156 "BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC" "1994" "Wotan" "Cutmax II" "Heidenhain TNC-415" "Very Good" "Yes" "1994 Wotan Cutmax II Heidenhain TNC-415" "B5751A" "0" "Yes"
7569 "BORING MILLS, VERTICAL and VTL" "1956" "Bertram" "60""" "Good" "Yes" "1956 Bertram 60"" " "B6006" "0" "Yes"
8412 "BORING MILLS, VERTICAL and VTL" "1950's" "Betts" "120""" "Very Good" "Yes" "1950's Betts 120"" " "B6006" "0" "Yes"
8063 "BORING MILLS, VERTICAL and VTL" "Betts" "112""" "Good" "Yes" " Betts 112"" " "B6006" "0" "Yes"
7224 "BORING MILLS, VERTICAL and VTL" "1942" "Betts" "96""" "Good" "Yes" "1942 Betts 96"" " "B6006" "0" "Yes"
8123 "BORING MILLS, VERTICAL and VTL" "Bullard" "30"" Cutmaster" "Good" "Yes" " Bullard 30"" Cutmaster " "B6006" "0" "Yes"
7735 "BORING MILLS, VERTICAL and VTL" "1956" "Bullard" "46"" Model 75" "Fair" "Yes" "1956 Bullard 46"" Model 75 " "B6006" "0" "Yes"
6949 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "30"" Cutmaster" "Good" "Yes" "1954 Bullard 30"" Cutmaster " "B6006" "0" "Yes"
8124 "BORING MILLS, VERTICAL and VTL" "1958" "Bullard" "36"" Cutmaster" "Very Good" "Yes" "1958 Bullard 36"" Cutmaster " "B6006" "0" "Yes"
7741 "BORING MILLS, VERTICAL and VTL" "1986" "Bullard" "46"" Dynatrol" "Good" "Yes" "1986 Bullard 46"" Dynatrol " "B6006" "0" "Yes"
8567 "BORING MILLS, VERTICAL and VTL" "Bullard" "54"" Spiral Drive" "Good" "Yes" " Bullard 54"" Spiral Drive " "B6006" "0" "Yes"
8142 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "-1" "Yes"
8572 "BORING MILLS, VERTICAL and VTL" "Bullard" "56"" Dynatrol" "Good" "Yes" " Bullard 56"" Dynatrol " "B6006" "0" "Yes"
7734 "BORING MILLS, VERTICAL and VTL" "1964" "Bullard" "36"" Dynatrol" "Good" "Yes" "1964 Bullard 36"" Dynatrol " "B6006" "0" "Yes"
8143 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "-1" "Yes"
5860 "BORING MILLS, VERTICAL and VTL" "1967" "Bullard" "52"" Dynatrol" "Good" "Yes" "1967 Bullard 52"" Dynatrol " "B6006" "0" "Yes"
8062 "BORING MILLS, VERTICAL and VTL" "1943" "Bullard" "36"" Spiral Drive" "Good" "Yes" "1943 Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
7889 "BORING MILLS, VERTICAL and VTL" "1964" "Bullard" "36"" Dynatrol" "Good" "Yes" "36"" 3-Jaw Chuck, 48"" Swing, 30"" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways" "1964 Bullard 36"" Dynatrol " "B6006" "-1" "Yes"
8459 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "74"" Cutmaster" "Very Good" "Yes" "1954 Bullard 74"" Cutmaster " "B6006" "0" "Yes"
7880 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Very Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
7879 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "30"" Cutmaster" "Very Good" "Yes" "1954 Bullard 30"" Cutmaster " "B6006" "0" "Yes"
6730 "BORING MILLS, VERTICAL and VTL" "1958" "Bullard" "36"" Spiral Drive" "Very Good" "Yes" "1958 Bullard 36"" Spiral Drive " "B6006" "-1" "Yes"
8479 "BORING MILLS, VERTICAL and VTL" "1942" "Bullard" "36"" Spiral Drive" "Very Good" "Yes" "1942 Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
5869 "BORING MILLS, VERTICAL and VTL" "1973" "Bullard" "46"" Dynatrol" "Very Good" "Yes" "1973 Bullard 46"" Dynatrol " "B6006" "0" "Yes"
7259 "BORING MILLS, VERTICAL and VTL" "1985" "Bullard" "46"" Dynatrol" "Good" "Yes" "1985 Bullard 46"" Dynatrol " "B6006" "0" "Yes"
8564 "BORING MILLS, VERTICAL and VTL" "Bullard" "42"" Spiral Drive" "Good" "Yes" " Bullard 42"" Spiral Drive " "B6006" "0" "Yes"
6549 "BORING MILLS, VERTICAL and VTL" "1967" "Bullard" "36"" Dynatrol" "Very Good" "Yes" "1967 Bullard 36"" Dynatrol " "B6006" "0" "Yes"
8563 "BORING MILLS, VERTICAL and VTL" "1952" "Bullard" "42"" Cutmaster" "Yes" "1952 Bullard 42"" Cutmaster " "B6006" "0" "Yes"
8098 "BORING MILLS, VERTICAL and VTL" "1950" "Bullard" "54"" Cutmaster" "Good" "Yes" "1950 Bullard 54"" Cutmaster " "B6006" "0" "Yes"
7018 "BORING MILLS, VERTICAL and VTL" "1968" "Bullard" "36"" Dynatrol" "Good" "Yes" "1968 Bullard 36"" Dynatrol " "B6006" "0" "Yes"
7432 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "54"" Cutmaster" "Good" "Yes" "1954 Bullard 54"" Cutmaster " "B6006" "0" "Yes"
8565 "BORING MILLS, VERTICAL and VTL" "Bullard" "54"" Spiral Drive" "Good" "Yes" " Bullard 54"" Spiral Drive " "B6006" "0" "Yes"
8413 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Godd" "Yes" " Bullard 36"" Spiral Drive " "B6006" "-1" "Yes"
8103 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "64"" Cutmaster" "Good" "Yes" "1954 Bullard 64"" Cutmaster " "B6006" "0" "Yes"
8073 "BORING MILLS, VERTICAL and VTL" "1954/1999" "Bullard" "36"" Cutmaster" "Very Good" "Yes" "1954/1999 Bullard 36"" Cutmaster " "B6006" "0" "Yes"
6044 "BORING MILLS, VERTICAL and VTL" "1941" "Bullard" "36"" Spiral Drive" "Good" "Yes" "1941 Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
8067 "BORING MILLS, VERTICAL and VTL" "1946" "Bullard" "42"" Spiral Drive" "Good" "Yes" "42"" 4-Jaw Chuck, 45"" Swing - Side Up, 54"" Swing Side Down, 37"" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head" "1946 Bullard 42"" Spiral Drive " "B6006" "0" "Yes"
7265 "BORING MILLS, VERTICAL and VTL" "1948" "Bullard" "36"" Cutmaster" "Good" "Yes" "1948 Bullard 36"" Cutmaster " "B6006" "0" "Yes"
8544 "BORING MILLS, VERTICAL and VTL" "Bullard" "42"" Cutmaster" "Very Good" "No" " Bullard 42"" Cutmaster " "B6006" "0" "Yes"
7725 "BORING MILLS, VERTICAL and VTL" "1952" "Bullard" "54"" Cutmaster" "Good" "Yes" "1952 Bullard 54"" Cutmaster " "B6006" "0" "No"
7255 "BORING MILLS, VERTICAL and VTL" "1952" "Bullard" "42"" Cutmaster" "Fair" "Yes" "1952 Bullard 42"" Cutmaster " "B6006" "0" "Yes"
8066 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
6223 "BORING MILLS, VERTICAL and VTL" "1954" "Bullard" "42"" Cutmaster" "Very Good" "No" "1954 Bullard 42"" Cutmaster " "B6006" "-1" "Yes"
8118 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
7238 "BORING MILLS, VERTICAL and VTL" "1957" "Bullard" "36"" Man-Au-Trol" "Good" "Yes" "1957 Bullard 36"" Man-Au-Trol " "B6006" "-1" "Yes"
6221 "BORING MILLS, VERTICAL and VTL" "1950" "Bullard" "Model 75 Cutmaster" "Good" "Yes" "1950 Bullard Model 75 Cutmaster " "B6006" "0" "Yes"
8420 "BORING MILLS, VERTICAL and VTL" "Bullard" "36"" Spiral Drive" "Good" "Yes" " Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
8064 "BORING MILLS, VERTICAL and VTL" "1942" "Bullard" "36"" Spiral Drive" "Good" "Yes" "1942 Bullard 36"" Spiral Drive " "B6006" "0" "Yes"
8392 "BORING MILLS, VERTICAL and VTL" "1976" "Bullard" "86"" Dynatrol" "Very Good" "Yes" "1976 Bullard 86"" Dynatrol " "B6006" "0" "Yes"
8388 "BORING MILLS, VERTICAL and VTL" "Cincinnati" "92"" Hypro" "Good" "No" "92"" 4-Jaw Chuck, 102"" Swing, 64"" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required" " Cincinnati 92"" Hypro " "B6006" "0" "Yes"
6818 "BORING MILLS, VERTICAL and VTL" "1951" "Cincinnati" "54"" Hypro" "Good" "Yes" "1951 Cincinnati 54"" Hypro " "B6006" "0" "Yes"
7612 "BORING MILLS, VERTICAL and VTL" "1947" "Cincinnati" "52"" Hypro" "Good" "Yes" "1947 Cincinnati 52"" Hypro " "B6006" "0" "Yes"
8443 "BORING MILLS, VERTICAL and VTL" "1977" "Dorries" "40""" "Very Good" "Yes" "1977 Dorries 40"" " "B6006" "0" "Yes"
7798 "BORING MILLS, VERTICAL and VTL" "1951" "Froriep" "KE-10" "Good" "Yes" "39.37"" Table, 45.27"" Swing, Height UR 41.33"", 3.3 - 180 RPM, 50 HP, Turret Head, Side Head, 39"" 4-Jaw Chuck, Pendant Control," "1951 Froriep KE-10 " "B6006" "0" "Yes"
8140 "BORING MILLS, VERTICAL and VTL" "1968" "Froriep" "10KZ300" "Allen Bradley 550" "Good" "Yes" "1968 Froriep 10KZ300 Allen Bradley 550" "B6006" "-1" "Yes"
8182 "BORING MILLS, VERTICAL and VTL" "1960" "Froriep" "173""" "Very Good" "Yes" "1960 Froriep 173"" " "B6006" "0" "Yes"
8200 "BORING MILLS, VERTICAL and VTL" "1970" "Froriep" "6KE 260/610-120" "Very Good" "No" "1970 Froriep 6KE 260/610-120 " "B6006" "0" "Yes"
8114 "BORING MILLS, VERTICAL and VTL" "1954" "Giddings and Lewis" "Model 61" "Very Good" "Yes" "1954 Giddings and Lewis Model 61 " "B6006" "0" "Yes"
7664 "BORING MILLS, VERTICAL and VTL" "1952" "Giddings and Lewis" "72"" Hypro" "Needs Repair" "No - Can Be" "1952 Giddings and Lewis 72"" Hypro " "B6006" "0" "Yes"
7376 "BORING MILLS, VERTICAL and VTL" "1955" "Giddings and Lewis" "72"" Hypro" "Very Good" "No" "1955 Giddings and Lewis 72"" Hypro " "B6006" "0" "Yes"
8390 "BORING MILLS, VERTICAL and VTL" "King" "84""" "Very Good" "No" " King 84"" " "B6006" "0" "Yes"
8285 "BORING MILLS, VERTICAL and VTL" "1948" "King" "62""" "Good" "Yes" "62"" Table, 72"" Swing, 62"" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66"" 4-Jaw Manual Chuck, Pendant Control" "1948 King 62"" " "B6006" "-1" "Yes"
8391 "BORING MILLS, VERTICAL and VTL" "King" "96""" "Very Good" " King 96"" " "B6006" "0" "No"
6715 "BORING MILLS, VERTICAL and VTL" "1956" "King" "30""" "Very Good" "Yes" "1956 King 30"" " "B6006" "0" "Yes"
8418 "BORING MILLS, VERTICAL and VTL" "King" "84""" "Good" "Yes" " King 84"" " "B6006" "0" "Yes"
8198 "BORING MILLS, VERTICAL and VTL" "1955" "King" "42""" "Good" "Yes" "1955 King 42"" " "B6006" "0" "Yes"
7607 "BORING MILLS, VERTICAL and VTL" "1953" "King" "56""" "Good" "Yes" "56"" Table, 64"" Swing, 44"" UR, 100 RPM, 50 HP, 3 Heads -Turret, Side and Ram, Four Jaw Chuck, Pendant Controls, Rapid Traverse to Rail Head, Set of Four (4) Table Jaws, Pendant Control, Coolant System" "1953 King 56"" " "B6006" "0" "Yes"
7717 "BORING MILLS, VERTICAL and VTL" "1953" "King" "36""" "Good" "Yes" "1953 King 36"" " "B6006" "0" "Yes"
8575 "BORING MILLS, VERTICAL and VTL" "King" "64""" "Good" "Yes" " King 64"" " "B6006" "0" "Yes"
8410 "BORING MILLS, VERTICAL and VTL" "1942/02" "King" "96""" "Good" "Yes" "1942/02 King 96"" " "B6006" "0" "Yes"
8106 "BORING MILLS, VERTICAL and VTL" "1950" "King" "V-7 - 100""" "Fair" "Yes" "1950 King V-7 - 100"" " "B6006" "0" "Yes"
8069 "BORING MILLS, VERTICAL and VTL" "Morando" "TVK-120" "Good" "Yes" " Morando TVK-120 " "B6006" "0" "Yes"
8201 "BORING MILLS, VERTICAL and VTL" "Niles" "144""" "Good" "Yes" " Niles 144"" " "B6006" "0" "Yes"
8616 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1976/1990" "Bullard" "46""" "Fanuc OTC" "Fair" "Yes" "1976/1990 Bullard 46"" Fanuc OTC" "B6200A" "0" "Yes"
8583 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1991" "Giddings and Lewis" "Series 512" "Giddings & Lewis 8000" "Good" "Yes" "1991 Giddings and Lewis Series 512 Giddings & Lewis 8000" "B6200A" "0" "Yes"
6830 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1977/05" "Giddings and Lewis" "72""" "Giddings & Lewis 8000B" "Excellent" "Yes" "1977/05 Giddings and Lewis 72"" Giddings & Lewis 8000B" "B6200A" "0" "Yes"
8543 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1994" "Giddings and Lewis" "Series 512" "Giddings & Lewis 8000" "Good" "No" "1994 Giddings and Lewis Series 512 Giddings & Lewis 8000" "B6200A" "0" "Yes"
6843 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1980" "Gray" "VFR" "GE 2000" "Good" "Yes" "1980 Gray VFR GE 2000" "B6200A" "0" "Yes"
7818 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1985" "Gray" "VFR" "GE 2000" "Good" "Yes" "1985 Gray VFR GE 2000" "B6200A" "0" "Yes"
8319 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2004" "Lansing" "50""" "Siemens 810T" "Very Good" "No" "2004 Lansing 50"" Siemens 810T" "B6200A" "0" "Yes"
8579 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1993" "Mazak" "A-12 Megaturn" "Mazatrol T-32-3" "Very Good" "Yes" "1993 Mazak A-12 Megaturn Mazatrol T-32-3" "B6200A" "0" "Yes"
8528 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2002" "New Century" "110""" "Fanuc 18iTA" "Very Good" "Yes" "2002 New Century 110"" Fanuc 18iTA" "B6200A" "0" "Yes"
7956 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1992" "O-M Ltd." "TM2-10N" "Fanuc 15T" "Very Good" "Yes" "43.3"" Table, 53.14"" Swing, 31.5"" Under Rail, 350 RPM, 50 HP, 12 Position ATC, 393 IPM, Way Covers, Automatic Tool Probe, X-Axis Scale Feedback. Table and Splash Guarding, 43.3"" 3-Jaw Power Chuck" "1992 O-M Ltd. TM2-10N Fanuc 15T" "B6200A" "0" "Yes"
8339 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2008" "Takang" "VL-100CM" "Fanuc 18iT" "New" "No" "2008 Takang VL-100CM Fanuc 18iT" "B6200A" "0" "Yes"
7195 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2007" "Titan" "57/65" "Fanuc OiTC" "New" "Yes" "2007 Titan 57/65 Fanuc OiTC" "B6200A" "0" "Yes"
6827 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2007" "Titan" "14/165" "Fanuc OiTC" "New" "No" "2007 Titan 14/165 Fanuc OiTC" "B6200A" "0" "Yes"
8530 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2009" "Tongil" "ST-25/35VC" "Fanuc 18iTB" "New" "No" "2009 Tongil ST-25/35VC Fanuc 18iTB" "B6200A" "0" "Yes"
8385 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1982/2009" "Toshiba" "TMC-16A" "Fanuc 18T" "Rebuilt" "Yes" "1982/2009 Toshiba TMC-16A Fanuc 18T" "B6200A" "0" "Yes"
8342 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2008" "Toshiba" "TUE-20" "Fanuc OiTC" "New" "Yes" "2008 Toshiba TUE-20 Fanuc OiTC" "B6200A" "0" "Yes"
8383 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2002" "Toshiba" "TUE-20" "Fanuc 18iT" "Very Good" "Yes" "2002 Toshiba TUE-20 Fanuc 18iT" "B6200A" "0" "Yes"
7522 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "1996" "Toshiba" "TUD-20" "Fanuc 15TA" "Very Good" "Yes" "1996 Toshiba TUD-20 Fanuc 15TA" "B6200A" "0" "Yes"
8381 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2007" "Toshiba" "TUE-15" "Fanuc 18T" "Excellent" "Yes" "2007 Toshiba TUE-15 Fanuc 18T" "B6200A" "0" "Yes"
7955 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2007" "Vanguard" "TAC-16A" "Fanuc 18iT" "Very Good" "Yes" "2007 Vanguard TAC-16A Fanuc 18iT" "B6200A" "0" "Yes"
7268 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2008" "Vanguard" "TAC-12" "Fanuc 18iTB" "New Machine" "No" "2008 Vanguard TAC-12 Fanuc 18iTB" "B6200A" "0" "Yes"
8271 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2008" "You Ji" "VTL-2500 ATC" "Fanuc 18iTB" "New" "No" "2008 You Ji VTL-2500 ATC Fanuc 18iTB" "B6200A" "0" "Yes"
8586 "BORING MILLS, VERTICAL and VTL, CNC W-ATC" "2008" "You Ji" "VTL-3000 ATC" "Fanuc 18iTB" "New" "Yes" "2008 You Ji VTL-3000 ATC Fanuc 18iTB" "B6200A" "0" "Yes"
7090 "BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC" "1993" "Mazak" "A-12 Megaturn" "Fanuc 15T" "Good" "No" "1993 Mazak A-12 Megaturn Fanuc 15T" "B6175A" "0" "Yes"
6644 "BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC" "1996" "Toshiba" "TMD-16 2-APC" "Fanuc 15TC" "Good" "Yes" "1996 Toshiba TMD-16 2-APC Fanuc 15TC" "B6175A" "0" "Yes"
6781 "BRAKES, PRESS, HYDRAULIC" "2000" "Allsteel" "PBC 375-12" "Very Good" "Yes" "2000 Allsteel PBC 375-12 " "B7015" "0" "No"
7010 "BRAKES, PRESS, HYDRAULIC" "2000" "Amada" "RG-1030 LD" "NC-9LD" "Very Good" "Yes" "2000 Amada RG-1030 LD NC-9LD" "B7015" "0" "Yes"
7204 "BRAKES, PRESS, HYDRAULIC" "1981" "Cincinnati" "600 FM" "Good" "No" "1981 Cincinnati 600 FM " "B7015" "0" "Yes"
7208 "BRAKES, PRESS, HYDRAULIC" "1990" "Cincinnati" "350-AF-10" "Good" "No" "1990 Cincinnati 350-AF-10 " "B7015" "0" "Yes"
8382 "BRAKES, PRESS, HYDRAULIC" "2002" "Guifil" "PE-30-100" "Automec 1000" "Excellent" "Yes" "110 Tons, 10' 1"" Bed, 100"" Between Housings, Automec 1000 2-Axis CNC Gauges, Lots of Tooling" "2002 Guifil PE-30-100 Automec 1000" "B7015" "0" "Yes"
5382 "BRAKES, PRESS, HYDRAULIC" "2005" "Hydrapower International" "GHS-11008" "Delem DA 66" "New" "Yes" "2005 Hydrapower International GHS-11008 Delem DA 66" "B7015" "0" "Yes"
7165 "BRAKES, PRESS, HYDRAULIC" "1972" "Pacific" "300 Ton" "Good" "Yes" "1972 Pacific 300 Ton " "B7015" "0" "Yes"
7099 "BRAKES, PRESS, HYDRAULIC" "1966" "Pacific" "200-10" "Good" "Yes" "200 Tons, 10' Bed, 8' 4"" Between Housings, 7.5"" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge" "1966 Pacific 200-10 " "B7015" "-1" "Yes"
7100 "BRAKES, PRESS, HYDRAULIC" "1985" "Pacific" "100-10" "Good" "Yes" "1985 Pacific 100-10 " "B7015" "-1" "Yes"
7207 "BRAKES, PRESS, HYDRAULIC" "1974" "Pacific" "K350-12" "Good" "No" "1974 Pacific K350-12 " "B7015" "0" "Yes"
7209 "BRAKES, PRESS, HYDRAULIC" "1972" "Pacific" "K300-14" "Good" "Yes" "1972 Pacific K300-14 " "B7015" "0" "Yes"
7206 "BRAKES, PRESS, HYDRAULIC" "1965" "Pacific" "400-14" "Good" "No" "1965 Pacific 400-14 " "B7015" "0" "Yes"
8455 "BRAKES, PRESS, HYDRAULIC" "1990" "Promecam" "RG-103" "Good" "Yes" "1990 Promecam RG-103 " "B7015" "0" "Yes"
8454 "BRAKES, PRESS, HYDRAULIC" "1981" "Promecam" "RG-65-25" "Good" "Yes" "120 Tons, 1/4"" Mild Steel Capacity, 8' Bed, 90"" Between housings, 8"" Stroke, 15"" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 25 HP, Manual Back Operated Back Gauge, Upper & Lower Die Holders, Overload Protection, Flush Mount Frame, Bed Tilt For Off-Set Bending, Off / Set/ Jog / Run / Single Modes, Large Selection of Tooling" "1981 Promecam RG-65-25 " "B7015" "0" "Yes"
8384 "BRAKES, PRESS, HYDRAULIC" "1974" "Promecam" "RG-75-35" "Good" "Yes" "80 Tons, 122' Bed, 105"" Between housings, 4"" Stroke, 12"" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 7.5 HP, Variable Stroke Adjustment, Adjustable Punch Holders, Full Length Treadle" "1974 Promecam RG-75-35 " "B7015" "0" "Yes"
8449 "BRAKES, PRESS, MECHANICAL" "1978" "Chicago" "Model 68-B" "Good" "Yes" "1978 Chicago Model 68-B " "B7020" "-1" "Yes"
7637 "BRAKES, PRESS, MECHANICAL" "1958" "Cincinnati" "600 Ton x 20'" "Good" "Yes" "1958 Cincinnati 600 Ton x 20' " "B7020" "-1" "Yes"
7212 "BRAKES, PRESS, MECHANICAL" "1972" "Cincinnati" "Series 13" "Good" "Yes" "1972 Cincinnati Series 13 " "B7020" "0" "Yes"
8432 "BRAKES, PRESS, MECHANICAL" "Dreis and Krump" "610D" "Good" "Yes" " Dreis and Krump 610D " "B7020" "0" "Yes"
8433 "BRAKES, PRESS, MECHANICAL" "1956" "Dreis and Krump" "5510D" "Good" "Yes" "1956 Dreis and Krump 5510D " "B7020" "0" "Yes"
7436 "DRILLS, RADIAL" "Carlton" "5' x 17""" "Good" "Yes" " Carlton 5' x 17"" " "D5700" "0" "Yes"
7440 "DRILLS, RADIAL" "Carlton" "5' x 17""" "Very Good" "Yes" " Carlton 5' x 17"" " "D5700" "0" "Yes"
7552 "DRILLS, RADIAL" "1980" "Cegielski (Polamco)" "GRV-554" "Very Good" "Yes" "8' Arm, 18"" Column, 68.9"" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5"", Drilling Capacity Mild Cast 3.1"", Box Table, Power Clamping, Power Elevation" "1980 Cegielski (Polamco) GRV-554 " "D5700" "-1" "Yes"
7437 "DRILLS, RADIAL" "Cincinnati-Bickford" "6' x 17""" "Good" "Yes" " Cincinnati-Bickford 6' x 17"" " "D5700" "0" "Yes"
7447 "DRILLS, RADIAL" "1956" "Cincinnati-Bickford" "4' x 9""" "Good" "Yes" "1956 Cincinnati-Bickford 4' x 9"" " "D5700" "-1" "Yes"
7442 "DRILLS, RADIAL" "1965" "Cincinnati-Bickford" "962 Chipmaster" "Very Good" "Yes" "1965 Cincinnati-Bickford 962 Chipmaster " "D5700" "0" "Yes"
7170 "DRILLS, RADIAL" "2005" "Csepel" "RFH 100/3000" "Very Good" "Yes" "118"" Arm, 23.625"" Column, 82.67"" Under Spindle, 25 HP, 19 5/8"" Spindle Travel, 4 17/32"" Diameter, MT #6, 1,600 RPM, 4"" Drill Cap. Steel, Threading" "2005 Csepel RFH 100/3000 " "D5700" "-1" "Yes"
6875 "DRILLS, RADIAL" "1985" "Kitchen and Walker" "E501400" "Very Good" "Yes" "6' Arm, 13"" 3/4"" Column, 5.5 HP, 2,000 RPM, Power Elevation, Coolant And Chip Guarding" "1985 Kitchen and Walker E501400 " "D5700" "-1" "Yes"
7438 "DRILLS, RADIAL" "Ooya" "RE3-1600" "Good" "Yes" " Ooya RE3-1600 " "D5700" "0" "Yes"
7876 "DUST COLLECTORS" "2000" "ChipBlaster" "MistBlaster" "Very Good" "Yes" "Maximum CFM - 1,200 CFM, Suction Inlet - 10"" Intake, Liquid Return, Can Be Run As Stand Alone Unit or with ChipBlaster Unit, M-Code Controlled" "2000 ChipBlaster MistBlaster " "D8300" "-1" "Yes"
6462 "DUST COLLECTORS" "1998" "Torit" "TDDB 3000" "Very Good" "Yes" "1998 Torit TDDB 3000 " "D8300" "0" "Yes"
7783 "EDM - (SMALL HOLE)" "KTC" "EZ-430" " KTC EZ-430 " "E2450" "0"
6530 "EDM - (SMALL HOLE)" "1991" "Sodick" "K1CN" "Good" "Yes" "14.96"" x 14.96"" Table, 7.87"" x 11.81"" x 11.81"" Travels, 30 Amps, Automatic Electrode Feeder, Dual Floppy Disc Drive, Dielectric Tank, Sodick 4 Axis CNC Control" "1991 Sodick K1CN " "E2450" "0" "Yes"
6541 "EDM - (SMALL HOLE)" "1992" "Sodick" "K1CN" "Needs Repair" "Yes" "1992 Sodick K1CN " "E2450" "-1" "Yes"
6529 "EDM - (SMALL HOLE)" "1990" "Sodick" "K1CN" "Good" "Yes" "14.96"" x 14.96"" Table, 7.87"" x 11.81"" x 11.81"" Travels, 30 Amps, Automatic Electrode Feeder, Dual Floppy Disc Drive, Dielectric Tank, Sodick 4 Axis CNC Control" "1990 Sodick K1CN " "E2450" "0" "Yes"
8241 "EDM - RAM, CNC" "1999" "Agie" "Mondo Star 50" "Agie Futura V" "Very Good" "Yes" "1999 Agie Mondo Star 50 Agie Futura V" "E2425" "0" "Yes"
5743 "EDM - RAM, CNC" "1998" "Agie" "Mondo 50" "Agie Future V" "Very Good" "Yes" "1998 Agie Mondo 50 Agie Future V" "E2425" "-1" "Yes"
3507 "EDM - RAM, CNC" "1995" "Charmilles" "Roboform 4000" "Very Good" "No" "31.05"" x 22.05"" Table, 17.72"" x 12.60"" x 16.14 Travels, 128 Amps, Custom Made Extended Tank Depth" "1995 Charmilles Roboform 4000 " "E2425" "-1" "Yes"
7174 "EDM - RAM, CNC" "1995" "Charmilles" "Roboform 20" "Charmilles" "Good" "Yes" "1995 Charmilles Roboform 20 Charmilles" "E2425" "0" "Yes"
6588 "EDM - RAM, CNC" "1999" "Charmilles" "Roboform 51" "Charmilles" "Very Good" "Yes" "1999 Charmilles Roboform 51 Charmilles" "E2425" "0" "Yes"
6586 "EDM - RAM, CNC" "2000" "Charmilles" "Roboform 22" "Charmilles" "Very Good" "Yes" "2000 Charmilles Roboform 22 Charmilles" "E2425" "0" "Yes"
3784 "EDM - RAM, CNC" "1998" "Charmilles" "Roboform 20A" "Charmilles" "Excellent" "Yes" "15.62"" x 7.87"" Table, 11.81"" x 9.8"" x 9.8"" Travels, 32 Amps, System 3R Combi Tooling, Chiller, Tansformer, Approximatley 850 Hours On Machine" "1998 Charmilles Roboform 20A Charmilles" "E2425" "-1" "Yes"
8240 "EDM - RAM, CNC" "1999" "Charmilles" "Form 4-LC ZNC" "Charmilles" "Good" "Yes" "1999 Charmilles Form 4-LC ZNC Charmilles" "E2425" "0" "Yes"
5655 "EDM - RAM, CNC" "1990/05" "Ingersoll" "IG 1000" "Ingersoll" "Good" "No" "35"" x 25"" Table, 35"" x 35"" x 25.5"" Travels, 6 ATC, 60 AMPs, 3R Tooling, Full C-Axis, Machine Reconditioned Back to Factory Specifications" "1990/05 Ingersoll IG 1000 Ingersoll" "E2425" "-1" "Yes"
8512 "EDM - RAM, CNC" "1997" "Pacific" "PC-50 EX" "Good" "Yes" "1997 Pacific PC-50 EX " "E2425" "0" "Yes"
8568 "EDM - SINKER" "1995" "Chevalier" "DM-323" "Good" "Yes" "1995 Chevalier DM-323 " "E2400" "0" "Yes"
5848 "EDM - WIRE, CNC" "1993" "Agie" "Agicut Sprint D" "Agiematic CD" "Good" "Yes" "Maximum Workpiece Size - 31.9"" x 22.8"" x 8.66"", Travels - 11.8"" x 7.8"" x 8.8"", Automatic Wire Threading and Rethreading, Linear Scales, Ebbco Chiller & Filtration System, RS-232 Port & RS-422 Ports, Wire Breakage Prevention" "1993 Agie Agicut Sprint D Agiematic CD" "E2475" "-1" "Yes"
6887 "EDM - WIRE, CNC" "1990" "Agie" "Agicut 200D" "Agiematic D" "Good" "Yes" "1990 Agie Agicut 200D Agiematic D" "E2475" "-1" "Yes"
7897 "EDM - WIRE, CNC" "1998" "Agie" "Classic 2" "Agievision 2" "Good" "Yes" "Maximum Workpiece Size - 29.5"" x 21.6"" x 9.8"", Travels - 13.8"" x 9.8"" x 10.1"" x 2.8"" x 2.8"", AWT, Manual Pulse Generator, Non-Submerged Operation, Remcor Chiller, Full Five Axis Control" "1998 Agie Classic 2 Agievision 2" "E2475" "0" "Yes"
6888 "EDM - WIRE, CNC" "1987" "Agie" "Agicut 200C" "Agiematic C" "Needs Work" "Yes" "1987 Agie Agicut 200C Agiematic C" "E2475" "0" "Yes"
7511 "EDM - WIRE, CNC" "1993" "Agie" "Sprint 70" "Agiematic CF" "Needs Repair" "Yes" "1993 Agie Sprint 70 Agiematic CF" "E2475" "-1" "Yes"
7035 "EDM - WIRE, CNC" "2001" "Charmilles" "Robofil 240" "Charmilles" "Very Good" "Yes" "2001 Charmilles Robofil 240 Charmilles" "E2475" "-1" "Yes"
7125 "EDM - WIRE, CNC" "1995" "Charmilles" "Robofil 510" "Charmilles" "Good" "No" "1995 Charmilles Robofil 510 Charmilles" "E2475" "-1" "Yes"
6899 "EDM - WIRE, CNC" "2000" "Fanuc" "Alpha 1iA" "Fanuc 18iW" "Very Good" "Yes" "2000 Fanuc Alpha 1iA Fanuc 18iW" "E2475" "0" "Yes"
6659 "EDM - WIRE, CNC" "2000" "Fanuc" "Alpha 1C-S Compact" "Fanuc 16WC" "Very Good" "Yes" "20.94"" x 13.19"" Table, 15"" x 11"" x 11.82"" x 2.364"" Travels, 34.5 Sq In / Hour, Submersible Operation, Full Five Axis Control, Many Extras" "2000 Fanuc Alpha 1C-S Compact Fanuc 16WC" "E2475" "-1" "Yes"
7249 "EDM - WIRE, CNC" "2004" "Mitsubishi" "RA-90" "Mitsubishi" "Very Good" "Yes" "2004 Mitsubishi RA-90 Mitsubishi" "E2475" "-1" "Yes"
7507 "EDM - WIRE, CNC" "2001" "Mitsubishi" "FA-20M" "Fanuc 18iW" "Very Good" "Yes" "30.71"" x 24.80"" Table, 3,300 Lbs Table Load, 19.69"" x 13.77"" x 11.81"" x 3"" Travels, 41.43"" x 11.81"" x 31.50"" Max. Workpiece, Automatic Wire Threading and Rethreading - 3rd Generation, Submerged Operation, Floppy Drive, Glass Scales, Wire Chopper, Advanced Pendant Control, Extended U & V Travels, Programmable 5th Axis" "2001 Mitsubishi FA-20M Fanuc 18iW" "E2475" "-1" "Yes"
7250 "EDM - WIRE, CNC" "1995" "Mitsubishi" "DWC-110HA" "Mitsubishi" "Good" "Yes" "1995 Mitsubishi DWC-110HA Mitsubishi" "E2475" "-1" "Yes"
6920 "EDM - WIRE, CNC" "1988" "Mitsubishi" "DWC-200H" "Mitsubishi" "Very Good" "Yes" "Table 30.71"" x 24.80"", Work Area 41.34 "" x 31.50"" x 11.61"", Travel 19.69 x 13.77"" x 11.81, 50 Amp, AWT, 14"" Color CRT, 32-Bit Multi-Tasking Control, Many Extras" "1988 Mitsubishi DWC-200H Mitsubishi" "E2475" "-1" "Yes"
6906 "EDM - WIRE, CNC" "1997" "Mitsubishi" "FX-20" "Mitsubishi" "Very Good" "Yes" "Table 30.71"" x 24.80"", Work Area 41.34 "" x 31.50"" x 11.61"", Travel 19.69 x 13.77"" x 11.81, 50 Amp, AWT, 14"" Color CRT, 32-Bit Multi-Tasking Control, Many Extras" "1997 Mitsubishi FX-20 Mitsubishi" "E2475" "0" "Yes"
5163 "EDM - WIRE, CNC" "1986" "Mitsubishi" "DWC-90H" "Mitsubishi" "Good" "Yes" "Maximum Workpiece Size - 15.75"" x 13.78"" x 6.30"", Travels - 11.81"" x 9.84"" x 11.1"" x 2.25"" x 2.25"", Submersible Operation, AWT, Upgraded Control Panel, With Less Than 2,000 Hours On It, Charmilles Fast Cut Option, Extra Z Axis Height Option" "1986 Mitsubishi DWC-90H Mitsubishi" "E2475" "-1" "Yes"
6898 "EDM - WIRE, CNC" "2001" "Mitsubishi" "FA-20M" "Fanuc 18iW" "Very Good" "Yes" "2001 Mitsubishi FA-20M Fanuc 18iW" "E2475" "0" "Yes"
7678 "EDM - WIRE, CNC" "2000" "Mitsubishi" "FX-10 K" "Mitsubishi" "Very Good" "Yes" "Table 24.80"" x 20.86"", Work Area 31.49"" x 22.63"" x 8.46"", Travel 13.77 x 9.84"" x 8.66, 50 Amp, AWT, 14"" Color CRT w/ 3-D Color Graphics, Chiller, Wire Chopper, Power Z Axis, Submerged Machining Capability, Mitsubishi AE Power Supply, Mitsubishi 32-Bit Control, Filtration System" "2000 Mitsubishi FX-10 K Mitsubishi" "E2475" "-1" "Yes"
7964 "FLAME CUTTER, CNC" "2003" "Alltra" "G14-8" "Burny 10 CNC Control" "Very Good" "Yes" "2003 Alltra G14-8 Burny 10 CNC Control" "F1925" "0" "Yes"
8010 "GEAR GENERATORS, BEVEL, SPIRAL-HYPOID" "Gould and Eberhardt" "60S" "Good" "Yes" " Gould and Eberhardt 60S " "G0980" "0" "Yes"
8039 "GEAR HOBBERS" "Gould and Eberhardt" "96H" "Good" "Yes" " Gould and Eberhardt 96H " "G1100" "-1" "Yes"
7483 "GEAR HOBBERS" "1947" "Gould and Eberhardt" "96H" "Good" "Yes" "Table Diameter 78"", Table Bore 26"", 1"" DP, Maximum Face Capacity Spur Gears 43"", Maximum Face Capacity Helical Gears 36"", Maximum Diameter Hob 10.75"", Index Worm Diameter 100"", Hobbing and Automatic Single Dividing Modes With PLC, Chip Conveyor" "1947 Gould and Eberhardt 96H " "G1100" "-1" "Yes"
7063 "GENERATORS, A.C., DIESEL DRIVEN" "2000" "Cummins" "PowerHouse - DQKC" "Very Good" "Yes" "Cummins - PowerHouse - DQKC, Output - Stand-By / Prime / Continuous (Kva) 2,500 / 2,281 / 2,000, Cummins Diesel, Onan 508 Generator, Custom Skid Mount Sound Enclosure (sound rating 75 Db @ 1 meter), Remote Radiator Cooling System, Digital Power Distribution Control Panel, Sunbelt Generator 480v @ 2,500 Kva Boost Output to 12,500v, Battery Charger and Stand-By Batteries, Completely Automatic Start-up and Operation, 20 to 25 Hours On Unit" "2000 Cummins PowerHouse - DQKC " "G2675" "-1" "Yes"
6961 "GRINDERS, CENTERLESS" "1965" "Cincinnati" "220-8" "Dirty" "No" "1965 Cincinnati 220-8 " "G4306" "-1" "Yes"
7418 "GRINDERS, CENTERLESS" "1973" "Cincinnati" "220-8" "Very Good" "Yes" "1973 Cincinnati 220-8 " "G4306" "0" "Yes"
6778 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1967" "Thompson" "3BB" "Very Good" "Yes" "1967 Thompson 3BB " "G8025" "0" "Yes"
6931 "GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ." "1962" "Thompson" "24"" x 48""" "Good" "Yes" "1962 Thompson 24"" x 48"" " "G8025" "-1" "Yes"
6776 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "1955" "Blanchard" "18-36" "Very Good" "Yes" "1955 Blanchard 18-36 " "G8100" "-1" "Yes"
7060 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "1967" "Blanchard" "22K-42" "Very Good" "Yes" "1967 Blanchard 22K-42 " "G8100" "0" "Yes"
8491 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "1980" "Blanchard" "Model 22H-D-42" "Very Good" "Yes" "42"" Table, 48"" Swing, 23"" Height Under Wheel, 22"" Grinding Wheel, 720 RPM, 100 HP, Neutrifier Magnetic Chuck Control, Segmented Grinding Wheel, Dry Base Besign with Polycon Filtration, External Coolant Filtration System and Sludge Conveyor" "1980 Blanchard Model 22H-D-42 " "G8100" "-1" "Yes"
6287 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "1973" "Blanchard" "22CK-42" "Very Good" "Yes" "1973 Blanchard 22CK-42 " "G8100" "0" "Yes"
7067 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "Blanchard" "18-36" "Very Good" "Yes" " Blanchard 18-36 " "G8100" "0" "Yes"
7059 "GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL" "Blanchard" "18-36" "Good" "Yes" " Blanchard 18-36 " "G8100" "0" "Yes"
8527 "GRINDERS, TOOL and CUTTER" "1961" "Royal Oak" "D-S" "Good" "Yes" "1961 Royal Oak D-S " "G8500" "-1" "Yes"
8164 "GRINDERS, TOOL and CUTTER, NC-CNC" "1994" "Anca" "TG-4 Fastgrind" "Anca Series 2000" "Good" "Yes" "Max. Swing 3.15"", Max. Length 15.86"", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1"" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff)" "1994 Anca TG-4 Fastgrind Anca Series 2000" "G8507" "-1" "Yes"
7451 "GRINDERS, TOOL and CUTTER, NC-CNC" "1996" "Anca" "BG-7" "Anca System 32" "Good" "Yes" "1996 Anca BG-7 Anca System 32" "G8507" "0" "Yes"
8591 "GRINDERS, TOOL and CUTTER, NC-CNC" "2001" "Ewag" "Rotoline" "NUM 1050" "Very Good" "No" "2001 Ewag Rotoline NUM 1050" "G8507" "0" "Yes"
4502 "GRINDERS, TOOL and CUTTER, NC-CNC" "2001" "ITM" "2003-EG" "Windows Based" "Very Good" "Yes" "2001 ITM 2003-EG Windows Based" "G8507" "-1" "Yes"
8606 "GRINDERS, TOOL and CUTTER, NC-CNC" "1999" "Junger" "US-560" "Fanuc 160iM" "Very Good" "Yes" "1999 Junger US-560 Fanuc 160iM" "G8507" "0" "Yes"
6053 "GRINDERS, TOOL and CUTTER, NC-CNC" "Junger" "US-450" "Fanuc 16MB" "Good" "Yes" " Junger US-450 Fanuc 16MB" "G8507" "0" "Yes"
7280 "GRINDERS, TOOL and CUTTER, NC-CNC" "1990" "Star" "ATG-6DC" "Very Good" "Yes" "1990 Star ATG-6DC " "G8507" "-1"
8613 "GRINDERS, TOOL and CUTTER, NC-CNC" "2009" "Star" "ETG Plus" "New" "Yes" "2009 Star ETG Plus " "G8507" "0" "Yes"
8612 "GRINDERS, TOOL and CUTTER, NC-CNC" "2009" "Star" "ETG" "New" "Yes" "2009 Star ETG " "G8507" "0" "Yes"
5967 "GRINDERS, TOOL and CUTTER, NC-CNC" "1996" "Unison" "4000 Super TruFlute" "Good" "No" "Max. Swing 14"", Max. Length 12"", 14"" x 8"" x 13.5"" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06" "1996 Unison 4000 Super TruFlute " "G8507" "-1" "Yes"
7711 "GRINDERS, TOOL and CUTTER, NC-CNC" "1997" "Walter" "Power Production" "Walter HMC 400" "Good" "Yes" "Maximum Tool Diameter / Length - 12.59"" / 14.46"", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment" "1997 Walter Power Production Walter HMC 400" "G8507" "-1" "Yes"
7003 "GRINDERS, TOOL and CUTTER, NC-CNC" "1997" "Walter" "Power Production" "Walter HMC 500" "Very Good" "Yes" "1997 Walter Power Production Walter HMC 500" "G8507" "0" "Yes"
7882 "GRINDERS, TOOL and CUTTER, NC-CNC" "1996" "Walter" "Helitronic Power" "Walter HMC 400" "Fair" "Yes" "Maximum Tool Diameter / Length - 10.25"" / 15.75"", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock" "1996 Walter Helitronic Power Walter HMC 400" "G8507" "-1" "Yes"
8296 "GRINDERS, TOOL and CUTTER, NC-CNC" "1999" "Walter" "Helitronic Power" "Walter HMC 500" "Good" "Yes" "Maximum Tool Diameter / Length - 10.25"" / 15.75"", Walter HMC 500 Control, Software Packages #3, 4, 11, 16, 17, Windows NT Based Controller, Fire Supression Equipment, Large Selection of Tooling, Coolant Filtration System" "1999 Walter Helitronic Power Walter HMC 500" "G8507" "0" "Yes"
7883 "GRINDERS, TOOL and CUTTER, NC-CNC" "1996" "Walter" "Helitronic Power" "Walter HMC 400" "Good" "Yes" "Maximum Tool Diameter / Length - 10.25"" / 15.75"", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock" "1996 Walter Helitronic Power Walter HMC 400" "G8507" "-1" "Yes"
7718 "HONES, HORIZONTAL" "1980" "Sunnen" "MBC-1804" "Good" "Yes" "3.75"" x 16"" Cap." "1980 Sunnen MBC-1804 " "H5975" "-1" "Yes"
7972 "HONES, HORIZONTAL" "1995" "Sunnen" "MBB-1660" "Very Good" "Yes" "1995 Sunnen MBB-1660 " "H5975" "0" "Yes"
7941 "INJECTION MOLDING, HORIZONTAL-VERTICAL" "1978" "Husky" "H388PH" "Solid State Controls" "Good" "Yes" "388 Tons, 4 oz, 14 3/4"" x 7 3/4"" Tie Bar Spacing, 12"" x 6""Platen, Ejection Force 4 Tons, Ejection Stroke 6.8"", Screw Stroke 5.9"", Hydraulic Clamping, Core Pull Option, 25mm Barrel Screw - 2oz, 32mm Barrel Screw - 4 oz, Includes Four (4) Molds" "1978 Husky H388PH Solid State Controls" "I4604" "-1" "Yes"
8130 "IRONWORKERS" "1954" "Buffalo" "Model 2 1/2" "Good" "Yes" "1954 Buffalo Model 2 1/2 " "P8915" "0" "Yes"
7934 "IRONWORKERS" "1976" "Buffalo" "Model 2 1/2 B" "Good" "Yes" "1976 Buffalo Model 2 1/2 B " "P8915" "0" "Yes"
8000 "IRONWORKERS" "2006" "Geka" "Hydracrop 110/AD" "Like New" "Yes" "2006 Geka Hydracrop 110/AD " "P8915" "-1" "Yes"
8286 "IRONWORKERS" "2009" "Lansing" "IW-55A" "New" "Yes" "2009 Lansing IW-55A " "P8915" "0" "Yes"
8434 "IRONWORKERS" "Mubea" "KBL 2.5" "Good" "Yes" " Mubea KBL 2.5 " "P8915" "0" "Yes"
7296 "LATHES, CNC, 2-AXIS, CHUCKER" "1986" "Mori-Seiki" "SL-2H" "Fanuc 10TF" "Good" "Yes" "22.4"" Swing, 4,000 RPM, 2.5"" Bar Cap., 20 / 15 HP, 12 Sta. Turret, 10"" 3-Jaw Chuck, Chip Conveyor" "1986 Mori-Seiki SL-2H Fanuc 10TF" "L2125" "-1" "Yes"
8243 "LATHES, CNC, 2-AXIS, CHUCKER" "1981" "Mori-Seiki" "SL-6B" "Fanuc OTC" "Fair" "Yes" "1981 Mori-Seiki SL-6B Fanuc OTC" "L2125" "0" "Yes"
8212 "LATHES, CNC, 2-AXIS, CHUCKER" "2000" "Mori-Seiki" "CL-203B" "Mitsubishi MSG-803" "Good" "Yes" "2000 Mori-Seiki CL-203B Mitsubishi MSG-803" "L2125" "0" "Yes"
8211 "LATHES, CNC, 2-AXIS, CHUCKER" "2000" "Mori-Seiki" "CL-203B" "Mitsubishi MSG-803" "Very Good" "Yes" "2000 Mori-Seiki CL-203B Mitsubishi MSG-803" "L2125" "0" "Yes"
8295 "LATHES, CNC, 2-AXIS, CHUCKER" "1999" "Mori-Seiki" "CL-153" "Mitsubishi MSG-803" "Very Good" "Yes" "1999 Mori-Seiki CL-153 Mitsubishi MSG-803" "L2125" "0" "Yes"
7998 "LATHES, CNC, 2-AXIS, CHUCKER" "1982" "Okuma" "LC-30 1C" "OSP-3000L" "Good" "Yes" "19.69"" Swing, 17.72"" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous Spare Parts, RS-232 Port" "1982 Okuma LC-30 1C OSP-3000L" "L2125" "-1" "Yes"
8127 "LATHES, CNC, 2-AXIS, CHUCKER" "1984" "Okuma" "LC-40 1SC / 500" "OSP-3000L" "Good" "Yes" "Swing 23.62"", 2,500 RPM, 40 HP, 12 Station Turret, Coolant System, Chip Conveyor, RS-232 Port" "1984 Okuma LC-40 1SC / 500 OSP-3000L" "L2125" "-1" "Yes"
5824 "LATHES, CNC, 2-AXIS, CHUCKER" "1998" "Okuma" "LFS-15-1SP" "OSP-700L" "Good" "Yes" "1998 Okuma LFS-15-1SP OSP-700L" "L2125" "-1" "Yes"
7402 "LATHES, CNC, 2-AXIS, CHUCKER" "1992/2007" "Okuma and Howa" "ACT 2SP-3" "Fanuc OTT" "Very Good" "Yes" "1992/2007 Okuma and Howa ACT 2SP-3 Fanuc OTT" "L2125" "0" "Yes"
5696 "LATHES, CNC, 2-AXIS, CHUCKER" "1981" "Okuma and Howa" "ACT 2SP-3" "Fanuc 6TC" "Yes" "Distance Between Spindle Centerlines 16.14"", Maximum Turning Diameter / Length - 12.20"" / 8.25"", 3,500 RPM, 20 HP, 8 Sta. Turrets, 472 Rapids, 10"" 3-Jaw Chucks, Chip Conveyors" "1981 Okuma and Howa ACT 2SP-3 Fanuc 6TC" "L2125" "-1" "Yes"
7542 "LATHES, CNC, 2-AXIS, CHUCKER" "1993" "Warner and Swasey" "2SC-18" "Fanuc 15T" "Good" "Yes" "1993 Warner and Swasey 2SC-18 Fanuc 15T" "L2125" "0" "Yes"
7450 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Amera-Seiki" "T-415" "Fanuc OiTC" "New" "Yes" "2008 Amera-Seiki T-415 Fanuc OiTC" "L2150" "-1" "Yes"
7702 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2009" "Amera-Seiki" "LT-50 / 120""" "Fanuc 0iTC" "New" "Yes" "2009 Amera-Seiki LT-50 / 120"" Fanuc 0iTC" "L2150" "0" "Yes"
7479 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1982" "American" "4025-120" "GE 1050" "Very Good" "Yes" "1982 American 4025-120 GE 1050" "L2150" "0" "Yes"
7441 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1996" "Bridgeport" "Ez-Path" "Bridgeport Ez Path" "Very Good" "Yes" "1996 Bridgeport Ez-Path Bridgeport Ez Path" "L2150" "0" "Yes"
7892 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Bridgeport" "Ez-Path" "Bridgeport Ez Path" "Good" "Yes" "16.5"" Swing, 8.6"" SOC, 40"" Centers, 3,000 RPM, 8 Sta. Power Indexing Turret, 10 HP, 8 1/4"" 3-Jaw Chuck, Teach-In Mode, Dual Electronic Handwheels, Inch / Metric Threading, New 14"" Flat Screen With Custom Housing, 3.5"" Floppy, RS-232 Port" "1994 Bridgeport Ez-Path Bridgeport Ez Path" "L2150" "-1" "Yes"
7653 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Bridgeport-Romi" "Ez-Path" "Bridgeport Ez Path" "Good" "Yes" "1994 Bridgeport-Romi Ez-Path Bridgeport Ez Path" "L2150" "0" "Yes"
8395 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Bridgeport-Romi" "EX II SD" "Bridgeport Ez Path" "Very Good" "Yes" "1998 Bridgeport-Romi EX II SD Bridgeport Ez Path" "L2150" "0" "Yes"
7058 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Cincinnati" "18U" "Vickers PC-2100" "Very Good" "Yes" "1999 Cincinnati 18U Vickers PC-2100" "L2150" "0" "Yes"
7602 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1985" "Cincinnati CNC (Milacron)" "Cintrun 18U" "Acramatic 900" "Good" "Yes" "1985 Cincinnati CNC (Milacron) Cintrun 18U Acramatic 900" "L2150" "0" "Yes"
8555 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Clausing" "K Series 2000" "Very Good" "Yes" "15.7"" Swing, 9.65"" SOC, 23"" Swing in Gap, 50"" Centers, 2,500 RPM, 2.16"" Spindle Bore, 15 HP, 8 Station Turret, 8"" 3-Jaw Hydraulic Chuck, RS-232 Port, Spindle Speed and Load Meter, Hydraulic Tailstock With Programmable Quill, Turret Tooling, Coolant System" "2001 Clausing K Series 2000 " "L2150" "-1" "Yes"
8322 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Daewoo" "Puma-400" "Mitsubishi 520L" "Very Good" "Yes" "2000 Daewoo Puma-400 Mitsubishi 520L" "L2150" "0" "Yes"
7839 "LATHES, CNC, 2-AXIS, UNIVERSAL" "Daewoo" "EcoTurn 250 S" "Fanuc" "Yes" " Daewoo EcoTurn 250 S Fanuc" "L2150" "-1" "No"
8187 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Daewoo" "Puma-300C" "Fanuc 21iT" "Very Good" "Yes" "2005 Daewoo Puma-300C Fanuc 21iT" "L2150" "0" "Yes"
7966 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Daewoo" "Puma-400" "Fanuc 18T" "Very Good" "Yes" "1999 Daewoo Puma-400 Fanuc 18T" "L2150" "0" "Yes"
7999 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1987" "Daewoo" "Puma-6HS" "Fanuc 10T" "Good" "Yes" "1987 Daewoo Puma-6HS Fanuc 10T" "L2150" "-1" "Yes"
8004 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Daewoo" "Puma-400B" "Fanuc 21iT" "Very Good" "Yes" "2005 Daewoo Puma-400B Fanuc 21iT" "L2150" "0" "Yes"
7428 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Daewoo" "Puma-12LC" "Fanuc OTC" "Good" "Yes" "1994 Daewoo Puma-12LC Fanuc OTC" "L2150" "0" "Yes"
8014 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Daewoo" "Puma-200C" "Mitsubishi 520L" "Good" "Yes" "20.08"" Swing, 13.78"" Turn Diameter, 20.8"" Centers, 4,500 RPM, 15 HP, 12 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Parts Catcher, Collet Nose, Tool Presetter, Tailstock With Programmable Quill, SMW Spacesaver 2000 Bar Feed" "1997 Daewoo Puma-200C Mitsubishi 520L" "l2150" "0" "Yes"
7433 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Daewoo" "Puma-15" "Fanuc 15T" "Good" "Yes" "1994 Daewoo Puma-15 Fanuc 15T" "L2150" "0"
7579 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1995" "Daewoo" "Puma-10HC" "Fanuc OT" "Good" "Yes" "1995 Daewoo Puma-10HC Fanuc OT" "L2150" "0" "Yes"
7503 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Dainichi" "MG-75 / 3000" "Fanuc 18T" "Very Good" "Yes" "1998 Dainichi MG-75 / 3000 Fanuc 18T" "L2150" "0" "Yes"
8158 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1995" "Dainichi" "MX-75" "Fanuc 15TF" "Very Good" "Yes" "1995 Dainichi MX-75 Fanuc 15TF" "L2150" "0" "Yes"
8037 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Doosan" "Puma-300LC" "Fanuc 21iTB" "Excellent" "Yes" "2008 Doosan Puma-300LC Fanuc 21iTB" "L2150" "-1" "Yes"
6559 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Doosan" "T-210" "Fanuc 18T" "Good" "Yes" "2001 Doosan T-210 Fanuc 18T" "L2150" "0" "Yes"
7771 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2002" "Excel" "ST-1240" "Fanuc 18T" "Very Good" "Yes" "2002 Excel ST-1240 Fanuc 18T" "L2150" "0" "Yes"
8598 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Haas" "SL-30T" "Haas 32 BIT" "Good" "Yes" "30"" Swing, 14.5"" OCS, 14.5"" Max Mach., 34"" BC, 3,400 RPM, 30 HP, 12 Sta. Turret, 3"" Bar Cap., Tailstock, 10"" 3-Jaw, Programmable Tailstock, 1 MB Expanded Memory, Geared Head, Chip Auger, Bar Feed Interface, Rigid Tapping, Delta Wye Motor, Visual Quick Code Program, Delta Wye Motor, Low Hours" "2000 Haas SL-30T Haas 32 BIT" "L2150" "0" "Yes"
8303 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2007" "Haas" "SL-40TL BB" "Haas 32 BIT" "Excellent" "Yes" "40"" Swing, 25.5"" Turn Dia., 51"" Centers, 1,400 RPM, 55 HP, 10 Sta. Turret, 18"" 3-Jaw Air Chuck With 7.1"" Hole, Tool Presetter, Programmable Hydraulic Tailstock, Big Bore Option, High Pressure Coolant (300 psi), Two Speed Geared Head, Steady Rest Provision With Schunk HTL-4 Steady Rest, Turbo Chip Conveyor, High Intensity Lighting, VOA Value Option Package-A, Long Bed Option" "2007 Haas SL-40TL BB Haas 32 BIT" "L2150" "-1" "Yes"
7772 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2006" "Haas" "SL-40TL" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas SL-40TL Haas 32 BIT" "L2150" "0" "Yes"
8620 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Haas" "SL-30T" "Haas 32 BIT" "Very Good" "Yes" "2008 Haas SL-30T Haas 32 BIT" "L2150" "0" "Yes"
8619 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Haas" "SL-30T BB" "Haas 32 BIT" "Good" "Yes" "2005 Haas SL-30T BB Haas 32 BIT" "L2150" "0" "Yes"
8050 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Haas" "SL-20T" "Haas 32 BIT" "Good" "Yes" "2004 Haas SL-20T Haas 32 BIT" "L2150" "0" "Yes"
6677 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Haas" "SL-20T" "Haas 32 BIT" "Good" "Yes" "20"" Swing, 20"" Centers, 4,000 RPM, 20 HP, 10 Sta. Turret, 8"" 3-Jaw, ProgrammableTailstock, Chip Auger, Floppy, 1 Meg of Memory, Tool Presetter, Haas Bar Feed Interface, Parts Catcher, High Intensity Lighting, Quick Code Programming, Rigid Tapping, Spindle Orientation, Custom Macros, Auto Front Door, Vector Drive, 12' LNS Single Tube Bar Feed" "1999 Haas SL-20T Haas 32 BIT" "L2150" "0" "Yes"
8411 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2007" "Haas" "TL-1" "Haas 32 BIT" "Like New" "Yes" "16"" Swing, 9.5"" SOC, 30"" Centers, 2,000 RPM, 7.5 HP, 10 Station Turret, 8"" 3-Jaw Chuck, USB Port, Coolant System, Live Center" "2007 Haas TL-1 Haas 32 BIT" "L2150" "-1" "Yes"
8049 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2003" "Haas" "SL-20T" "Haas 32 BIT" "Very Good" "Yes" "2003 Haas SL-20T Haas 32 BIT" "L2150" "0" "Yes"
7827 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Haas" "SL-10T" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas SL-10T Haas 32 BIT" "L2150" "0" "Yes"
8499 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Haas" "SL-20T" "Haas 32 BIT" "Good" "Yes" "2001 Haas SL-20T Haas 32 BIT" "L2150" "0" "Yes"
8585 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2007" "Haas" "SL-40T" "Haas 32 BIT" "Exceelent" "Yes" "40"" Swing, 25.5"" Turn Dia., 51"" Centers, 2,400 RPM, 40 HP, 10 Sta. Turret, 18"" 3-Jaw Hydraulic Chuck, Tool Presetter, 3.5"" Floppy Drive, Visual Quick Code Programming System, Chip Auger, Programmable Hydraulic Tailstock, Eithernet Option, Boom & Hoist, Color Monitor" "2007 Haas SL-40T Haas 32 BIT" "L2150" "0" "Yes"
7355 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Haas" "SL-40T BB" "Haas 32 BIT" "Very Good" "Yes" "40"" Swing, 25.5"" Turn Dia., 51"" Centers, 1,400 RPM, 55 HP, 10 Sta. Turret, 18"" 3-Jaw Air Chuck With 7.1"" Hole, Tool Presetter, Visual Quick Code, Programmable Hydraulic Tailstock, Haas Intuitive Programming System, 33"" Boring Bar Extended Tool Pocket, Spindle Orientation, Two Speed Geared Head, Remote Pulse Generator" "2005 Haas SL-40T BB Haas 32 BIT" "L2150" "0" "Yes"
8281 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2007" "Haas" "SL-10T" "Haas 32 BIT" "Excellent" "Yes" "16.25"" Swing, 8"" SOC, 6,000 RPM, 1.75 Bar Cap., 15 HP, 12 Sta. Turret, 6.5"" 3-Jaw Chuck, Ethernet Port, Tool Presetter, Programmable Tailstock, Chip Conveyor, High Pressure Coolant, Auxiliary Filter System, Automatic Parts Catcher, Only 1,000 Cutting Hours on Machine" "2007 Haas SL-10T Haas 32 BIT" "L2150" "0" "Yes"
8597 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Haas" "SL-30T" "Haas 32 BIT" "Very Good" "Yes" "30"" Swing, 14.5"" OCS, 14.5"" Max Mach., 34"" BC, 3,400 RPM, 30 HP, 12 Sta. Turret, 3"" Bar Cap., Tailstock, 10"" 3-Jaw, Programmable Tailstock, 1 MB Expanded Memory, Tool Presetter, Geared Head, Chip Auger, Bar Feed Interface, Rigid Tapping, BOT Turret Type, High Intensity Lighting, Visual Quick Code Program, Spindle Orientation" "2005 Haas SL-30T Haas 32 BIT" "L2150" "0" "Yes"
8614 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2006" "Haas" "SL-30T BB" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas SL-30T BB Haas 32 BIT" "L2150" "0" "Yes"
8287 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Haas" "SL-10T" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas SL-10T Haas 32 BIT" "L2150" "0" "Yes"
7690 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Harrison" "Alpha 400 Plus" "Harrison / Fanuc Control" "Good" "Yes" "1999 Harrison Alpha 400 Plus Harrison / Fanuc Control" "L2150" "0" "Yes"
7404 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Harrison" "Alpha 400 Plus" "Harrison / Fanuc Control" "Very Good" "Yes" "1997 Harrison Alpha 400 Plus Harrison / Fanuc Control" "L2150" "0" "Yes"
7510 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1984" "Hitachi-Seiki" "4NE-600" "Fanuc 6T" "Good" "No" "1984 Hitachi-Seiki 4NE-600 Fanuc 6T" "L2150" "0" "Yes"
6439 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1986" "Hitachi-Seiki" "4NE-600" "Fanuc 6TB" "Good" "Yes" "1986 Hitachi-Seiki 4NE-600 Fanuc 6TB" "L2150" "0" "Yes"
8043 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1986" "Hitachi-Seiki" "Hitec-Turn 20" "Seicos Multi" "Good" "Yes" "17.7"" Swing, 11.2"" OCS, 16"" Centers, 3,600 RPM, 15 HP, 10 Station Turret, 8"" 3-Jaw Hydraulic Chuck, Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port, Turret Tooling, Coolant System, Chip Conveyor, Conversational Control" "1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi" "L2150" "-1" "Yes"
7072 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1995" "Hitachi-Seiki" "Hitec-Turn 20SII" "Yasnac I80" "Good" "Yes" "1995 Hitachi-Seiki Hitec-Turn 20SII Yasnac I80" "L2150" "-1" "On Way"
8019 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1986" "Hitachi-Seiki" "Hitec-Turn 20" "Fanuc 10T" "Very Good" "Yes" "1986 Hitachi-Seiki Hitec-Turn 20 Fanuc 10T" "L2150" "0" "Yes"
5852 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Hitachi-Seiki" "Hitec-Turn 23 SII" "Seicos Multi" "Good" "Yes" "1997 Hitachi-Seiki Hitec-Turn 23 SII Seicos Multi" "L2150" "-1" "Yes"
6438 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1985" "Hitachi-Seiki" "4NE-600" "Fanuc 6TB" "Good" "Yes" "1985 Hitachi-Seiki 4NE-600 Fanuc 6TB" "L2150" "0" "Yes"
6993 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1985" "Hitachi-Seiki" "5NE 1100" "Fanuc 6TB" "Good" "Yes" "1985 Hitachi-Seiki 5NE 1100 Fanuc 6TB" "L2150" "0" "Yes"
8018 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1988" "Hitachi-Seiki" "Hitec-Turn 25S" "Fanuc 10TF" "Very Good" "Yes" "1988 Hitachi-Seiki Hitec-Turn 25S Fanuc 10TF" "L2150" "0" "Yes"
6612 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1990" "Hitachi-Seiki" "Hitec-Turn 20II" "Yasnac I80" "Good" "Yes" "1990 Hitachi-Seiki Hitec-Turn 20II Yasnac I80" "L2150" "-1" "Yes"
7860 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1982" "Hitachi-Seiki" "4NE-600" "Fanuc 6T" "Good" "Yes" "1982 Hitachi-Seiki 4NE-600 Fanuc 6T" "L2150" "0" "Yes"
7378 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Hwacheon" "Mega 95" "Fanuc 21T" "Good" "Yes" "1999 Hwacheon Mega 95 Fanuc 21T" "l2150" "0" "Yes"
8334 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2003" "Hwacheon" "Mega 55" "Fanuc 21TB" "Good" "Yes" "2003 Hwacheon Mega 55 Fanuc 21TB" "L2150" "0" "Yes"
5822 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1995" "Hyundai" "HiT-8S" "Hitrol 840C-EZ" "Good" "Yes" "11.81"" Swg, 20.5 Centers, 6,000 RPM, 11 HP, 8 Station Turret, HiT-8S, Tool Presetter" "1995 Hyundai HiT-8S Hitrol 840C-EZ" "L2150" "-1" "Yes"
6202 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Lansing" "AB-11 / 15-G" "Fanuc 18T" "New - Never Used" "Yes" "2005 Lansing AB-11 / 15-G Fanuc 18T" "L2150" "0" "Yes"
7051 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Lansing" "Model G" "Fagor 8050 TC" "Very Good" "Yes" "2004 Lansing Model G Fagor 8050 TC" "L2150" "0" "Yes"
5843 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Lansing" "CK35120" "Fagor 8050TC" "Like New" "Yes" "2005 Lansing CK35120 Fagor 8050TC" "L2150" "0" "Yes"
7242 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2005" "Leadwell" "LTC-50BL" "Fanuc OiTC" "Very Good" "Yes" "2005 Leadwell LTC-50BL Fanuc OiTC" "L2150" "0" "Yes"
7118 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1970/97" "Lodge and Shipley" "Profiturn 40" "Fanuc 18T" "Very Good" "Yes" "1970/97 Lodge and Shipley Profiturn 40 Fanuc 18T" "L2150" "0" "Yes"
5857 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Mas" "Masturn 50" "Fagler 800 TGI" "Like New" "Yes" "1999 Mas Masturn 50 Fagler 800 TGI" "L2150" "-1" "Yes"
8078 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Mazak" "Super Quick Turn-15" "Mazatrol T-PLUS" "Good" "Yes" "1997 Mazak Super Quick Turn-15 Mazatrol T-PLUS" "L2150" "-1" "Yes"
7086 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1991" "Mazak" "Slant Turn-50" "Mazatrol T-32-2" "Very Good" "Yes" "1991 Mazak Slant Turn-50 Mazatrol T-32-2" "L2150" "0" "Yes"
7480 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1980" "Mazak" "Powermaster R3000" "Fanuc 20C" "Good" "Yes" "1980 Mazak Powermaster R3000 Fanuc 20C" "L2150" "0" "Yes"
8083 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1978" "Mazak" "M-5" "Fanuc 2000C" "Good" "Yes" "1978 Mazak M-5 Fanuc 2000C" "L2150" "-1" "Yes"
7794 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1984" "Mazak" "Quick Turn-10N" "Mazatrol T-2" "Fair" "Yes" "17.6"" Swing, 20"" Centers, 5,000 RPM, 12 Sta. Turret, 20 HP, 5C Collet Nose, Hydraulic Tailstock, Tool Eye" "1984 Mazak Quick Turn-10N Mazatrol T-2" "L2150" "-1" "Yes"
6050 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1980" "Mazak" "M-4 / 1500" "Fanuc 6TB" "Good" "Yes" "1980 Mazak M-4 / 1500 Fanuc 6TB" "L2150" "-1" "Yes"
7115 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Mazak" "Quick Turn-28N" "Mazatrol T-PLUS" "Good" "Yes" "1994 Mazak Quick Turn-28N Mazatrol T-PLUS" "L2150" "-1" "Yes"
8099 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Mazak" "Quick Turn-20" "Mazatrol T-PLUS" "Good" "Yes" "1997 Mazak Quick Turn-20 Mazatrol T-PLUS" "L2150" "0" "Yes"
7143 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Mazak" "M-5 / 3000" "Fanuc 6T" "Good" "Yes" "1981 Mazak M-5 / 3000 Fanuc 6T" "L2150" "0" "Yes"
6654 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Mazak" "Quick Turn-35N / 1000" "Mazatrol T-32-2" "Good" "Yes" "1994 Mazak Quick Turn-35N / 1000 Mazatrol T-32-2" "L2150" "0" "Yes"
8077 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1996" "Mazak" "Super Quick Turn-15N" "Mazatrol T-32-2" "Good" "Yes" "1996 Mazak Super Quick Turn-15N Mazatrol T-32-2" "L2150" "-1" "Yes"
8254 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Mazak" "Quick Turn-250" "Mazatrol Fusion 640 T" "Very Good" "Yes" "23.65 Swing, 10.5"" SOC, 15.70 Turn Dia., 19.68"" Turn Length, 5,000 RPM, 2.75 Bore, 20 HP, 12 Station Turret, 8"" 3-Jaw Hydraulic Chuck, Tailstock, Automatic Tool Eye" "2000 Mazak Quick Turn-250 Mazatrol Fusion 640 T" "L2150" "-1" "Yes"
7844 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1984" "Mazak" "Quick Turn-10N" "Mazatrol T-1" "Fair" "No" "17.6"" Swing, 20"" Centers, 5,000 RPM, 8 Sta. Turret, 20 HP, 6.5"" 3-Jaw Chuck, Hydraulic Tailstock, Never Cut Steel - Grapite Only" "1984 Mazak Quick Turn-10N Mazatrol T-1" "L2150" "-1" "Yes"
5715 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Mazak" "Slant Turn-15" "Mazatrol T-1" "Yes" "1981 Mazak Slant Turn-15 Mazatrol T-1" "L2150" "-1" "Yes"
7104 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1992" "Mazak" "Quick Turn-15N" "Mazatrol T-32B" "Very Good" "Yes" "1992 Mazak Quick Turn-15N Mazatrol T-32B" "L2150" "0" "Yes"
8170 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Mazak" "Nexus Quick Turn-100" "Mazatrol Fusion 640T" "Very Good" "Yes" "2004 Mazak Nexus Quick Turn-100 Mazatrol Fusion 640T" "L2150" "0" "Yes"
7395 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1984" "Mazak" "Quick Turn-35" "Mazatrol T-2" "Fair" "No" "1984 Mazak Quick Turn-35 Mazatrol T-2" "L2150" "-1" "Yes"
7320 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Mazak" "Quick Turn-35N / 1000" "Mazatrol T-32-2" "Very Good" "Yes" "1994 Mazak Quick Turn-35N / 1000 Mazatrol T-32-2" "l2150" "0" "Yes"
7397 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2002" "Mazak" "Quick Turn-200 HP" "Mazatrol Fusion 640 T" "Very Good" "Yes" "18.5"" Swg, 12.4"" Centers, 4,000 RPM, 15 HP, 12 Sta., Tailstock, ATS 3J Collet Chuck, Manual Tool Eye, Graphic Display, Parts Catcher" "2002 Mazak Quick Turn-200 HP Mazatrol Fusion 640 T" "L2150" "-1" "Yes"
8163 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Mazak" "Powermaster 1500" "Fanuc 6TB" "Good" "Yes" "1981 Mazak Powermaster 1500 Fanuc 6TB" "L2150" "0" "Yes"
8107 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1996" "Mazak" "Quick Turn-30N" "Mazatrol T-PLUS" "Good" "Yes" "1996 Mazak Quick Turn-30N Mazatrol T-PLUS" "L2150" "0" "Yes"
7943 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1986" "Mazak" "Slant Turn-40" "Mazatrol T-2" "Good" "Yes" "1986 Mazak Slant Turn-40 Mazatrol T-2" "L2150" "0" "Yes"
8312 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1979" "Mazak" "M-5" "Fanuc 6T" "Good" "Yes" "1979 Mazak M-5 Fanuc 6T" "L2150" "0" "Yes"
6427 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1988" "Mazak" "Quick Turn-10N" "Mazatrol T-2" "Very Good" "Yes" "1988 Mazak Quick Turn-10N Mazatrol T-2" "L2150" "0" "Yes"
6049 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1979" "Mazak" "M-4 / 1000" "Fanuc 6TB" "Good" "Yes" "30"" Swg., 60"" Centers, 21.7"" x 62"" Travels, 2,200 RPM, 25 HP, 4 & 6 Position Turrets, 10""-3 Jaw Chuck, Chip Conveyor" "1979 Mazak M-4 / 1000 Fanuc 6TB" "L2150" "-1" "Yes"
7754 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1991" "Mazak " "Slant Turn-60" "Mazatrol T-32-2" "Good" "Yes" "1991 Mazak Slant Turn-60 Mazatrol T-32-2" "L2150" "0" "Yes"
7645 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Milltronics" "ML-14" "Centurion V" "Very Good" "Yes" "1997 Milltronics ML-14 Centurion V" "L2150" "0" "Yes"
7613 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Milltronics" "ML-17" "Centurion V" "Good" "Yes" "1998 Milltronics ML-17 Centurion V" "L2150" "-1" "Yes"
7486 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1992" "Miyano" "BNC-34C" "Fanuc 0T" "Good" "Yes" "10.5"" Swing, 4 1/16"" Max. Turning Dia., 9"" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts Catcher, RS-232 Port, Tool Holders" "1992 Miyano BNC-34C Fanuc 0T" "L2150" "-1" "Yes"
7705 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1997" "Monarch" "Series 220" "Fanuc 15TA" "Very Good" "Yes" "1997 Monarch Series 220 Fanuc 15TA" "L2150" "0" "Yes"
7117 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2006" "Mori-Seiki" "SL-603D / 1000" "Fanuc 18iTA" "Very Good" "Yes" "2006 Mori-Seiki SL-603D / 1000 Fanuc 18iTA" "L2150" "0" "Yes"
7113 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1991" "Mori-Seiki" "SL-75B" "Fanuc 15T" "Good" "Yes" "1991 Mori-Seiki SL-75B Fanuc 15T" "L2150" "0" "Yes"
8308 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Mori-Seiki" "NL-2500 / 700" "Mori-Seiki MSX-850 III" "Very Good" "Yes" "2004 Mori-Seiki NL-2500 / 700 Mori-Seiki MSX-850 III" "L2150" "0" "Yes"
8307 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Mori-Seiki" "SL-253 B / 500" "Fanuc MSG-501" "Very Good" "Yes" "2001 Mori-Seiki SL-253 B / 500 Fanuc MSG-501" "L2150" "0" "Yes"
7979 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Mori-Seiki" "SL-7B" "Fanuc 6TB" "Good" "Yes" "35.8"" Swing, 22.8"" SOC, 68.8"" Centers, 1,010 RPM, 12 Sta. Turret, 40 HP, 21 1/2"" 3-Jaw Hydraulic Chuck, Programmable Hydraulic Tailstock, Flood Coolant System, Chip Conveyor" "1981 Mori-Seiki SL-7B Fanuc 6TB" "L2150" "-1" "Yes"
7456 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Mori-Seiki" "SL-303A/1500" "Mitsubishi MSC-501TA" "Good" "Yes" "2001 Mori-Seiki SL-303A/1500 Mitsubishi MSC-501TA" "L2150" "0" "Yes"
7813 "ROLLS, PLATE BENDING, INITIAL PINCH" "1972" "Bertsch" "Good" "Yes" "1972 Bertsch " "R5603" "0" "No"
7048 "ROLLS, PLATE BENDING, INITIAL PINCH" "Bertsch" "10' x 1/2""" "Good" "Yes" " Bertsch 10' x 1/2"" " "R5603" "0" "Yes"
7812 "ROLLS, PLATE BENDING, INITIAL PINCH" "1962" "Bertsch" "Model 7" "Good" "Yes" "1962 Bertsch Model 7 " "R5603" "0" "Yes"
7791 "ROLLS, PLATE BENDING, INITIAL PINCH" "1963" "Bertsch" "Model 7" "Good" "Yes" "1963 Bertsch Model 7 " "R5603" "0" "Yes"
7790 "ROLLS, PLATE BENDING, INITIAL PINCH" "1967" "Bertsch" "Model 9" "Very Good" "Yes" "1967 Bertsch Model 9 " "R5603" "0" "Yes"
7116 "ROLLS, PLATE BENDING, INITIAL PINCH" "1985" "Bertsch" "Model 22" "Good" "Yes" "1985 Bertsch Model 22 " "R5603" "0" "Yes"
7910 "ROLLS, PLATE BENDING, INITIAL PINCH" "1970" "Bertsch" "Model 11" "Very Good" "Yes" "1970 Bertsch Model 11 " "R5603" "0" "Yes"
6441 "ROLLS, PLATE BENDING, INITIAL PINCH" "2007" "Cole-Tuve" "PRH-10-500" "New" "No" "2007 Cole-Tuve PRH-10-500 " "R5603" "0" "No"
6440 "ROLLS, PLATE BENDING, INITIAL PINCH" "2007" "Cole-Tuve" "PRH-10-460" "New" "No" "2007 Cole-Tuve PRH-10-460 " "R5603" "0" "No"
6800 "ROLLS, PLATE BENDING, INITIAL PINCH" "1968" "Domnarvet" "PV-5" "Good" "Yes" "1968 Domnarvet PV-5 " "R5603" "0" "Yes"
7095 "ROLLS, PLATE BENDING, INITIAL PINCH" "1981" "Haeusler" "10' x 5/8""" "Very Good" "Ys" "1981 Haeusler 10' x 5/8"" " "R5603" "0" "Yes"
7054 "ROLLS, PLATE BENDING, INITIAL PINCH" "1982" "Montgomery" "16862H" "Good" "Yes" "1982 Montgomery 16862H " "R5603" "0" "Yes"
7957 "ROLLS, PLATE BENDING, INITIAL PINCH" "1993" "Montgomery" "12050H" "Very Good" "Yes" "1993 Montgomery 12050H " "R5603" "0" "Yes"
7993 "ROLLS, PLATE BENDING, INITIAL PINCH" "1994" "Montgomery" "RS8-10" "Very Good" "Yes" "1994 Montgomery RS8-10 " "R5603" "0" "Yes"
7988 "ROLLS, PLATE BENDING, INITIAL PINCH" "Niagara" "Model 349" "Good" "Yes" " Niagara Model 349 " "R5603" "0" "Yes"
7068 "ROLLS, PLATE BENDING, INITIAL PINCH" "Webb" "9L 1208" "Good" "Yes" " Webb 9L 1208 " "R5603" "0" "Yes"
7981 "ROLLS, PLATE BENDING, INITIAL PINCH" "Webb" "6L" "Good" "Yes" " Webb 6L " "R5603" "0" "Yes"
8414 "ROLLS, PLATE BENDING, INITIAL PINCH" "Webb" "6L" "Good" "Yes" " Webb 6L " "R5603" "0" "Yes"
7168 "ROLLS, PLATE BENDING, PYRAMID TYPE" "1974" "Bertsch" "Model 9" "Good" "Yes" "1974 Bertsch Model 9 " "R5610" "0" "Yes"
7201 "ROLLS, PLATE BENDING, PYRAMID TYPE" "Fisher" "12' x 1/2""" "Good" "Yes" " Fisher 12' x 1/2"" " "R5610" "0" "Yes"
7214 "ROLLS, PLATE BENDING, PYRAMID TYPE" "1968" "National" "XZMP 3150/10" "Needs Some Work" "No" "1968 National XZMP 3150/10 " "R5610" "-1" "Yes"
8407 "ROLLS, PLATE BENDING, PYRAMID TYPE" "1977" "Roundo" "PS310" "Very Good" "Yes" "1977 Roundo PS310 " "R5610" "0" "Yes"
6729 "ROUTERS, NC and CNC" "2003" "AXYZ Automation" "Model 4010" "Good" "Yes" "168"" x 16"" Table, 150"" x 16"" x 18"" Travels, 24,000 RPM, 30 Taper, 10 HP, Fog Buster Dual Wand Mister Lubricator, Desoutter AFDE430 Electric Drill with Pneumatic Ram, S-Mouse Rapid Material Surface / Tool Tip Sensor, Toolpath For Windows Interface Software C/W 2D & 3D Engraving Module, Remote Jog Handle" "2003 AXYZ Automation Model 4010 " "R8906" "-1" "Yes"
7352 "ROUTERS, NC and CNC" "1990" "Komo" "VR-512" "Fanuc GNO" "Good" "Yes" "1990 Komo VR-512 Fanuc GNO" "R8906" "0" "Yes"
7360 "ROUTERS, NC and CNC" "1998" "Komo" "Innova 408" "Fanuc 210" "Very Good" "Yes" "1998 Komo Innova 408 Fanuc 210" "R8906" "0" "Yes"
8358 "SAWS, BAND, HORIZONTAL" "1988" "Amada" "H-450H" "Good" "Yes" "1988 Amada H-450H " "S0653" "0" "Yes"
7953 "SAWS, BAND, HORIZONTAL" "1996" "Behringer" "HBP-800 / 850" "Good" "Yes" "1996 Behringer HBP-800 / 850 " "S0653" "0" "Yes"
7912 "SAWS, BAND, HORIZONTAL" "2007" "Cosen" "C-300 NC" "SNC-20" "Very Good" "Yes" "Capactiy 11.8"" x 13.4"", 12"" Round, 328 FPM, 5 HP, 15.9"" Stock Indexing, Discharge Tray, Control Console, Hydaulic Stock-Feeding and Clamping Vises, Hydraulic Saw Up-Feed and Down-Feed, Hydraulic Band Tension, Coolant System, In-Feed Table, Fully Automatic, Automatic Kerf Loss Compensation, Automatic Multiple Indexing up to 650"", Chip Conveyor, Blade Life Indicator, CNC Controlled" "2007 Cosen C-300 NC SNC-20" "S0653" "-1" "Yes"
7083 "SAWS, BAND, HORIZONTAL" "2007" "Cosen" "SH-4030" "Like New" "Yes" "2007 Cosen SH-4030 " "S0653" "-1" "Yes"
7660 "SAWS, BAND, HORIZONTAL" "1997" "Danobat" "CPI-70-50 DI" "Very Good" "Yes" "1997 Danobat CPI-70-50 DI " "S0653" "0" "Yes"
7668 "SAWS, BAND, HORIZONTAL" "1991" "Forte" "SBA-41/S" "Good" "Yes" "1991 Forte SBA-41/S " "S0653" "0" "Yes"
6790 "SAWS, BAND, HORIZONTAL" "1989" "HEM" "1600-A" "Rebuilt" "Yes" "1989 HEM 1600-A " "S0653" "0" "Yes"
7085 "SAWS, BAND, HORIZONTAL" "2006" "Hyd-Mech" "S-20P III" "Very Good" "No" "13"" x 18"" Capacity, 13"" Round, 3 HP, Miter, Coolant Tank and Pump, Out of Stock Limit Switch, Fully Automatic, In-Feed Roller Table, Outfeed Table, Powered Chip Brush, Variable Vise Pressure, Positive Downfeed, Overhead Bundling" "2006 Hyd-Mech S-20P III " "S0653" "-1" "Yes"
7655 "SAWS, BAND, HORIZONTAL" "1997" "Kasto" "HBA-360" "Very Good" "Yes" "1997 Kasto HBA-360 " "S0653" "0" "Yes"
6766 "SAWS, BAND, HORIZONTAL" "1985" "Marvel" "15A" "Good" "Yes" "Capactiy 16"" X 20"", 12 3/4"" Round, 400 FPM, 7.5 HP, 72"" Stock Indexing, 45 Miter, Discharge Tray, Control Console, Hydaulic Stock-Feeding and Clamping Vises, Hydraulic Saw Up-Feed and Down-Feed, Hydraulic Band Tension, Coolant System, In-Feed Table" "1985 Marvel 15A " "S0653" "-1" "Yes"
8487 "SAWS, BAND, HORIZONTAL" "2005" "Sharp" "250A" "Very Good" "Yes" "2005 Sharp 250A " "S0653" "-1" "Yes"
8345 "SAWS, BAND, HORIZONTAL" "1979" "Summit" "500 SA" "Fair" "Yes" "1979 Summit 500 SA " "S0653" "0" "Yes"
7672 "SAWS, BAND, HORIZONTAL" "1984" "Wells" "1216HA" "Good" "Yes" "1984 Wells 1216HA " "S0653" "0" "Yes"
7669 "SAWS, BAND, HORIZONTAL" "1997" "Wells" "W-10-2A" "Good" "Yes" "1997 Wells W-10-2A " "S0653" "0" "Yes"
7656 "SAWS, BAND, HORIZONTAL" "1996" "Wells" "F-16-2" "Good" "Yes" "1996 Wells F-16-2 " "S0653" "0" "Yes"
7293 "SAWS, BAND, VERTICAL" "1995" "HEM" "V-100 LM-2" "Very Good" "Yes" "1995 HEM V-100 LM-2 " "S0690" "0" "Yes"
7693 "SAWS, BAND, VERTICAL" "1999" "Hyd-Mech" "V-18 APC" "Good" "Yes" "1999 Hyd-Mech V-18 APC " "S0690" "-1" "Yes"
8034 "SAWS, BAND, VERTICAL" "1995" "Hyd-Mech" "V-18" "Very Good" "Yes" "1995 Hyd-Mech V-18 " "S0690" "0" "Yes"
7756 "SAWS, BAND, VERTICAL" "1998" "Marvel" "Series 8 Mark II" "Very Good" "Yes" "1998 Marvel Series 8 Mark II " "S0690" "0" "Yes"
7762 "SAWS, BAND, VERTICAL" "1984" "Marvel" "Series 8 Mark I" "Good" "Yes" "1984 Marvel Series 8 Mark I " "S0690" "0" "Yes"
7248 "SAWS, BAND, VERTICAL" "2000" "Marvel" "81A 11 PC" "Very Good" "Yes" "2000 Marvel 81A 11 PC " "S0690" "0" "Yes"
7758 "SAWS, BAND, VERTICAL" "1987" "Marvel" "Series 8 Mark I" "Good" "Yes" "1987 Marvel Series 8 Mark I " "S0690" "0" "Yes"
7759 "SAWS, BAND, VERTICAL" "1986" "Marvel" "Series 8 Mark I" "Good" "Yes" "1986 Marvel Series 8 Mark I " "S0690" "0" "Yes"
7251 "SAWS, BAND, VERTICAL" "1993" "Marvel" "81A 10 PC" "Fair" "Yes" "1993 Marvel 81A 10 PC " "S0690" "0" "Yes"
7244 "SAWS, BAND, VERTICAL" "1988" "Marvel" "81-9" "Very Good" "Yes" "1988 Marvel 81-9 " "S0690" "0" "Yes"
7760 "SAWS, BAND, VERTICAL" "1985" "Marvel" "Model 81" "Fair" "Yes" "1985 Marvel Model 81 " "S0690" "0" "Yes"
7150 "SAWS, BAND, VERTICAL" "1996" "Marvel" "Series 8 Mark II" "Very Good" "Yes" "1996 Marvel Series 8 Mark II " "S0690" "0" "Yes"
7769 "SAWS, BAND, VERTICAL" "1989" "Marvel" "Model 81-9" "Good" "Yes" "1989 Marvel Model 81-9 " "S0690" "0" "Yes"
7213 "SAWS, BAND, VERTICAL" "2000" "Peerless" "VB-181C" "Very Good" "Yes" "2000 Peerless VB-181C " "S0690" "0" "On Way"
6763 "SAWS, COLD and CARBIDE" "1999" "Macc" "NTS-350" "Good" "No" "Material Thickness Round Bar 3.937"", Round Tube 4.724"", Square 3.937"", Rectangle 6.7"" x 3.937"", 14"" Blade Diameter, Swivel Head, Automatic Operation, Automatic Vice Open and Close" "1999 Macc NTS-350 " "S0805" "-1" "Yes"
7183 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1987" "Mori-Seiki" "SL-OH" "Fanuc 10T" "Very Good" "Yes" "Swing Over Bed 7.5"", Swing Over Saddle 7.5"", Maximum Turning Diameter 8.3"", Length 16.5"", 6,000 RPM, 7.5 HP, 8 Sta. Turret, Tailstock, 6"" 3-Jaw and 2-Jaw Hydraulic Chucks, Turbo Chip Conveyor, Hydraulic Tailstock" "1987 Mori-Seiki SL-OH Fanuc 10T" "L2150" "-1" "Yes"
7541 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Mori-Seiki" "SL-35B/750" "Fanuc 16T" "Good" "Yes" "1994 Mori-Seiki SL-35B/750 Fanuc 16T" "L2150" "0" "Yes"
8162 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Mori-Seiki" "CL-203B" "Mitsubishi MSG-803" "Good" "Yes" "2000 Mori-Seiki CL-203B Mitsubishi MSG-803" "L2150" "0" "Yes"
7272 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1988" "Mori-Seiki" "SL-65C" "Fanuc 10T" "Good" "Yes" "1988 Mori-Seiki SL-65C Fanuc 10T" "L2150" "0" "Yes"
5589 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Mori-Seiki" "SL-1" "Fanuc 6T" "Good" "Yes" "16.5"" Swing, 6.2"" Max. Turning, 4,500 RPM, 10 HP, 8 Station Turret, Hydraulic Tailstock, 6"" Collet Chuck, Four (4) ID (boring) and Four (4) OD (turning) Holders, RS-232 Port" "1981 Mori-Seiki SL-1 Fanuc 6T" "L2150" "-1" "Yes"
8518 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Mori-Seiki" "NL-1500 / 500" "Mori-Seiki MSX-850" "Very Good" "Yes" "2004 Mori-Seiki NL-1500 / 500 Mori-Seiki MSX-850" "L2150" "0" "Yes"
7415 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1980" "Mori-Seiki" "SL-4A" "Yasnac 2000C" "Needs Repair" "Yes" "1980 Mori-Seiki SL-4A Yasnac 2000C" "L2150" "-1" "Yes"
8397 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Mori-Seiki" "CL-200B" "MSC-803L" "Very Good" "Yes" "Swing 20.28"", Swing Over Cross Slide 9.5"", Maximum Turning Diameter 16.14"", Length 14.6"", 3,500 RPM, 15 HP, 10 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Chip Conveyor, Chuck Jaws, RS-232 Port, Tool Eye, Conversational Control With Tool Path Graphics, Only 7,427 Power On, 2,137 Cycle Start Hours" "1998 Mori-Seiki CL-200B MSC-803L" "L2150" "-1" "Yes"
7241 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1985" "Mori-Seiki" "SL-6B" "Fanuc 6TB" "Good" "Yes" "1985 Mori-Seiki SL-6B Fanuc 6TB" "L2150" "0" "Yes"
6584 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1987" "Mori-Seiki" "SL-6A" "Fanuc 11T" "Needs Repair" "No" "1987 Mori-Seiki SL-6A Fanuc 11T" "L2150" "0" "Yes"
7887 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Nakamura-Tome" "TMC-300C" "Fanuc 16T" "Good" "Yes" "1994 Nakamura-Tome TMC-300C Fanuc 16T" "L2150" "0" "Yes"
8340 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Okuma" "Crown L-106 SB" "OSP-U100L" "Very Good" "Yes" "2001 Okuma Crown L-106 SB OSP-U100L" "L2150" "-1" "Yes"
8125 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Okuma" "Captain L-370 BB" "OSP-E100L" "Very Good" "Yes" "Swing Over Bed 20.8"", Swing Over Saddle 16.54"", Maximum Turning Diameter 14.56"", Length 20"", 3,800 RPM, 30 HP, 12 Sta. Turret, Tailstock, Tool Presetter, 10"" 3-Jaw Chuck, Chip Conveyor, Bar Feed Interface" "2001 Okuma Captain L-370 BB OSP-E100L" "L2150" "-1" "Yes"
8033 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1980" "Okuma" "LC-40 1SC / 1000" "OSP-2200" "Fair" "Yes" "1980 Okuma LC-40 1SC / 1000 OSP-2200" "L2150" "0" "Yes"
8485 "LATHES, CNC, 2-AXIS, UNIVERSAL" "199??" "Okuma" "LB-15" "OSP-5020L" "Fair" "Yes" "199?? Okuma LB-15 OSP-5020L" "L2150" "-1" "Yes"
8260 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1993" "Okuma" "LB-25" "OSP-5020LG" "Fair" "Yes" "1993 Okuma LB-25 OSP-5020LG" "L2150" "-1" "Yes"
6952 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Okuma" "Crown BB" "OSP-700L" "Good" "Yes" "1998 Okuma Crown BB OSP-700L" "L2150" "0" "Yes"
5671 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1980" "Okuma" "LH-35" "OSP-2200L" "Good" "Yes" "24"" Swing, 60"" Centers, 2,200 RPM, 3.54"" Bar Cap., 30 HP, 4 + 6 Station Turrets, 15"" 3-Jaw Air Chuck, Tailstock With Hydraulic Quill, Twenty Five (25) Sets of Jaws and Complete Jaw Insert System" "1980 Okuma LH-35 OSP-2200L" "L2150" "-1" "Yes"
7722 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1989" "Okuma" "LB-25" "OSP-5000LG" "Good" "Yes" "1989 Okuma LB-25 OSP-5000LG" "L2150" "0" "Yes"
7368 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1995" "Okuma" "LNC-8C BB" "OSP-5020L" "Excellent" "Yes" "21.65"" Swg, 20"" Centers, 3,500 RPM, 10 Sta., Tailstock, 10"" 3-Jaw Hydraulic Chuck, Chip Conveyor, Color Graphics Control, IGF" "1995 Okuma LNC-8C BB OSP-5020L" "L2150" "0" "Yes"
8238 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2007" "Okuma" "Captain L-370 BB" "OSP-P200L" "Like New" "Yes" "2007 Okuma Captain L-370 BB OSP-P200L" "L2150" "0" "Yes"
7362 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Okuma" "Crown L-1420 / 650 BB" "OSP-U10L" "Good" "Yes" "24.41 Swing, 18.90"" S.O.C. , 14.17"" Turning Dia., 27"" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15"" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF, Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B" "2000 Okuma Crown L-1420 / 650 BB OSP-U10L" "L2150" "-1" "Yes"
7055 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Okuma" "Crown 762 SB" "OSP-700L" "Very Good" "Yes" "1998 Okuma Crown 762 SB OSP-700L" "L2150" "0" "Yes"
7902 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1998" "Okuma" "Crown BB" "OSP-700L" "Good" "Yes" "1998 Okuma Crown BB OSP-700L" "L2150" "0" "Yes"
7901 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Okuma" "Crown L-1420 / 650" "OSP-U10L" "Good" "Yes" "2001 Okuma Crown L-1420 / 650 OSP-U10L" "L2150" "0" "Yes"
5845 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1982" "Okuma" "LC-30 1SC / 1000" "OSP-3000L" "Good" "Yes" "19.69"" Swing, 16.14 SOC, 17.72 Max. Dia., 38.58 Length, 2.5"" Bar Cap., 30 HP, 12 Sta. Turret, Tailstock, 12"" 3-Jaw Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, RS-232 Port" "1982 Okuma LC-30 1SC / 1000 OSP-3000L" "L2150" "-1" "Yes"
7900 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Okuma" "Crown L-1420 / 1250" "OSP-U10L" "Good" "Yes" "24.41"" Swing, 50"" BC, 2,800 RPM, 4.33 Bore, 30 HP, 12 Sta. Turret, 15"" 3-Jaw Hydraulic Chuck, Chip Conveyor" "2000 Okuma Crown L-1420 / 1250 OSP-U10L" "L2150" "0" "Yes"
8264 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2001" "Okuma" "Crown L-1060 BB" "OSP-700L" "Very Good" "Yes" "2001 Okuma Crown L-1060 BB OSP-700L" "L2150" "0" "Yes"
8261 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1989" "Okuma" "LC-30 1SC / 1000" "OSP-5000LG" "Fair" "Yes" "1989 Okuma LC-30 1SC / 1000 OSP-5000LG" "L2150" "-1" "Yes"
6956 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "Okuma" "Crown 762" "OSP-700L" "Good" "Yes" "1999 Okuma Crown 762 OSP-700L" "L2150" "0" "Yes"
8128 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2006" "Okuma" "ES-L10" "OSP-U10L" "Very Good" "Yes" "Swing 21.65"", Swing Over Cross Slide 20.47"", Maximum Turning Diameter 12.20"", Length 19.68"", 3,000 RPM, 15 HP, 12 Sta. Turret, Tailstock, Bar Feed Interface, 10"" 3-Jaw Chuck, Chip Conveyor, Parts Catcher" "2006 Okuma ES-L10 OSP-U10L" "L2150" "-1" "Yes"
7881 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Okuma" "LNC-8" "OSP-5020L" "Good" "Yes" "1994 Okuma LNC-8 OSP-5020L" "L2150" "0" "Yes"
7723 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1991" "Okuma" "LB-15" "OSP-5020L" "Good" "Yes" "1991 Okuma LB-15 OSP-5020L" "L2150" "0" "Yes"
7719 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1991" "Okuma" "LB-15 BB" "OSP-5020L" "Good" "Yes" "1991 Okuma LB-15 BB OSP-5020L" "L2150" "0" "Yes"
8578 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2004" "Okuma" "Captain L-370 BB" "OSP-E100L" "Good" "Yes" "2004 Okuma Captain L-370 BB OSP-E100L" "L2150" "0" "Yes"
8325 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1993" "Okuma and Howa" "ACT-20" "Fanuc 18T" "Very Good" "Yes" "20"" Swing, 13.3"" SOC, 11.81"" Turning Dia., 18"" Turning Length, 4,500 RPM, 2"" Bar Cap. 20 HP, 12 Station Turret, Tailstock, 8"" 3-Jaw Hydraulic Chuck, Chip Conveyor, Parts Catcher, Barfeed Interface" "1993 Okuma and Howa ACT-20 Fanuc 18T" "L2150" "-1" "Yes"
8324 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1996" "Okuma and Howa" "ACT-35L" "Fanuc 18T" "Very Good" "Yes" "19.68""Swing, 17.25""SOC, 13.77"" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125"" Bar Cap. 25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12"" 3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw" "1996 Okuma and Howa ACT-35L Fanuc 18T" "L2150" "-1" "Yes"
7663 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Okuma and Howa" "HL-35M" "Fanuc 18iT" "Very Good" "Yes" "2000 Okuma and Howa HL-35M Fanuc 18iT" "L2150" "0" "Yes"
7748 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Poreba" "PNA 90/6M" "Fanuc OiTC" "New" "Yes" "2008 Poreba PNA 90/6M Fanuc OiTC" "L2150" "0" "Yes"
7749 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Poreba" "PNA 110/6M" "Fanuc OiTC" "New" "Yes" "2008 Poreba PNA 110/6M Fanuc OiTC" "L2150" "0" "Yes"
8377 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2009" "Poreba" "PNA 80/4M" "Fanuc OiTC" "New" "Yes" "2009 Poreba PNA 80/4M Fanuc OiTC" "L2150" "0" "Yes"
8361 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1994" "Ravensburg" "98"" x 98""" "NUM-750" "Very Good" "Yes" "98"" Swing, 77.6"" SOC, 77.6"" Turn Dia., 98"" Centers, 68 RPM, 3"" Bar Cap, 50 HP, 57"" 4-Jaw Manual Chuck, All Hardened and Ground Ways, Renishaw Touchsetter, All Siemens Drives, Powered Tailstock, Pendant Control" "1994 Ravensburg 98"" x 98"" NUM-750" "L2150" "-1" "Yes"
6428 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1989" "Takisawa" "TC-1" "Fanuc OT" "Good" "Yes" "1989 Takisawa TC-1 Fanuc OT" "L2150" "0" "Yes"
8356 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2006" "Takisawa" "EX-106" "Fanuc 21iTB" "Very Good" "Yes" "13.75"" Swing, 11"" SOC, 13.75"" Turning Length, 5,000 RPM, 2.25"" Spindle Bore, 1.63"" Bar Capacity, A2-6 Nose, 10 HP, 12 Station Turret, 8"" 3-Jaw Hydraulic Chuck, Oil Separator, Chip Conveyor, Coolant Through Turret, Hydraulic Tailstock" "2006 Takisawa EX-106 Fanuc 21iTB" "L2150" "-1" "Yes"
5757 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1981" "Takisawa " "TS-15" "Fanuc 6TB" "Good" "Yes" "Swing Over Bed 17.7"", Swing Over Saddle 12"", Maximum Turning Diameter 9.4"", Length 15.75"", 6,300 RPM, 10 HP, 12 Sta. Turret, Hydraulic Tailstock, Foot Switch for Chucking, RS-232 Port, Coolant System" "1981 Takisawa TS-15 Fanuc 6TB" "L2150" "-1" "Yes"
5961 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1990" "Timemaster" "350 CNC" "Fanuc OTA" "Good" "Yes" "1990 Timemaster 350 CNC Fanuc OTA" "L2150" "0" "Yes"
7750 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2008" "Toolmex" "TUR-930 MN/236" "Fanuc 21iT" "New" "Yes" "2008 Toolmex TUR-930 MN/236 Fanuc 21iT" "L2150" "0" "Yes"
7357 "LATHES, CNC, 2-AXIS, UNIVERSAL" "2000" "Tos" "SU-63" "Fagor" "Good" "Yes" "2000 Tos SU-63 Fagor" "l2150" "0" "On Way"
8349 "LATHES, CNC, 2-AXIS, UNIVERSAL" "1999" "VDF" "V800-3000 BB" "Siemens 840D" "Very Good" "Yes" "1999 VDF V800-3000 BB Siemens 840D" "L2150" "0" "Yes"
7135 "LATHES, CNC, 2-AXIS, W- SUB-SPINDLE" "1998" "Mazak" "Super Quick Turn-200S" "Mazatrol T-PLUS" "Good" "Yes" "1998 Mazak Super Quick Turn-200S Mazatrol T-PLUS" "L2125S" "-1" "Yes"
7015 "LATHES, CNC, 2-AXIS, W- SUB-SPINDLE" "2000" "Mazak" "Super Quick Turn-250 S" "Mazatrol Fusion 640MT" "Good" "Yes" "2000 Mazak Super Quick Turn-250 S Mazatrol Fusion 640MT" "L2125S" "0" "Yes"
6721 "LATHES, CNC, 2-AXIS, W- SUB-SPINDLE" "2000" "Mori-Seiki" "SL-250BS / 500" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "2000 Mori-Seiki SL-250BS / 500 Mitsubishi MSC-501 (18iTA)" "L2125S" "0" "Yes"
8474 "LATHES, CNC, 3-AXIS, CHUCKER W-MILLING" "2002" "Haas" "SL-20L" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas SL-20L Haas 32 BIT" "L2125M" "0" "Yes"
8588 "LATHES, CNC, 3-AXIS, CHUCKER W-MILLING" "1996" "Hardinge" "Conquest T-51" "Fanuc 18TB" "Good" "Yes" "1996 Hardinge Conquest T-51 Fanuc 18TB" "L2125M" "-1" "On Way"
8239 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2008" "Amera-Seiki" "T-310 MC" "Fanuc 0iTC" "Like New" "Yes" "2008 Amera-Seiki T-310 MC Fanuc 0iTC" "L2150M" "-1" "Yes"
7896 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1999" "Daewoo" "Puma-250M" "Fanuc 18T" "Good" "Yes" "1999 Daewoo Puma-250M Fanuc 18T" "L2150M" "0" "Yes"
7841 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1998" "Daewoo" "Puma-350 LM" "Fanuc 18T" "Very Good" "Yes" "1998 Daewoo Puma-350 LM Fanuc 18T" "L2150M" "0" "Yes"
8315 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2007" "Doosan" "Puma-2000Y" "Fanuc 18iTB" "Very Good" "Yes" "2007 Doosan Puma-2000Y Fanuc 18iTB" "L2150M" "0" "Yes"
8007 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2007" "Doosan" "Puma-700M" "Fanuc OiTC" "Very Good" "Yes" "2007 Doosan Puma-700M Fanuc OiTC" "L2150M" "0" "Yes"
7159 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1986" "Hardinge" "Conquest 42" "Fanuc OT" "Very Good" "Yes" "21.2"" Swg, 17.5"" Centers, 5,000 RPM, 15 HP, 12 Sta. Turret, C-Axis, Tailstock, Parts Catcher, Chip Conveyor, LNS HydroBar Bar Feed, Approximately Six (6) Live Tool Holders, Twelve (12) Standard Tool Holders" "1986 Hardinge Conquest 42 Fanuc OT" "L2150M" "-1" "Yes"
8540 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1996" "Hardinge" "Conquest T-42" "Fanuc 18T" "Very Good" "Yes" "1996 Hardinge Conquest T-42 Fanuc 18T" "L2150M" "0" "Yes"
7544 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2001" "Mazak" "Integrex 30 Y / 1500" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "2001 Mazak Integrex 30 Y / 1500 Mazatrol Fusion 640 MT" "L2150M" "0" "Yes"
8108 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2006" "Mazak" "Quick Turn-100 M Nexus" "Mazatrol Fusion 640 T" "Very Good" "Yes" "2006 Mazak Quick Turn-100 M Nexus Mazatrol Fusion 640 T" "L2150M" "-1" "Yes"
7947 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1985" "Mazak" "Slant Turn-40N MC" "Mazatrol T-1" "Good" "Yes" "1985 Mazak Slant Turn-40N MC Mazatrol T-1" "L2150M" "0" "Yes"
7992 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1989" "Mazak" "Slant Turn-40 N ATC M/C" "Fanuc 11T" "Good" "Yes" "1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T" "L2150M" "0" "Yes"
8076 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1992" "Mazak" "Super Quick Turn-15M" "Mazatrol T-32-3" "Good" "Yes" "Swing Over Bed 20.91"", Swing Over Saddle 15.74"", Maximum Turning Diameter 11.75"", Length 20"", 5,000 RPM, 10 HP, 12 Sta. Turret - 6 Live, Tool Life Management, 10"" 3-Jaw Chucks, Tool Breakage Detection, Three (3) Live Tool Holders, Chip Conveyor" "1992 Mazak Super Quick Turn-15M Mazatrol T-32-3" "L2150M" "-1" "Yes"
6234 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1995" "Mazak" "Integrex 30 / 1000" "Mazatrol T-PLUS" "Good" "Yes" "Swing 20"", Swing Over Cross Slide 15.75"", Maximum Turning Diameter 20"", Length 40"", 3,500 RPM, 35 HP, 20 Sta. ATC, 40 Taper, 10"" 3-Jaw Chuck, Chip Conveyor, Coolant Through Milling Head, User Macros, Fully Programmable Tailstock Body and Quill, Automatic Tool Eye, EIA / ISO Input Function" "1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS" "L2150M" "-1" "Yes"
8510 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1997" "Mazak" "Super Quick Turn-15M" "Mazatrol T-PLUS" "Good" "Yes" "1997 Mazak Super Quick Turn-15M Mazatrol T-PLUS" "L2150M" "0" "Yes"
8263 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1996" "Mori-Seiki" "MT-25B" "Fanuc MF-T6" "Very Good" "Yes" "1996 Mori-Seiki MT-25B Fanuc MF-T6" "L2150M" "0" "Yes"
8569 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2008" "Mori-Seiki" "NL-2500 MC / 700" "Mori-Seiki MSX-850 MB" "Like New" "Yes" "2008 Mori-Seiki NL-2500 MC / 700 Mori-Seiki MSX-850 MB" "L2150M" "0" "Yes"
8552 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1998" "Mori-Seiki" "SL-250 BMC" "Mitsubishi MSC-501 (18iTA)" "Good" "Yes" "1998 Mori-Seiki SL-250 BMC Mitsubishi MSC-501 (18iTA)" "L2150M" "0" "Yes"
8409 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2003" "Mori-Seiki" "SL-303 AMC / 700" "Fanuc 18iT" "Very Good" "Yes" "2003 Mori-Seiki SL-303 AMC / 700 Fanuc 18iT" "L2150M" "0" "Yes"
7465 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2000" "Mori-Seiki" "SL-250 BMC / 1000" "Mitsubishi MSC-501 (18iTA)" "Good" "Yes" "2000 Mori-Seiki SL-250 BMC / 1000 Mitsubishi MSC-501 (18iTA)" "L2150M" "0" "Yes"
8317 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "2001" "Okuma" "Captain L-370 M" "OSP-E100L" "Very Good" "Yes" "2001 Okuma Captain L-370 M OSP-E100L" "L2150M" "0" "Yes"
8458 "LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING" "1999" "Tacchi" "71"" x 551""" "Fanuc 16iT" "Very Good" "Yes" "1999 Tacchi 71"" x 551"" Fanuc 16iT" "L2150M" "0" "Yes"
8506 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Daewoo" "Puma-240 MSC" "Fanuc 18iT" "Very Good" "Yes" "21.65"" Swing, 15.4"" SOC, 11.4"" Turn Dia., 32.3"" Turn Length, 3,500 RPM, 2.56 Bar Cap., 25 HP, 6,000 RPM, Sub-Spindle, 8"" 3-Jaw Hydraulic Chuck On Main, 6"" 3-Jaw Hydraulic Chuck On Sub, Parts Catcher, Parts Conveyor, Ballscrew Driven Programmable Sub Spindle, Milling Spindle Synchronous Tapping, Chip Conveyor, Iemca Master 880MP Barfeed" "2002 Daewoo Puma-240 MSC Fanuc 18iT" "L2125MS" "-1" "On Way"
8615 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Daewoo" "Puma-2500 SY" "Fanuc 18iTB" "Excellent" "Yes" "2006 Daewoo Puma-2500 SY Fanuc 18iTB" "L2125MS" "0" "Yes"
6309 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1999" "Daewoo" "Puma-200 MSC" "Fanuc 18T" "Good" "Yes" "1999 Daewoo Puma-200 MSC Fanuc 18T" "L2125MS" "0" "Yes"
7649 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2005" "Daewoo" "Puma-2000 SY" "Fanuc 18iTB" "Very Good" "Yes" "2005 Daewoo Puma-2000 SY Fanuc 18iTB" "L2125MS" "0" "Yes"
8460 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2005" "Daewoo" "Puma-240 MSC" "Fanuc 18iT" "Very Good" "Yes" "2005 Daewoo Puma-240 MSC Fanuc 18iT" "L2125MS" "0" "Yes"
7802 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1996" "Hardinge" "Conquest T-42" "Fanuc 18T" "Good" "Yes" "1996 Hardinge Conquest T-42 Fanuc 18T" "L2125MS" "0" "Yes"
7795 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Hitachi-Seiki" "Super Hi-Cell CH-250" "Seicos 16T" "Good" "Yes" "Swing 19.68"", Swing Over Cross Slide 19.68"", Maximum Turning Diameter 19.68"", Length 28.3"", 4,000 RPM, 25 HP, 20 Sta. ATC, 10"" 3-Jaw Chuck & 8""-3-Jaw Chucks, Tool Presetter, Various Tool Holders" "2001 Hitachi-Seiki Super Hi-Cell CH-250 Seicos 16T" "L2125MS" "0" "Yes"
7013 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1995" "Mazak" "Super Quick Turn-28MS" "Mazatrol T-PLUS" "Good" "Yes" "1995 Mazak Super Quick Turn-28MS Mazatrol T-PLUS" "L2125MS" "0" "Yes"
7857 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Mazak" "Integrex 200 III SY" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "2006 Mazak Integrex 200 III SY Mazatrol Fusion 640 MT" "L2125MS" "0" "Yes"
7301 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1992" "Mazak" "Super Quick Turn-15MS" "Mazatrol T-32-3" "Good" "Yes" "1992 Mazak Super Quick Turn-15MS Mazatrol T-32-3" "L2125MS" "0" "Yes"
8505 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Mazak" "Super Quick Turn-18MSY" "Mazatrol T-PLUS" "Very Good" "Yes" "1998 Mazak Super Quick Turn-18MSY Mazatrol T-PLUS" "L2125MS" "0" "Yes"
8509 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Mazak" "Super Quick Turn-200MS" "Mazatrol T-PLUS" "Good" "Yes" "1998 Mazak Super Quick Turn-200MS Mazatrol T-PLUS" "L2125MS" "0" "Yes"
7128 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2007" "Mazak" "Integrex 300 IV S" "Mazatrol Matrix" "Like New" "Yes" "2007 Mazak Integrex 300 IV S Mazatrol Matrix" "L2125MS" "-1" "Yes"
6582 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2000" "Mazak" "Integrex 400 SY" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "2000 Mazak Integrex 400 SY Mazatrol Fusion 640 MT" "L2125MS" "0" "Yes"
7784 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2003" "Mazak" "Super Quick Turn-100 MSY" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "2003 Mazak Super Quick Turn-100 MSY Mazatrol Fusion 640 MT" "L2125MS" "0" "Yes"
8508 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2000" "Mazak" "Super Quick Turn-250MSY" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "Swing 20.90"", Max. Turning 11.75"", 4,000 RPM, 25 HP, 2.5"" Bar Cap., 10"" 3-Jaw Hydraulic Chuck Main Spindle, Automatic Tool Eye, Chip Conveyor, Six (6) Live Tool Holders, High Power Coolant System (50 PSI), Two (2) Parts Catchers, LNS Servo Quick Load Bar Feed, Synchronous Tapping" "2000 Mazak Super Quick Turn-250MSY Mazatrol Fusion 640 MT" "L2125MS" "0" "Yes"
7300 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1993" "Mazak" "Super Quick Turn-15MS" "Mazatrol T-32-3" "Very Good" "Yes" "1993 Mazak Super Quick Turn-15MS Mazatrol T-32-3" "L2125MS" "0" "Yes"
7088 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Mazak" "Super Quick Turn-30 MS" "Mazatrol T-PLUS" "Good" "Yes" "1998 Mazak Super Quick Turn-30 MS Mazatrol T-PLUS" "L2125MS" "0" "Yes"
6037 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1996" "Mazak" "Super Quick Turn-15MS" "Mazatrol T-PLUS" "Good" "Yes" "1996 Mazak Super Quick Turn-15MS Mazatrol T-PLUS" "L2125MS" "0" "Yes"
5994 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mazak" "Super Quick Turn-28MS" "Mazatrol T-PLUS" "Good" "Yes" "1997 Mazak Super Quick Turn-28MS Mazatrol T-PLUS" "L2125MS" "0" "Yes"
7498 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2003" "Mazak" "Integrex 200 II SY" "Mazatrol Fusion 640 MT" "Good" "Yes" "2003 Mazak Integrex 200 II SY Mazatrol Fusion 640 MT" "L2125MS" "0" "Yes"
7053 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mazak" "Super Quick Turn-15MSY" "Mazatrol T-PLUS" "Very Good" "Yes" "1997 Mazak Super Quick Turn-15MSY Mazatrol T-PLUS" "L2125MS" "-1" "Yes"
7326 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2004" "Miyano" "BND-51SY" "Fanuc 18iTB" "Very Good" "Yes" "2004 Miyano BND-51SY Fanuc 18iTB" "L2125MS" "0" "Yes"
7303 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Miyano" "BNE-46S" "Fanuc 18T" "Very Good" "Yes" "1998 Miyano BNE-46S Fanuc 18T" "L2125MS" "0" "Yes"
7927 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1996" "Miyano" "BND-34S3L" "Fanuc 18T" "Good" "Yes" "1996 Miyano BND-34S3L Fanuc 18T" "L2125MS" "0" "Yes"
8357 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Miyano" "BND-42 S5" "Fanuc 21T" "Very Good" "Yes" "2001 Miyano BND-42 S5 Fanuc 21T" "L2125MS" "0" "Yes"
7302 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Miyano" "BNE-51S" "Fanuc 18TB" "Good" "Yes" "Swing 20"", Maximum Turning Diameter 6"", Length 3.54"", 4,000 RPM, 15 HP, 12 Sta. Upper 10 Sta. Lower Turret, Sub Spindle, Live Tools, LNS HydorBar Bar Feed" "1998 Miyano BNE-51S Fanuc 18TB" "L2125MS" "0" "Yes"
7538 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Mori-Seiki" "SL-204 SMC" "Mitsubishi MSG-805" "Very Good" "Yes" "2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805" "L2125MS" "0" "No"
7534 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Mori-Seiki" "SL-2500 MSY" "Mori-Seiki MSG-805" "Good" "Yes" "2002 Mori-Seiki SL-2500 MSY Mori-Seiki MSG-805" "L2125MS" "0" "Yes"
7313 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mori-Seiki" "SL-200 SMC" "Mitsubishi MSC-518L" "Very Good" "Yes" "1997 Mori-Seiki SL-200 SMC Mitsubishi MSC-518L" "L2125MS" "0" "Yes"
6585 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1998" "Mori-Seiki" "SL-200 SMC" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "1998 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA)" "L2125MS" "0" "Yes"
8343 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Mori-Seiki" "NL-2500 SMC / 700" "Mori-Seiki MSX-850 MB" "Very Good" "Yes" "2006 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB" "L2125MS" "0" "Yes"
6893 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mori-Seiki" "SL-150 SMC" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "1997 Mori-Seiki SL-150 SMC Mitsubishi MSC-501 (18iTA)" "L2125MS" "0" "Yes"
6917 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Mori-Seiki" "SL-153 SMY" "Fanuc 18i" "Very Good" "Yes" "26.7"" Swing, 201"" OCS, 17.5"" Turn Dia., 5,000 RPM Main, 1.5"" Bar Cap Main, 15 HP 4,000 RPM Sub, 1.2"" Bar Cap. Sub, 4,000 RPM Sub, 12 Sta. Turret, Nine (9) Live Milling Holders, CNC Enhancements Bar Feed, Latham Hi-Pressure Pump (1,000 PSI), Parts Catcher, Tool Presetter, Chip Conveyor, Only 200 Run Hours" "2001 Mori-Seiki SL-153 SMY Fanuc 18i" "L2125MS" "-1" "Yes"
6880 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mori-Seiki" "SL-150 SMC" "Mitsubishi MSC-518L" "Very Good" "Yes" "1997 Mori-Seiki SL-150 SMC Mitsubishi MSC-518L" "L2125MS" "0" "Yes"
6879 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1999" "Mori-Seiki" "SL-200 SMC" "Mitsubishi MSC-501 (18iTA)" "Good" "Yes" "1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA)" "L2125MS" "0" "Yes"
7644 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2005" "Mori-Seiki" "NL-1500 / 500" "Mori-Seiki MSX-850" "Very Good" "Yes" "2005 Mori-Seiki NL-1500 / 500 Mori-Seiki MSX-850" "L2125MS" "0" "Yes"
6789 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Mori-Seiki" "MT-2000S" "Fanuc 18iT" "Very Good" "Yes" "2002 Mori-Seiki MT-2000S Fanuc 18iT" "L2125MS" "0" "Yes"
6661 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Mori-Seiki" "SL-154 SY" "Mitsubishi MSG-805" "Very Good" "Yes" "2001 Mori-Seiki SL-154 SY Mitsubishi MSG-805" "L2125MS" "0" "Yes"
8268 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Mori-Seiki" "SL-154 SMC" "Mori-Seiki MSG-805" "Good" "Yes" "Swing / Swing Over Cross Slide - 26.8"" / 20.1"", Maximum Turning Diameter / Length - 11.8"" / 19.2"", 6,000 RPM Main & Sub, 15 HP, 1.625"" Bar Capacity, Live Tooling, SMW Bar Feed, Sub-Spindle Parts Ejector, 300 PSI Coolant Pump With Filtration System, Parts Catcher, Chip Conveyor" "2002 Mori-Seiki SL-154 SMC Mori-Seiki MSG-805" "L2125MS" "0" "Yes"
6290 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Mori-Seiki" "Super Hi-Cell CH-250" "Seicos 16T" "Very Good" "Yes" "Swing 19.7"", Swing Over Cross Slide 19.7"", Maximum Turning Diameter 19.7"", Length 28.3"", 4,000 RPM, 25 HP, 20 Sta. ATC, 10"" 3-Jaw Chuck & 8""-2-Jaw Chucks, Chip Conveyor, Parts Catcher, LNS Quick Load Servo Magazine Barfeeder, 2001 Manufacture Date - Intalled in 2004" "2001 Mori-Seiki Super Hi-Cell CH-250 Seicos 16T" "L2125MS" "-1" "Yes"
7847 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Mori-Seiki" "NL-2500 / 700" "Mori-Seiki MSX-850 III" "Like New" "Yes" "2006 Mori-Seiki NL-2500 / 700 Mori-Seiki MSX-850 III" "L2125MS" "0" "Yes"
8529 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Mori-Seiki" "NL-2500 SMC / 700" "Mori-Seiki MSX-850 MB" "Very Good" "Yes" "2006 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB" "L2125MS" "0" "Yes"
6669 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2005" "Nakamura-Tome" "Super NTY-3" "Fanuc 31i-TA" "Very Good" "Yes" "2005 Nakamura-Tome Super NTY-3 Fanuc 31i-TA" "L2125MS" "0" "Yes"
8587 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "2006" "Okuma" "Captain L-370 MW BB" "OSP-E100L" "Excellent" "Yes" "Swing Over Bed 20.8"", Swing Over Saddle 16.54"", Maximum Turning Diameter 14.56"", Length 20"", 3,800 RPM, 30 HP, 12 Sta. Turret, Tailstock, Tool Presetter, 10"" 3-Jaw Chuck, Chip Conveyor, One Touch IGF" "2006 Okuma Captain L-370 MW BB OSP-E100L" "L2125MS" "0" "Yes"
6671 "LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE" "1991" "Takisawa" "TM-20" "Fanuc OT" "Good" "Yes" "19.6"" Swing, 14.57"" OCS, 9.2"" Max Mach., 27.79"" BS, 4,000 RPM, 40 HP, 12 Sta. Turret, 2"" Bar Cap., Sub-Spindle, 10"" 3-Jaw Chuck on Main, 5.5"" 3-Jaw on Sub Spindle, Chip Conveyor, Parts Catcher, Bar Feed Interface, Two (2) Radial and Two (2) Axial Live Holders, Large Selection of Standard Tool Holders, New X-Axis Turcite, Ballscrew and Nut" "1991 Takisawa TM-20 Fanuc OT" "L2125MS" "-1" "Yes"
8430 "LATHES, CNC, 4-AXIS, CHUCKER" "1997" "Kitako" "MT4-200" "Fanuc 16TT" "Very Good" "Yes" "Maximum Turning Diameter 7.8"", Maximum Turning Length 3.9"", 4,000 RPm, 20 HP, Two 8 Station Turrets, Four (4) 10"" 3-Jaw Chucks, Air Blow, Chip Conveyor, Large Selection of Chuck Jaws, High Pressure Coolant Pump (200 psi)" "1997 Kitako MT4-200 Fanuc 16TT" "L21254" "-1" "Yes"
8550 "LATHES, CNC, 4-AXIS, CHUCKER" "2006" "Kitako" "MT4-200" "Fanuc 18iTB" "Very Good" "Yes" "2006 Kitako MT4-200 Fanuc 18iTB" "L21254" "0" "Yes"
6168 "LATHES, CNC, 4-AXIS, CHUCKER" "1988" "Miyano" "BNC-20T" "Fanuc OT" "Good" "Yes" "6"" Swing, 6"" Turning Diameter, 6 7/8"" Turning Length, 6,500 RPM, 5 HP, Two (2) Six (6) Station Turrets, Miyano 12' Gravity Barfeed, Chip Conveyor, Large Selection of Collets, Parts Catcher" "1988 Miyano BNC-20T Fanuc OT" "L21254" "-1" "Yes"
7543 "LATHES, CNC, 4-AXIS, CHUCKER" "1995" "Mori-Seiki" "ZL-45W" "Good" "Yes" "1995 Mori-Seiki ZL-45W " "L21254" "0" "Yes"
7245 "LATHES, CNC, 4-AXIS, CHUCKER" "1995" "Murata" "MW-12" "Fanuc 16TT" "Good" "Yes" "11.6"" Swing, 13.385 Distance Between Spindle, 6,000 RPM, 14 HP,8 Sta. Turrets, Two 6"" 2-Jaw Hydraulic Chucks, Chip Conveyor, Two Multi-Position Indexing Gantry Loader With Turn Around Stations, Right Hand or Left Discharge Available, Machine Sat Idle For Eight (8) Years - Recently Gone Through" "1995 Murata MW-12 Fanuc 16TT" "L21254" "-1" "Yes"
7137 "LATHES, CNC, 4-AXIS, CHUCKER" "1999" "Okuma" "LFS-15-2SP" "OSP-U100L" "Good" "Yes" "Twin Spindle Chucker, Swing Over Bed 20"", Over Saddle 19.68"", 4,500 RPM, 15 HP, 12 Sta. Turrets, 8"" 3-Jaw Chucks Both Spindles, Two (2) Chip Conveyors, 10 Station & 20 Station Circular Stocker, Coolant Through Spindle, Chuck Air Blast" "1999 Okuma LFS-15-2SP OSP-U100L" "L21254" "-1" "Yes"
7136 "LATHES, CNC, 4-AXIS, CHUCKER" "1999" "Okuma" "LCC-15 2SC" "OSP-7000L" "Good" "Yes" "1999 Okuma LCC-15 2SC OSP-7000L" "L21254" "-1" "Yes"
6751 "LATHES, CNC, 4-AXIS, CHUCKER" "1978" "Warner and Swasey" "2-SC-15" "Allen Bradley 7360" "Good" "No" "17 3/8"" Swing, 1,178 RPM, 4.5"" Spindle Bore, 50 HP, Twin Turret, 15"" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader" "1978 Warner and Swasey 2-SC-15 Allen Bradley 7360" "L21254" "-1" "On Way"
6819 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1995" "Mori-Seiki" "ZL-35B / 750" "Fanuc MF-D6" "Good" "Yes" "1995 Mori-Seiki ZL-35B / 750 Fanuc MF-D6" "L21504" "0" "Yes"
7673 "LATHES, CNC, 4-AXIS, UNIVERSAL" "2000" "Mori-Seiki" "ZL-250 / 600" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "2000 Mori-Seiki ZL-250 / 600 Mitsubishi MSC-501 (18iTA)" "L21504" "0" "Yes"
8590 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1985" "Okuma" "LC-40 2ST / 1500" "OSP-5000LG" "Good" "Yes" "1985 Okuma LC-40 2ST / 1500 OSP-5000LG" "L21504" "0" "Yes"
8396 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1982" "Okuma" "LC-40 2SC / 250" "OSP-3000L" "Good" "Yes" "1982 Okuma LC-40 2SC / 250 OSP-3000L" "L21504" "0" "Yes"
8532 "LATHES, CNC, 4-AXIS, UNIVERSAL" "2007" "Okuma" "LU-300 / 600 Simulturn" "OSP-P200L" "Very Good" "Yes" "2007 Okuma LU-300 / 600 Simulturn OSP-P200L" "L21504" "0" "Yes"
6481 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1999" "Okuma" "LC-50 2SC" "OSP-7000L" "Good" "Yes" "1999 Okuma LC-50 2SC OSP-7000L" "L21504" "0" "Yes"
8255 "LATHES, CNC, 4-AXIS, UNIVERSAL" "2000" "Okuma" "LU-15 2SC" "OSP-U100L" "Very Good" "Yes" "Swing 22"", Swing Over Cross Slide 17.7"", Maximum Turning Diameter 14.17"", Length 23.62"", 4,500 RPM, 30 HP, 12 / 8 Sta. Turrets, 8"" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5"" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock" "2000 Okuma LU-15 2SC OSP-U100L" "L21504" "-1" "Yes"
8256 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1997" "Okuma" "LU-25 2SC" "OSP-7000L" "Very Good" "Yes" "Swing 22"", Swing Over Cross Slide 16.54"", Maximum Turning Diameter 16.80"", Length 25.59"", 3,500 RPM, 40 HP, 12 / 10 Sta. Turrets, 10"" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5"" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock" "1997 Okuma LU-25 2SC OSP-7000L" "L21504" "-1" "On Way"
7065 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1993" "Okuma" "LR-25 2SC/850" "OSP-5020L" "Good" "Yes" "1993 Okuma LR-25 2SC/850 OSP-5020L" "L21504" "0" "Yes"
8316 "LATHES, CNC, 4-AXIS, UNIVERSAL" "2007" "Okuma" "LU-300 BB" "OSP-P200L" "Very Good" "Yes" "2007 Okuma LU-300 BB OSP-P200L" "L21504" "0" "Yes"
8291 "LATHES, CNC, 4-AXIS, UNIVERSAL" "1982" "Okuma" "LC-40 2ST / 1500" "OSP-3000L" "Good" "Yes" "1982 Okuma LC-40 2ST / 1500 OSP-3000L" "L21504" "0" "Yes"
8561 "LATHES, CNC, 4-AXIS, W-MILLING" "1988" "Okuma" "LC-40M Simulturn" "OSP-5000LG" "Good" "Yes" "1988 Okuma LC-40M Simulturn OSP-5000LG" "L21254M" "0" "Yes"
8297 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2004" "Daewoo" "Puma-TT-2500 SY" "Fanuc 18iTB" "Very Good" "Yes" "2004 Daewoo Puma-TT-2500 SY Fanuc 18iTB" "L21254MS" "0" "Yes"
8266 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Doosan" "Z340SM" "Fanuc 18iTB" "Like New" "Yes" "2002 Doosan Z340SM Fanuc 18iTB" "L21254MS" "-1" "Yes"
8521 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Graziano" "Twin 70Y" "Fanuc 18iT" "Very Good" "Yes" "2001 Graziano Twin 70Y Fanuc 18iT" "L21254MS" "0" "Yes"
8068 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2001" "Mori-Seiki" "ZL-200 SMC" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "26.8"" Swing, 20.1"" SOC, 16.7"" Turning Length, 4,000 RPM, 20 HP, Sub-Spindle, Two Turrets, Live Tooling, Full C-Axis for Main and Sub-Spindle, Overhead in Machine Auto Parts Catcher, Chip Conveyor" "2001 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA)" "L21254MS" "-1" "On Way"
8422 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2003" "Okuma" "LT-300 BB MY" "OSP-E100L" "Very Good" "Yes" "2003 Okuma LT-300 BB MY OSP-E100L" "L21254MS" "0" "Yes"
7489 "LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE" "2003" "Takamaz" "XY-1000" "Fanuc 18iTB" "Very Good" "Yes" "12.2"" Swing, 10.1"" OCS, 8.25"" Max. Dia., 16"" Max. Length, 5,000 RPM Main & Sub Spindle, 1.625"" Bar Cap., Two (2) 12 Station Turrets, Y-Axis, Full C-Axis, Upgraded Higher Horsepower, Chip Conveyor, Factory Parts Discharge Conveyor, 12' Hydraulic Bar Feed, Automatic Parts Catcher, Tool Presetter, 6"" Collet Chuck Main & 6"" 3-Jaw Hydraulic Chuck Sub, Live Tool Holder" "2003 Takamaz XY-1000 Fanuc 18iTB" "L21254MS" "-1" "Yes"
8522 "LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE" "2004" "Hardinge" "Quest 8/51" "Fanuc 16iT" "Very Good" "Yes" "2004 Hardinge Quest 8/51 Fanuc 16iT" "L21256MS" "0" "Yes"
7485 "LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE" "2002" "Hardinge" "Quest 10/65-LT-C-Y" "Fanuc 18iT" "Good" "Yes" "2002 Hardinge Quest 10/65-LT-C-Y Fanuc 18iT" "L21256MS" "0" "Yes"
6783 "LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mori-Seiki" "DL-150 MY" "Mitsubishi MSC-501 (18iTA)" "Very Good" "Yes" "1997 Mori-Seiki DL-150 MY Mitsubishi MSC-501 (18iTA)" "L21256MS" "0" "Yes"
7724 "LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Mori-Seiki" "DL-150 MY" "Mitsubishi MSC-518L (18iTT)" "Good" "Yes" "1997 Mori-Seiki DL-150 MY Mitsubishi MSC-518L (18iTT)" "L21256MS" "0" "Yes"
7885 "LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE" "1997" "Nakamura-Tome" "TW-20MMY" "Fanuc 18T" "Good" "Yes" "1997 Nakamura-Tome TW-20MMY Fanuc 18T" "L21256MS" "0" "Yes"
8436 "LATHES, CNC, GANG STYLE" "1996" "Amera-Seiki" "GT-32" "Fanuc OTC" "Good" "Yes" "14.3"" Swing, 10.8"" OCS, 4"" Turning Dia., 11.8"" Turn Length, 1.57"" Spindle Bore, 10 HP, 12"" x 20.8"" Gang Slide" "1996 Amera-Seiki GT-32 Fanuc OTC" "L2125G" "-1" "Yes"
6048 "LATHES, CNC, GANG STYLE" "1996" "Hardinge" "Conquest CS-GT" "Fanuc 18T" "Very Good" "Yes" "Swing - 11.76, 11.968"" x 11.062"" Travels, 6,000 RPM, 5 HP, Live Tooling, Air Blast System, Parts Removal System, Filter Mist System, Transformer, 12' Vanco Single Tube Bar Feed, Cross End Mill and Drill Attachment, Very Low Hours" "1996 Hardinge Conquest CS-GT Fanuc 18T" "L2125G" "-1" "Yes"
8589 "LATHES, CNC, GANG STYLE" "1995" "Hardinge" "Conquest GT-27 SP" "Fanuc 18T" "Good" "Yes" "1995 Hardinge Conquest GT-27 SP Fanuc 18T" "L2125G" "-1" "On Way"
7267 "LATHES, CNC, GANG STYLE" "1998" "Mazak" "Quick Turn 6G" "Mazatrol EIA Dash" "Very Good" "Yes" "1998 Mazak Quick Turn 6G Mazatrol EIA Dash" "L2125G" "0" "Yes"
7297 "LATHES, CNC, GANG STYLE" "1997" "Mazak" "Quick Turn 6G" "Good" "Yes" "1997 Mazak Quick Turn 6G " "l2125g" "-1" "Yes"
5981 "LATHES, CNC, OPPOSING SPINDLES" "1990" "Mazak" "Multiplex 420" "Mazatrol T-32-4" "Good" "No" "Two Spindles - 15.35"" Swing, 45.6"" Distance Between Spindles, 4,000 RPM, 25 HP, 12 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Adjustable Hydraulic Chucks Pressure, Mazak Flex GL-100 Robot" "1990 Mazak Multiplex 420 Mazatrol T-32-4" "L2125T" "-1" "Yes"
6329 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "1998" "Mazak" "Multiplex 6200 Y" "Mazatrol Fusion 640 MT" "Good" "Yes" "1998 Mazak Multiplex 6200 Y Mazatrol Fusion 640 MT" "L2125TM" "0" "Yes"
7414 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "1993" "Mazak" "Multiplex 610" "Mazatrol T-32-6" "Good" "Yes" "1993 Mazak Multiplex 610 Mazatrol T-32-6" "L2125TM" "0" "Yes"
7348 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "1993" "Mazak" "Multiplex 610" "Mazatrol T-32-6" "Good" "Yes" "1993 Mazak Multiplex 610 Mazatrol T-32-6" "L2125TM" "0" "Yes"
6923 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "2000" "Mori-Seiki" "DL-151 MCY" "Mitsubishi MSC-501" "Very Good" "Yes" "2000 Mori-Seiki DL-151 MCY Mitsubishi MSC-501" "L2125TM" "0" "Yes"
7720 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "2000" "Mori-Seiki" "DL-151 MCY" "Fanuc 18TT" "Very Good" "Yes" "2000 Mori-Seiki DL-151 MCY Fanuc 18TT" "L2125TM" "0" "Yes"
7877 "LATHES, CNC, OPPOSING SPINDLES W-MILLING" "1999" "Mori-Seiki" "DL-151 MCY" "Fanuc 18TA" "Good" "Yes" "16.5"" Swing, 7.8"" SOC, 5,000 RPM, 2.2"" Bore, 15 HP, 2-12 Sta. Turret, Two (2) 6"" 3-Jaw Chucks and Two (2) 3J Collet Chucks, Chip Conveyor, Bar Feed Interface, Parts Conveyor, Two (2) Tool Pre-Setters, Auto Parts Catcher With Ejector, Full C-Axis, Y-Axis, Live Tooling" "1999 Mori-Seiki DL-151 MCY Fanuc 18TA" "L2125TM" "-1" "Yes"
7590 "LATHES, ENGINE" "American" "44"" x 276""" "Good" "Yes" " American 44"" x 276"" " "L3000" "0" "Yes"
8549 "LATHES, ENGINE" "1953" "American" "46"" x 72""" "Good" "Yes" "1953 American 46"" x 72"" " "L3000" "0" "Yes"
7555 "LATHES, ENGINE" "1975" "American" "4025" "Good" "Yes" "1975 American 4025 " "L3000" "0" "Yes"
7496 "LATHES, ENGINE" "1989" "Binns and Berry" "Series 850" "Good" "Yes" "1989 Binns and Berry Series 850 " "L3000" "0" "Yes"
7858 "LATHES, ENGINE" "1984" "Binns and Berry" "L-1000 Trident" "Good" "Yes" "40"" Swing, 236"" Centers, 1,250 RPM, 30 HP, Threading Inch / Metric, 35.4"" 4-Jaw Chuck, One (1) Steady Rest, Two (2) Follow Rest, Square Tool Post" "1984 Binns and Berry L-1000 Trident " "L3000" "0" "Yes"
6844 "LATHES, ENGINE" "1982" "Cincinnati" "LRT" "Very Good" "Yes" "1982 Cincinnati LRT " "L3000" "0" "Yes"
7383 "LATHES, ENGINE" "1996" "Clausing-Colchester" "Mastiff GH" "Very Good" "Yes" "1996 Clausing-Colchester Mastiff GH " "L3000" "0" "Yes"
7430 "LATHES, ENGINE" "1952" "Clovis" "43"" x 240""" "Good" "Yes" "1952 Clovis 43"" x 240"" " "L3000" "0" "Yes"
7353 "LATHES, ENGINE" "1971" "Colchester" "Mastiff 1400" "Very Good" "Yes" "1971 Colchester Mastiff 1400 " "L3000" "0" "Yes"
7980 "LATHES, ENGINE" "Craven" "112"" x 312""" "Good" "Yes" " Craven 112"" x 312"" " "L3000" "0" "Yes"
6837 "LATHES, ENGINE" "1979" "Harrison" "M400" "Good" "Yes" "1979 Harrison M400 " "L3000" "0" "Yes"
7494 "LATHES, ENGINE" "1954" "Hercules" "32"" x 16'" "Good" "Yes" "32"" Swing, 20 SOC, Swing in Gap 46"", 192"" Centers, 1,250 RPM, 25 HP, Threading, 23.5"" 4-Jaw Chuck, Soft Steady Rest, Wheeled Steady Rest, Follow Rest" "1954 Hercules 32"" x 16' " "L3000" "-1" "Yes"
8333 "LATHES, ENGINE" "2001" "Kingston" "HK-3000" "Very Good" "Yes" "2001 Kingston HK-3000 " "L3000" "0" "Yes"
8482 "LATHES, ENGINE" "1978" "Kingston" "HR-5000" "Good" "Yes" "1978 Kingston HR-5000 " "L3000" "0" "Yes"
7996 "LATHES, ENGINE" "1978" "Kingston" "HLC-1860" "Very Good" "Yes" "1978 Kingston HLC-1860 " "L3000" "-1" "Yes"
8503 "LATHES, ENGINE" "Kingston" "HR-5000" "Very Good" "Yes" " Kingston HR-5000 " "L3000" "0" "Yes"
6838 "LATHES, ENGINE" "1984" "Kingston" "HL-2500 Model D" "Very Good" "Yes" "1984 Kingston HL-2500 Model D " "L3000" "-1" "Yes"
7429 "LATHES, ENGINE" "1945" "Lang" "36"" x 23'" "Good" "Yes" "1945 Lang 36"" x 23' " "L3000" "0" "Yes"
8511 "LATHES, ENGINE" "2004" "Lansing" "32"" x 120""" "Like New" "Yes" "2004 Lansing 32"" x 120"" " "L3000" "0" "Yes"
7439 "LATHES, ENGINE" "2008" "Lansing" "32"" x 80""" "New" "Yes" "2008 Lansing 32"" x 80"" " "L3000" "0" "Yes"
8259 "LATHES, ENGINE" "Lansing" "48"" x 120""" "Good" "Yes" " Lansing 48"" x 120"" " "L3000" "0" "Yes"
6422 "LATHES, ENGINE" "2000" "Lansing" "52"" x 120""" "Very Good" "Yes" "2000 Lansing 52"" x 120"" " "L3000" "0" "Yes"
8495 "LATHES, ENGINE" "1968" "Leblond" "2516" "Very Good" "Yes" "1968 Leblond 2516 " "L3000" "0" "Yes"
7685 "LATHES, ENGINE" "1967" "Leblond" "4025" "Very Good" "Yes" "1967 Leblond 4025 " "L3000" "0" "Yes"
8470 "LATHES, ENGINE" "1982" "Leblond" "26"" x 72""" "Very Good" "Yes" "1982 Leblond 26"" x 72"" " "L3000" "0" "Yes"
8497 "LATHES, ENGINE" "1966" "Leblond" "2516" "Very Good" "Yes" "1966 Leblond 2516 " "L3000" "0" "Yes"
8504 "LATHES, ENGINE" "1963" "Leblond" "25" "God" "Yes" "1963 Leblond 25 " "L3000" "0" "Yes"
7422 "LATHES, ENGINE" "1973" "Leblond" "Regal 24" "Good" "Yes" "1973 Leblond Regal 24 " "L3000" "0" "Yes"
7031 "LATHES, ENGINE" "1967" "Leblond" "3320NF Servo Shift" "Reconditioned" "Yes" "1967 Leblond 3320NF Servo Shift " "L3000" "0" "On Way"
6996 "LATHES, ENGINE" "1954" "Leblond" "Model 40" "Good" "Yes" "1954 Leblond Model 40 " "L3000" "0" "Yes"
6845 "LATHES, ENGINE" "1968" "Leblond" "Regal Servo-Shift" "Very Good" "Yes" "1968 Leblond Regal Servo-Shift " "L3000" "0" "Yes"
6842 "LATHES, ENGINE" "1965" "Leblond" "Regal" "Very Good" "Yes" "1965 Leblond Regal " "L3000" "-1" "Yes"
7182 "LATHES, ENGINE" "1956" "Leblond" "Regal Servo-Shift" "Good" "Yes" "Swing Over Bed 18"", Swing Over Saddle 11 1/4"", Maximum Turning Length 78"", 1,000 RPM, 10 HP, Tailstock, 15"" 4-Jaw Chuck, Inch / Metric Threading, Taper Attachment, Servo Shift Controls, Extra 4-Jaw Chuck" "1956 Leblond Regal Servo-Shift " "L3000" "-1" "Yes"
7742 "LATHES, ENGINE" "1965" "Lodge and Shipley" "3220 Magna Turn" "Good" "Yes" "1965 Lodge and Shipley 3220 Magna Turn " "L3000" "0" "No"
7951 "LATHES, ENGINE" "1951" "Lodge and Shipley" "24"" x 120""" "Fair" "Yes" "1951 Lodge and Shipley 24"" x 120"" " "L3000" "0" "Yes"
6339 "LATHES, ENGINE" "Mazak" "Good" "Yess" " Mazak " "L3000" "-1" "Yes"
7193 "LATHES, ENGINE" "1974" "Mc Dougall" "VDF E3" "Good" "Yes" "1974 Mc Dougall VDF E3 " "l3000" "-1" "Yes"
8507 "LATHES, ENGINE" "Meuser" "32"" x 120""" "Good" "Yes" " Meuser 32"" x 120"" " "L3000" "0" "Yes"
7282 "LATHES, ENGINE" "1960" "Monarch" "Model 90 Hydrostatic" "Good" "Yes" "1960 Monarch Model 90 Hydrostatic " "L3000" "-1" "Yes"
8548 "LATHES, ENGINE" "Monarch" "32NN" "Good" "Yes" " Monarch 32NN " "L3000" "0" "Yes"
8477 "LATHES, ENGINE" "1980" "National" "LHP36" "Good" "Yes" "1980 National LHP36 " "L3000" "0" "Yes"
8519 "LATHES, ENGINE" "Nebel" "55"" x 32'" "Good" "Yes" " Nebel 55"" x 32' " "L3000" "0" "Yes"
8428 "LATHES, ENGINE" "Niles" "40"" x 300""" "Fair" "Yes" " Niles 40"" x 300"" " "L3000" "0" "Yes"
7423 "LATHES, ENGINE" "Niles" "AP48H-M67" "Good" "Yes" " Niles AP48H-M67 " "L3000" "0" "Yes"
7808 "LATHES, ENGINE" "1977" "Poreba" "TR-135-B" "Very Good" "Yes" "53 1/8"" Swg., 41.33"" Swg OCS, 65"" Swg In Gap, 157.5"" Centers, 55 HP, 800 RPM, Inch Metric Threading, 60"" 4-Jaw Chuck, 36"" 4-Jaw Chuck, Shop Made Steady Rest, Power Rapids, Inch / Metric Threading" "1977 Poreba TR-135-B " "L3000" "0" "Yes"
8028 "LATHES, ENGINE" "1975" "Poreba" "TCG-125" "Very Good" "Yes" "1975 Poreba TCG-125 " "L3000" "0" "Yes"
8152 "LATHES, ENGINE" "1988" "Poreba" "TPK-90 / 2M" "Very Good" "Yes" "1988 Poreba TPK-90 / 2M " "L3000" "0" "Yes"
8335 "LATHES, ENGINE" "1984" "Poreba" "TPK-80-10M" "Good" "Yes" "32"" Swing, 21"" SOC, 394"", Centers, 800 RPM 30 HP, 28"" 3-Jaw Chuck and 32"" 4-Jaw Chuck, Four (4) Steady Rests, Four (4) Follow Rests, Power Rapid Traverse - Each Carriage, Hardened Ways, Inch / Metric Threading, Coolant Pump, Dual Carriage Design" "1984 Poreba TPK-80-10M " "L3000" "0" "Yes"
8203 "LATHES, ENGINE" "1968" "Skoda" "SRM-125" "Very Good" "Yes" "1968 Skoda SRM-125 " "L3000" "0" "Yes"
7549 "LATHES, ENGINE" "1968" "South Bend" "16"" x 144""" "Good" "Yes" "1968 South Bend 16"" x 144"" " "L3000" "-1" "Yes"
8001 "LATHES, ENGINE" "1978" "Summit" "36"" x 240""" "Good" "Yes" "1978 Summit 36"" x 240"" " "L3000" "0" "Yes"
8161 "LATHES, ENGINE" "1990" "Summit" "50"" x 320""" "Good" "Yes" "1990 Summit 50"" x 320"" " "L3000" "0" "Yes"
8030 "LATHES, ENGINE" "1991" "Summit" "50"" x 320""" "Good" "Yes" "1991 Summit 50"" x 320"" " "L3000" "0" "Yes"
8501 "LATHES, ENGINE" "Swift" "36"" x 120""" "Good" "Yes" " Swift 36"" x 120"" " "L3000" "0" "Yes"
8059 "LATHES, ENGINE" "T and B" "24"" x 120""" "Good" "Yes" " T and B 24"" x 120"" " "L3000" "0" "Yes"
8494 "LATHES, ENGINE" "1993" "Tarnow" "TUJ-50M" "Very Good" "Yes" "1993 Tarnow TUJ-50M " "L3000" "0" "Yes"
8498 "LATHES, ENGINE" "2000" "Tos" "SN-71C/4000" "Excellent" "Yes" "2000 Tos SN-71C/4000 " "L3000" "0" "Yes"
7851 "LATHES, ENGINE" "1975" "Tos" "SU-100" "Good" "Yes" "1975 Tos SU-100 " "L3000" "0" "Yes"
8535 "LATHES, ENGINE" "1990" "Tos" "SN-71C" "Fair" "Yes" "1990 Tos SN-71C " "L3000" "0" "Yes"
8160 "LATHES, ENGINE" "Tos" "SU-100" "Good" "Yes" " Tos SU-100 " "L3000" "0" "Yes"
8153 "LATHES, ENGINE" "1984" "Tos" "SN-71C" "Good" "Yes" "1984 Tos SN-71C " "L3000" "0" "Yes"
8058 "LATHES, ENGINE" "1995" "Tru-Turn" "CW6280" "Very Good" "Yes" "1995 Tru-Turn CW6280 " "L3000" "0" "Yes"
8429 "LATHES, ENGINE" "1969" "VDF" "V800" "Very Good" "Yes" "1969 VDF V800 " "L3000" "0" "Yes"
7865 "LATHES, ENGINE" "1952" "VDF" "E13" "Good" "Yes" "1952 VDF E13 " "L3000" "0" "Yes"
7793 "LATHES, ENGINE" "1981" "Wirth" "Model ARD" "Good" "Yes" "1981 Wirth Model ARD " "L3000" "0" "Yes"
8496 "LATHES, ENGINE" "1997" "Wolf" "37180G" "Very Good" "Yes" "1997 Wolf 37180G " "L3000" "0" "Yes"
8217 "LATHES, SECOND OPERATION" "1977" "Hardinge" "ASM-5C" "Good" "Yes" "1977 Hardinge ASM-5C " "L4805" "-1" "Yes"
8230 "LATHES, T TYPE" "2000" "Lansing" "CK64150" "Fanuc 10T" "Very Good" "Yes" "2000 Lansing CK64150 Fanuc 10T" "L5200" "0" "Yes"
7114 "LATHES, T TYPE" "1958" "Lodge and Shipley" "T-60" "Very Good" "Yes" "1958 Lodge and Shipley T-60 " "L5200" "0" "Yes"
7679 "LATHES, T TYPE" "1953" "Lodge and Shipley" "T-60" "Good" "Yes" "1953 Lodge and Shipley T-60 " "L5200" "0" "Yes"
7349 "LATHES, T TYPE" "Star" "T-Lathe" "Good" "No" "52"" Swing, 14"" Turning Length, 338 RPM, 25 HP, 51"" Face Plate, 36"" Face Plate" " Star T-Lathe " "L5200" "-1" "Yes"
8244 "LATHES, TURRET - RAM TYPE" "1965" "Gisholt" "#5" "Good" "Yes" "1965 Gisholt #5 " "L6249" "0" "Yes"
7925 "LATHES, TURRET - RAM TYPE" "1942/2000" "Warner and Swasey" "3A M-1200 Lot 288" "Good" "Yes" "15 3/8"" Swing, SOC 7"", Spindle Nose to Turret Face 26"", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck, Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7) Years Ago" "1942/2000 Warner and Swasey 3A M-1200 Lot 288 " "L6249" "-1" "Yes"
8169 "LATHES, TURRET - RAM TYPE" "1954" "Warner and Swasey" "3A M-1200" "Good" "Yes" "15 3/8"" Swing, SOC 7"", Spindle Nose to Turret Face 26"", 1,480 RPM, 7.5 HP, 6 position Turret, 8"" 3-Jaw Chuck, Coolant Pan and Pump, Single Tool Post" "1954 Warner and Swasey 3A M-1200 " "L6249" "-1" "Yes"
7918 "LATHES, TURRET - SADDLE TYPE" "19??" "Gisholt" "2L" "Needs Rapir" "Yes" "19?? Gisholt 2L " "L6304" "-1" "No"
7738 "LATHES, TURRET - SADDLE TYPE" "1968" "Gisholt" "2L" "Good" "Yes" "1968 Gisholt 2L " "L6304" "0" "Yes"
8167 "LATHES, TURRET - SADDLE TYPE" "Gisholt" "1L" "Good" "Yes" " Gisholt 1L " "L6304" "-1" "Yes"
7919 "LATHES, TURRET - SADDLE TYPE" "1964" "Gisholt" "1L" "Good" "Yes" "1964 Gisholt 1L " "L6304" "-1" "Yes"
8168 "LATHES, TURRET - SADDLE TYPE" "Gisholt" "1L" "Good" "Yes" " Gisholt 1L " "L6304" "-1" "Yes"
7403 "LATHES, TURRET - SADDLE TYPE" "1953" "Warner and Swasey" "2A M-510" "1953 Warner and Swasey 2A M-510 " "L6304" "-1"
7737 "LATHES, TURRET - SADDLE TYPE" "1964" "Warner and Swasey" "2A" "Good" "Yes" "1964 Warner and Swasey 2A " "L6304" "0" "Yes"
7285 "LATHES, TURRET - SADDLE TYPE" "1966" "Warner and Swasey" "4A M-3580" "Good" "Yes" "1966 Warner and Swasey 4A M-3580 " "L6304" "0" "Yes"
7286 "LATHES, TURRET - SADDLE TYPE" "1956" "Warner and Swasey" "4A M-3550" "Very Good" "Yes" "1956 Warner and Swasey 4A M-3550 " "L6304" "0" "Yes"
7287 "LATHES, TURRET - SADDLE TYPE" "1965" "Warner and Swasey" "4A M-3550" "Very Good" "Yes" "1965 Warner and Swasey 4A M-3550 " "L6304" "0" "Yes"
7921 "LATHES, TURRET - SADDLE TYPE" "1954" "Warner and Swasey" "4A M-3550" "NJ" "Yes" "1954 Warner and Swasey 4A M-3550 " "L6304" "-1" "Yes"
7662 "LATHES, TURRET - SADDLE TYPE" "1960" "Warner and Swasey" "3A M-3500" "Good" "Yes" "1960 Warner and Swasey 3A M-3500 " "L6304" "-1" "Yes"
8500 "LATHES, TURRET - SADDLE TYPE" "Warner and Swasey" "4A M-3550" "Good" "Yes" " Warner and Swasey 4A M-3550 " "L6304" "-1" "Yes"
7920 "LATHES, TURRET - SADDLE TYPE" "19??" "Warner and Swasey" "3A M-3500" "Fair" "Yes" "19?? Warner and Swasey 3A M-3500 " "L6304" "-1" "Yes"
7237 "MACHINING CENTER, VERT, CNC - 4 AXIS W- PALLETS" "2004" "Mazak" "Nexus VCN-410A" "Mazatrol Fusion 640 M" "Very Good" "Yes" "2004 Mazak Nexus VCN-410A Mazatrol Fusion 640 M" "M01854P" "0" "Yes"
8380 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2009" "Amera-Seiki" "VB-2" "Fanuc 21iMB" "New" "Yes" "2009 Amera-Seiki VB-2 Fanuc 21iMB" "M0120" "0" "Yes"
7825 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2007" "Amera-Seiki" "VB-2" "Fanuc 21iMB" "Like New" "Yes" "2007 Amera-Seiki VB-2 Fanuc 21iMB" "M0120" "-1" "Yes"
7346 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2006" "Amera-Seiki" "VB-3" "Fanuc 21iMB" "Like New" "Yes" "2006 Amera-Seiki VB-3 Fanuc 21iMB" "M0120" "0" "Yes"
7704 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2001" "Cincinnati" "U-5" "Acramatic A950MC" "Very Good" "Yes" "2001 Cincinnati U-5 Acramatic A950MC" "M0120" "0" "Yes"
7027 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1994" "Droop and Rein" "FPV 2500 SRC 30/50" "Fidia M20" "Very Good" "Yes" "1994 Droop and Rein FPV 2500 SRC 30/50 Fidia M20" "M0120" "0" "Yes"
7949 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2004" "Haas" "GR-510" "Haas 32 BIT" "Very Good" "Yes" "122"" x 53"" Table, 121"" x 61"" x 11"" Travels, 10,000 RPM, 40 Taper, 15 HP, 20 ATC, Remote Jog Handle, Midi Laser for Tool Calibration, Mida Probe for Piece Locating, Rigid Tapping, Two (2) Coolant Tanks, Two (2) Coolant Filtration System" "2004 Haas GR-510 Haas 32 BIT" "M0120" "-1" "Yes"
7803 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1995" "Kuraki" "KMV-130" "Fanuc 15M" "Good" "Yes" "1995 Kuraki KMV-130 Fanuc 15M" "M0120" "0" "Yes"
7624 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2001" "Masco" "Bridgemax" "Fanuc 16i" "Very Good" "Yes" "2001 Masco Bridgemax Fanuc 16i" "M0120" "0" "Yes"
7350 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1994" "Mighty Comet" "VMC B-3000G" "Mitsubishi Meldas 335MV" "Good" "Yes" "1994 Mighty Comet VMC B-3000G Mitsubishi Meldas 335MV" "M0120" "0" "Yes"
7271 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2002" "Mighty Viper" "B5000-5AB" "Fanuc 15M" "Good" "Yes" "2002 Mighty Viper B5000-5AB Fanuc 15M" "M0120" "0" "Yes"
7986 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1996" "Mitsubishi" "M-VS25A" "Fanuc 150MB" "Very Good" "Yes" "1996 Mitsubishi M-VS25A Fanuc 150MB" "M0120" "0" "Yes"
8005 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1997" "Nicolas Correa" "FP-30" "Siemens 840D" "Good" "Yes" "1997 Nicolas Correa FP-30 Siemens 840D" "M0120" "0" "Yes"
7799 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1998" "Nicolas Correa" "FP-30/40" "Fanuc 15MB" "Very Good" "Yes" "1998 Nicolas Correa FP-30/40 Fanuc 15MB" "M0120" "0" "Yes"
7218 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1997" "QuickMill" "Model 60-324-24" "Siemens S5 PLC" "Very Good" "Yes" "1997 QuickMill Model 60-324-24 Siemens S5 PLC" "M0120" "0" "Yes"
7714 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1990" "SNK" "RB-2N" "Fanuc OMC" "Good" "Yes" "1990 SNK RB-2N Fanuc OMC" "M0120" "0" "Yes"
7361 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1999" "SNK" "PM-6B Profiler" "Fanuc 15M" "Good" "Yes" "133' x 120"" Table, 132"" Distance Between Columns, Travel of Each Gantry 97', 120' x 120"" x 32"" Travels, +/- 25 A & B, 7,000 RPM, 50 Taper, 40 HP, Twin Gantry Machine with Three (3) Spindle Each" "1999 SNK PM-6B Profiler Fanuc 15M" "M0120" "0" "Yes"
7615 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2005" "SNK" "RB-4NM" "Fanuc 18iM" "Very Good" "Yes" "2005 SNK RB-4NM Fanuc 18iM" "M0120" "0" "Yes"
6315 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "2004" "Tarus" "HS-8412/54" "Very Good" "Yes" "2004 Tarus HS-8412/54 " "M0120" "0" "Yes"
8095 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1996" "Tarus" "HS-8412/48" "Tarus MBX92" "Good" "Yes" "1996 Tarus HS-8412/48 Tarus MBX92" "M0120" "0" "Yes"
7767 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1999" "Toshiba" "MPF-2140" "Tosnuc 888" "Very Good" "Yes" "1999 Toshiba MPF-2140 Tosnuc 888" "M0120" "0" "Yes"
7909 "MACHINING CENTERS, GANTRY TYPE, NC-CNC" "1998" "Toshiba (Shibaura)" "MPF-2614C" "Tosnuc 888" "Good" "Yes" "1998 Toshiba (Shibaura) MPF-2614C Tosnuc 888" "M0120" "0" "Yes"
7347 "MACHINING CENTERS, HORIZONTAL CNC" "2008" "Amera-Seiki" "A-50H" "Fanuc 18iMB" "Like New" "Yes" "2008 Amera-Seiki A-50H Fanuc 18iMB" "M0130" "0" "Yes"
6623 "MACHINING CENTERS, HORIZONTAL CNC" "1990" "Cincinnati" "T-10" "Acramatic 950" "Good" "Yes" "1990 Cincinnati T-10 Acramatic 950" "m0130" "-1" "Yes"
7939 "MACHINING CENTERS, HORIZONTAL CNC" "1991" "Cincinnati" "T-35" "Acramatic 950" "Very Good" "Yes" "1991 Cincinnati T-35 Acramatic 950" "M0130" "0" "Yes"
6602 "MACHINING CENTERS, HORIZONTAL CNC" "1992/04" "Cincinnati" "Maxim-500" "Fanuc 160iM" "Very Good" "Yes" "1992/04 Cincinnati Maxim-500 Fanuc 160iM" "M0130" "-1" "Yes"
6641 "MACHINING CENTERS, HORIZONTAL CNC" "1978" "Cincinnati" "10HC-2500" "Acramatic 2.1 Big Blue" "Very Good" "Yes" "1978 Cincinnati 10HC-2500 Acramatic 2.1 Big Blue" "M0130" "-1" "Yes"
6625 "MACHINING CENTERS, HORIZONTAL CNC" "1992/04" "Cincinnati" "Maxim-500" "Fanuc 160iM" "Very Good" "Yes" "Two (2) 19.7"" x 19.7"" Pallets, 360,000 Indexing, 29.5"" x 27.6"" x 29.5"" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 50 ATC, Chip Conveyor, Coolant Through Spindle, Machine Rebuilt and Retro-Fitted With Fanuc Control By Cincinnati, Now C Model" "1992/04 Cincinnati Maxim-500 Fanuc 160iM" "M0130" "-1" "Yes"
6624 "MACHINING CENTERS, HORIZONTAL CNC" "1989" "Cincinnati" "T-10" "Acramatic 950" "Good" "Yes" "1989 Cincinnati T-10 Acramatic 950" "M0130" "-1" "Yes"
7928 "MACHINING CENTERS, HORIZONTAL CNC" "1996" "Daewoo" "Ace H100" "Fanuc 15M" "Good" "Yes" "39.4"" Pallets, 1 Pallet Indexing, 78.70"" x 49.70"" x 39.40"" Travels, 4,500 RPM, 50 Taper, 35 HP, 60 ATC, Coolant Through Spindle (300 psi), Turbo Chip Conveyor, Rigid Tapping, Shower Coolant, Spindle Chiller Unit, Remote Jog Handle, Two Speed Geared Headstock" "1996 Daewoo Ace H100 Fanuc 15M" "M0130" "0" "Yes"
8016 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Daewoo" "DMH-400" "Fanuc 16M" "Very Good" "Yes" "16"" x 16"" Pallets, 1 Indexing, 23.6"" x 22"" x 22"" Travels, 12,000 RPM, 30 HP, 40 taper, 60 ATC, Chip Conveyor, Remote Pulse Generator, Coolant Through Spindle, Rigid Tapping, Chip Conveyor" "1999 Daewoo DMH-400 Fanuc 16M" "M0130" "0" "Yes"
7982 "MACHINING CENTERS, HORIZONTAL CNC" "1994" "Daewoo" "Ace H100" "Fanuc 15M" "Good" "Yes" "1994 Daewoo Ace H100 Fanuc 15M" "M0130" "-1" "Yes"
7936 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Daewoo" "Ace H100" "Fanuc 15M" "Good" "Yes" "1997 Daewoo Ace H100 Fanuc 15M" "M0130" "0" "Yes"
8179 "MACHINING CENTERS, HORIZONTAL CNC" "2002" "Deckel-Maho" "DMC-63H" "Siemens 840D" "Very Good" "Yes" "2002 Deckel-Maho DMC-63H Siemens 840D" "M0130" "0" "Yes"
8270 "MACHINING CENTERS, HORIZONTAL CNC" "2007" "Doosan" "HC-400" "Fanuc 21iMB" "Like New" "Yes" "2007 Doosan HC-400 Fanuc 21iMB" "M0130" "0" "Yes"
8101 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Haas" "EC-400" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas EC-400 Haas 32 BIT" "M0130" "0" "Yes"
7869 "MACHINING CENTERS, HORIZONTAL CNC" "2000" "Haas" "HS-1RP" "Haas 32 BIT" "Very Good" "Yes" "16"" x 16"" Pallets, 24"" x 20"" x 22"", 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two (2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5"" Floppy Drive" "2000 Haas HS-1RP Haas 32 BIT" "M0130" "-1" "Yes"
8445 "MACHINING CENTERS, HORIZONTAL CNC" "1987" "Hitachi-Seiki" "HC-630" "Fanuc 11M" "Good" "Yes" "1987 Hitachi-Seiki HC-630 Fanuc 11M" "M0130" "0" "Yes"
8520 "MACHINING CENTERS, HORIZONTAL CNC" "1995" "Hitachi-Seiki" "HG-800" "Fanuc 15MB" "Fair" "Yes" "31.5"" X 31.5"" Pallets, 44"" x 37"" x 33"" Travels, 6,000 RPM, 50 Taper, 30 HP, 60 ATC, 1 Deg., Manual Pulse Generator, Chip Conveyor, Rigid Tapping, Flood Coolant System, Spindle Chiller, Coolant Through Spindle, 320M Memory, 200 Tool Offsets" "1995 Hitachi-Seiki HG-800 Fanuc 15MB" "M0130" "-1" "Yes"
7490 "MACHINING CENTERS, HORIZONTAL CNC" "1998" "Hitachi-Seiki" "HS-630" "Seicos Sigma 16M" "Very Good" "Yes" "Two 24.8"" Pallets, 360,000 Indexing, 2,640 Lbs Table Load, 33.5"" x 31.5"" x 33.5"" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle" "1998 Hitachi-Seiki HS-630 Seicos Sigma 16M" "M0130" "-1" "Yes"
6953 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Hitachi-Seiki" "HG-400 II" "Fanuc 15MB" "Very Good" "Yes" "1997 Hitachi-Seiki HG-400 II Fanuc 15MB" "M0130" "-1" "Yes"
6772 "MACHINING CENTERS, HORIZONTAL CNC" "1985" "Kearney and Trecker" "MM-200" "GeminiI D" "Very Good" "Yes" "18"" x 18"" Pallets - Six, 360,000 Indexing, 24"" x 20"" x 20"" Travels, 4,000 RPM, Straight Shank, 20 HP, 120 ATC, Six (6) Extra Pallets, Coolant System" "1985 Kearney and Trecker MM-200 GeminiI D" "M0130" "-1" "Yes"
7274 "MACHINING CENTERS, HORIZONTAL CNC" "2005" "Kia" "HX-630" "Fanuc 18iMA" "Very Good" "Yes" "2005 Kia HX-630 Fanuc 18iMA" "m0130" "0" "Yes"
8094 "MACHINING CENTERS, HORIZONTAL CNC" "2005" "Kia" "KH-50G" "Fanuc 18iMB" "Very Good" "Yes" "19.7"" x 19.7"" Pallets, Full 4th, 29.9"" x 27.8"" x 25.6"" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid Tapping, Coolant Through Spindle, Remote Jog Handle, Machine Installed in 2007" "2005 Kia KH-50G Fanuc 18iMB" "M0130" "-1" "Yes"
7915 "MACHINING CENTERS, HORIZONTAL CNC" "2005" "Kitamura" "HX-300IF" "Fanuc 18M" "Excellent" "Yes" "12"" x 12"" Pallets, 20.1"" x 20.1"" x 15.7"", 20,000 RPM, 40 Taper, 20 HP, 40 ATC, 512K Memory, 200 Tool Offsets, Geared Head Machine, Expanded Work Offsets, Expanded Macros, Two (2) Kurt 4"" Jaw Tombstones, Two (2) Chick System 5 6"" Jaw Tombstones, Machine Loaded With Control Options, 85 Cutting Hours - Cutting Aluminum and Plastic" "2005 Kitamura HX-300IF Fanuc 18M" "M0130" "-1" "Yes"
8289 "MACHINING CENTERS, HORIZONTAL CNC" "1998" "Kitamura" "H-400" "Fanuc 15M" "Very Good" "Yes" "1998 Kitamura H-400 Fanuc 15M" "M0130" "0" "Yes"
7492 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Kitamura" "HX-300" "Fanuc 15M" "Very Good" "Yes" "12"" x 12"" Pallets, Full 4th, 20.1"" x 20.1"" x 15.7"" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic" "1999 Kitamura HX-300 Fanuc 15M" "M0130" "-1" "Yes"
8015 "MACHINING CENTERS, HORIZONTAL CNC" "2000" "Kitamura" "HX-300" "Fanuc 16iM" "Very Good" "Yes" "2000 Kitamura HX-300 Fanuc 16iM" "M0130" "0" "Yes"
8288 "MACHINING CENTERS, HORIZONTAL CNC" "2001" "Kitamura" "HX-400i" "Fanuc 16iM" "Very Good" "Yes" "2001 Kitamura HX-400i Fanuc 16iM" "M0130" "0" "Yes"
8020 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Kitamura" "H-400" "Fanuc 15M" "Good" "Yes" "1997 Kitamura H-400 Fanuc 15M" "M0130" "0" "Yes"
8326 "MACHINING CENTERS, HORIZONTAL CNC" "2001" "Kiwa" "KNH-400" "Fanuc 18iMA" "Very Good" "Yes" "15.75"" x 15.75"" Pallets, 23.62"" x 23.62"" x 19.68"" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse Generator, Chip Conveyor, Rigid Tapping" "2001 Kiwa KNH-400 Fanuc 18iMA" "M0130" "-1" "Yes"
8009 "MACHINING CENTERS, HORIZONTAL CNC" "2000" "Kuraki" "KHM-125" "Fanuc 16M" "Very Good" "Yes" "2000 Kuraki KHM-125 Fanuc 16M" "M0130" "0" "Yes"
8048 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Makino" "A-51" "Fanuc Pro 3" "Very Good" "Yes" "2004 Makino A-51 Fanuc Pro 3" "M0130" "0" "Yes"
7550 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Makino" "A-61" "Fanuc Pro 3" "Very Good" "Yes" "19.69"" Pallets, Full 4th, 38.74"" x 25.59"" x 28.74 Travels, 18,000 RPM, 63 Taper, 25 HP, 40 ATC, Coolant Through Spindle, Chip Conveyor, Helical Interpolation, Data Server, Speed Skip Function, Enhanced SG1.4 Control (High Speed Surfacing), Auto Work piece Measuring Device, Marposs Probe, Scale Feedback, Rotary Dynamic Fixture Offset, Very Low Hours" "2004 Makino A-61 Fanuc Pro 3" "M0130" "-1" "Yes"
8269 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Makino" "A-66" "Fanuc 16iM" "Good" "Yes" "1999 Makino A-66 Fanuc 16iM" "M0130" "0" "Yes"
7937 "MACHINING CENTERS, HORIZONTAL CNC" "1994" "Makino" "MCB-1210" "Fanuc 16M Pro3" "Good" "Yes" "1994 Makino MCB-1210 Fanuc 16M Pro3" "M0130" "0" "Yes"
8439 "MACHINING CENTERS, HORIZONTAL CNC" "2000" "Makino" "A-88" "Fanuc 160iM" "Very Good" "Yes" "2000 Makino A-88 Fanuc 160iM" "M0130" "0" "Yes"
8603 "MACHINING CENTERS, HORIZONTAL CNC" "2002" "Makino" "A-66" "Fanuc 16iM" "Good" "Yes" "2002 Makino A-66 Fanuc 16iM" "M0130" "0" "Yes"
8471 "MACHINING CENTERS, HORIZONTAL CNC" "2005" "Makino" "A-51" "Fanuc Pro 5" "Very Good" "Yes" "2005 Makino A-51 Fanuc Pro 5" "M0130" "0" "Yes"
7935 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Makino" "MCB-1210" "Fanuc 16M Pro3" "Very Good" "Yes" "1999 Makino MCB-1210 Fanuc 16M Pro3" "M0130" "0" "Yes"
8514 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Mazak" "H-580" "Mazatrol M-Plus" "Good" "Yes" "19.68"" x 19.68"" Pallets, 27.95"" x 24.01"" x 25.98"" Travels, 10,000 RPM, 40 Taper, 30 HP, 90 ATC, Full 4th, Coolant Through Spindle), Manual Pulse Generator, Chip Conveyor, Rigid Tapping, Palletech Prep, EIA / ISO Input Function, Monitoring System B (part probe), Multi-Tap Transformer, 1,000 Meters of Additional Memory" "1997 Mazak H-580 Mazatrol M-Plus" "M0130" "-1" "Yes"
6947 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Mazak" "H-580" "Mazatrol M-32B" "Good" "Yes" "1997 Mazak H-580 Mazatrol M-32B" "M0130" "-1" "Yes"
7500 "MACHINING CENTERS, HORIZONTAL CNC" "1989" "Mazak" "H-500 / 50N" "Mazatrol M-32" "Good" "Yes" "19.7"" X 19.7"" Pallets, Full 4th, 27.9"" x 25.5"" x 25.5"", 6,000 RPM, 50 Taper, 20 HP, 80 ATC, Chip Conveyor, RS-232 Port, Tool Life Monitoring, Chip Conveyor, Coolant Through Spindle, RS-232C Port for DNC Interface, Air Blast, Niagara Coolant System, Extra Pallets and Tombstones, Approximately 200 Tool Holders" "1989 Mazak H-500 / 50N Mazatrol M-32" "M0130" "-1" "Yes"
8121 "MACHINING CENTERS, HORIZONTAL CNC" "1996" "Mitsubishi" "M-H100C" "Mitsubishi 520M" "Very Good" "Yes" "1996 Mitsubishi M-H100C Mitsubishi 520M" "M0130" "0" "Yes"
7815 "MACHINING CENTERS, HORIZONTAL CNC" "1996" "Mitsubishi" "M-H80D" "Mitsubishi 520M" "Good" "Yes" "1996 Mitsubishi M-H80D Mitsubishi 520M" "M0130" "0" "Yes"
8580 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Mitsui-Seiki" "HS-6A" "Fanuc 15MB" "Very Geard" "Yes" "1999 Mitsui-Seiki HS-6A Fanuc 15MB" "M0130" "0" "Yes"
7975 "MACHINING CENTERS, HORIZONTAL CNC" "1993" "Mitsui-Seiki" "JIDIC-H6C" "Fanuc 15M" "Very Good" "Yes" "1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M" "M0130" "-1" "Yes"
8611 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Mori-Seiki" "NH-5000" "Mori-Seiki MSG-501" "Good" "Yes" "2004 Mori-Seiki NH-5000 Mori-Seiki MSG-501" "M0130" "0" "Yes"
8610 "MACHINING CENTERS, HORIZONTAL CNC" "2006" "Mori-Seiki" "NH-4000" "Mori-Seiki MSG-501" "Very Good" "Yes" "2006 Mori-Seiki NH-4000 Mori-Seiki MSG-501" "M0130" "0" "Yes"
8242 "MACHINING CENTERS, HORIZONTAL CNC" "2007" "Mori-Seiki" "NH-5000" "Mori-Seiki MSX-701M" "Very Good" "Yes" "2007 Mori-Seiki NH-5000 Mori-Seiki MSX-701M" "M0130" "0" "Yes"
8609 "MACHINING CENTERS, HORIZONTAL CNC" "2002" "Mori-Seiki" "NH-5000" "Mori-Seiki MSG-501" "Good" "Yes" "2002 Mori-Seiki NH-5000 Mori-Seiki MSG-501" "M0130" "0" "Yes"
7940 "MACHINING CENTERS, HORIZONTAL CNC" "2007" "Mori-Seiki" "NH-8000 DCG" "Mori-Seiki MSX-501" "Never Used" "Yes" "2007 Mori-Seiki NH-8000 DCG Mori-Seiki MSX-501" "M0130" "0" "Yes"
8617 "MACHINING CENTERS, HORIZONTAL CNC" "2001" "Mori-Seiki" "SH-403" "Mori-Seiki MSG-501" "Very Good" "Yes" "2001 Mori-Seiki SH-403 Mori-Seiki MSG-501" "M0130" "0" "Yes"
8621 "MACHINING CENTERS, HORIZONTAL CNC" "2001" "Mori-Seiki" "SH-503 / 50" "Moric MSG-502" "Good" "Yes" "2001 Mori-Seiki SH-503 / 50 Moric MSG-502" "M0130" "0" "Yes"
7933 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Niigata" "HN-80D" "Fanuc 16iMA" "Very Good" "Yes" "1997 Niigata HN-80D Fanuc 16iMA" "M0130" "0" "Yes"
7364 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Niigata" "SPN-40" "Fanuc 16iM" "Very Good" "Yes" "2004 Niigata SPN-40 Fanuc 16iM" "M0130" "0" "Yes"
8346 "MACHINING CENTERS, HORIZONTAL CNC" "1999" "Niigata" "SPN-63" "Fanuc 16iM" "Very Good" "Yes" "1999 Niigata SPN-63 Fanuc 16iM" "M0130" "0" "Yes"
8017 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Niigata" "SPN-40" "Fanuc 16iM" "Very Good" "Yes" "1997 Niigata SPN-40 Fanuc 16iM" "M0130" "0" "Yes"
8181 "MACHINING CENTERS, HORIZONTAL CNC" "2007" "OKK" "HP-500 S" "Fanuc I80i SMB" "Excellent" "Yes" "2007 OKK HP-500 S Fanuc I80i SMB" "M0130" "0" "Yes"
8175 "MACHINING CENTERS, HORIZONTAL CNC" "2006" "Okuma" "MA-600 HB" "OSP-P200M" "Like New" "Yes" "2006 Okuma MA-600 HB OSP-P200M" "M0130" "-1" "Yes"
8246 "MACHINING CENTERS, HORIZONTAL CNC" "2004" "Okuma" "MA-400 HA" "OSP-E100M" "Very Good" "Yes" "2004 Okuma MA-400 HA OSP-E100M" "M0130" "0" "Yes"
8323 "MACHINING CENTERS, HORIZONTAL CNC" "2001" "Okuma and Howa" "Millac 550H" "Fanuc 16iM" "Very Good" "Yes" "19.68"" x 19.68"" Pallets, 31.5"" x 31.5"" x 27.5"" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500 Cutting Hours, Cutting Only Aluminum" "2001 Okuma and Howa Millac 550H Fanuc 16iM" "M0130" "-1" "Yes"
8584 "MACHINING CENTERS, HORIZONTAL CNC" "1996" "Toshiba" "BMC-100E" "Tosnuc 888" "Good" "Yes" "Ten 39.4"" X 39.4"" Pallets, 360,000 Indexing, 78"" x 59"" x 47"" Travels, 5,000 RPM, 50 Taper, 40 HP, 120 ATC, Coolant Through Spindle, Color Monitor, Chip Conveyor, Spindle Chiller" "1996 Toshiba BMC-100E Tosnuc 888" "M0130" "0" "Yes"
7610 "MACHINING CENTERS, HORIZONTAL CNC" "1997" "Toshiba" "BMC-800" "Tosnuc 888" "Very Good" "Yes" "1997 Toshiba BMC-800 Tosnuc 888" "M0130" "0" "Yes"
8110 "MACHINING CENTERS, HORIZONTAL CNC" "2006" "Toyoda" "FA-630" "Fanuc 16iMB" "Very Good" "Yes" "2006 Toyoda FA-630 Fanuc 16iMB" "M0130" "0" "Yes"
7189 "MACHINING CENTERS, VERTICAL, CNC" "1983" "Acroloc" "Series 10" "Fanuc 6MB" "Good" "Yes" "1983 Acroloc Series 10 Fanuc 6MB" "m0185" "-1" "Yes"
7950 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Amera-Seiki" "A-1" "Mitsubishi 64SM" "Like New" "Yes" "2007 Amera-Seiki A-1 Mitsubishi 64SM" "M0185" "-1" "Yes"
7990 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Amera-Seiki" "A-5" "Fanuc OiMC" "New" "Yes" "2008 Amera-Seiki A-5 Fanuc OiMC" "M0185" "-1" "Yes"
7345 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Amera-Seiki" "A-1" "Mitsubishi 64SM" "Like New" "Yes" "2006 Amera-Seiki A-1 Mitsubishi 64SM" "M0185" "0" "Yes"
7471 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Amera-Seiki" "A-2" "Fanuc OiMC" "Demo Machine" "Yes" "2008 Amera-Seiki A-2 Fanuc OiMC" "M0185" "-1" "Yes"
6405 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Amera-Seiki" "A-3" "Fanuc OiMB" "Like New" "Yes" "2005 Amera-Seiki A-3 Fanuc OiMB" "M0185" "-1" "Yes"
7093 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Awea" "BM-1600" "Fanuc 18iMB" "Very Good" "Yes" "2005 Awea BM-1600 Fanuc 18iMB" "M0185" "0" "Yes"
7721 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Bostomatic" "605" "Bostomatic BDC-3200X" "Good" "Yes" "1998 Bostomatic 605 Bostomatic BDC-3200X" "M0185" "0" "Yes"
8109 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Bostomatic" "505" "Bostomatic BDC-3200X" "Good" "Yes" "1996 Bostomatic 505 Bostomatic BDC-3200X" "M0185" "-1" "Yes"
7828 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Bridgeport" "Torq-Cut 22" "Bridgeport DX-32" "Good" "Yes" "1995 Bridgeport Torq-Cut 22 Bridgeport DX-32" "M0185" "0" "Yes"
8044 "MACHINING CENTERS, VERTICAL, CNC" "1990" "Butler Elgamill" "HE 28363" "Heidenhain 355" "Good" "Yes" "315"" x 32"" Table, 244"" x 65"" x 38"" Travels, A-Axis Travel 130,000, B-Axis Travel 360,000, 3,000 RPM, 50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel Head, Power Draw Bar" "1990 Butler Elgamill HE 28363 Heidenhain 355" "M0185" "-1" "Yes"
7846 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Cincinnati" "Arrow 1000" "Acramatic 2100" "Good" "Yes" "2000 Cincinnati Arrow 1000 Acramatic 2100" "M0185" "0" "Yes"
7571 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Cincinnati" "Sabre-1000" "Fanuc 18iMA" "Very Good" "Yes" "1998 Cincinnati Sabre-1000 Fanuc 18iMA" "M0185" "0" "Yes"
7868 "MACHINING CENTERS, VERTICAL, CNC" "1994" "Cincinnati" "Sabre-750" "Acramatic 850 SX" "Very Good" "Yes" "34"" x 20"" Table, 8,000 RPM, 15 HP, 40 Taper, 21 ATC, Rigid Tapping, 500 KB Extended Memory, Remote Pulse Generator, Spindle Nose Air Knife, Rigid Tapping, RS-232 Port" "1994 Cincinnati Sabre-750 Acramatic 850 SX" "M0185" "0" "Yes"
7854 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Cincinnati" "Arrow-750" "Techniques FNC 4" "Good" "Yes" "1995 Cincinnati Arrow-750 Techniques FNC 4" "M0185" "0" "Yes"
7567 "MACHINING CENTERS, VERTICAL, CNC" "1991" "Cincinnati" "Sabre-1250" "Acramatic 850 SX" "Good" "Yes" "1991 Cincinnati Sabre-1250 Acramatic 850 SX" "M0185" "0" "NO"
7078 "MACHINING CENTERS, VERTICAL, CNC" "1987/07" "Cincinnati" "20V-120" "Centroid M 400" "Very Good" "Yes" "1987/07 Cincinnati 20V-120 Centroid M 400" "M0185" "0" "Yes"
7081 "MACHINING CENTERS, VERTICAL, CNC" "1985/07" "Cincinnati" "20V-80" "Centroid M 400" "Very Good" "Yes" "1985/07 Cincinnati 20V-80 Centroid M 400" "M0185" "0" "Yes"
7849 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Cincinnati" "Arrow 2000" "Acramatic 2100" "Good" "Yes" "1997 Cincinnati Arrow 2000 Acramatic 2100" "M0185" "0" "On Way"
7566 "MACHINING CENTERS, VERTICAL, CNC" "1994" "Cincinnati" "Sabre-1000" "Acramatic 850 SX" "Good" "Yes" "44"" x 20"" Table, 40"" x 20"" x 22"", 8,000 RPM, 40 Taper, 21 ATC, 945 IPM" "1994 Cincinnati Sabre-1000 Acramatic 850 SX" "M0185" "0" "Yes"
7692 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Cincinnati" "Lancer V-5 2000" "Acramatic 2100" "Very Good" "Yes" "2000 Cincinnati Lancer V-5 2000 Acramatic 2100" "M0185" "0" "Yes"
7121 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Daewoo" "Ace V-50" "Fanuc OMC" "Good" "Yes" "1996 Daewoo Ace V-50 Fanuc OMC" "M0185" "0" "Yes"
8329 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Daewoo" "DMV-650" "Fanuc 18MC" "Good" "Yes" "1998 Daewoo DMV-650 Fanuc 18MC" "M0185" "0" "Yes"
6984 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Daewoo" "Mynx-500" "Fanuc 21M" "Very Good" "Yes" "1999 Daewoo Mynx-500 Fanuc 21M" "M0185" "0" "Yes"
8376 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Dah Lih" "MCV-2100" "Fanuc 21iMB" "Very Good" "Yes" "2006 Dah Lih MCV-2100 Fanuc 21iMB" "M0185" "0" "Yes"
7331 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Deckel-Maho" "DMU-70 Evolution" "Heidenhain MillsPlus IT" "Very Good" "Yes" "2005 Deckel-Maho DMU-70 Evolution Heidenhain MillsPlus IT" "M0185" "0" "Yes"
7367 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Deckel-Maho" "DMU-50" "Heidenhain iTNC 530" "Very Good" "Yes" "2005 Deckel-Maho DMU-50 Heidenhain iTNC 530" "M0185" "0" "Yes"
8273 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Doosan" "DMV-4020 / 40" "Fanuc 21iMB" "Excellent" "Yes" "2004 Doosan DMV-4020 / 40 Fanuc 21iMB" "M0185" "-1" "Yes"
8245 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Doosan" "DMV-3016L" "Fanuc 0iMC" "Like New" "Yes" "2007 Doosan DMV-3016L Fanuc 0iMC" "M0185" "0" "Yes"
8221 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Fadal" "VMC-4020 HT" "Fadal 88HS" "Very Good" "Yes" "47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Tool Load Compensation, Renishaw MP-12 Probe, Chip Conveyor, 422K Extended Memory, Remote Jog Handle, RS-232 Port, Baldor Vector Drives, Fadal Rotary Table With Tailstock And 3"" Riser, Fifty (50) Cat 40 Tool Holders, 4th Axis Pre-Wired" "1996 Fadal VMC-4020 HT Fadal 88HS" "M0185" "-1" "Yes"
7530 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Fadal" "VMC-4020 HT" "Fadal 88HS" "Good" "Yes" "47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power" "2000 Fadal VMC-4020 HT Fadal 88HS" "M0185" "0" "Yes"
7052 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Fadal" "VMC-5020A" "Fadal 88HS" "Good" "Yes" "1999 Fadal VMC-5020A Fadal 88HS" "M0185" "-1" "Yes"
8029 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Fadal" "VMC-6030" "Fadal 88" "Vey Good" "Yes" "2000 Fadal VMC-6030 Fadal 88" "M0185" "0" "Yes"
7529 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Fadal" "VMC-3016 HT" "Fadal 32MP CNC" "Good" "Yes" "39"" x 16"" Table, 30"" x 16"" x 20"" Travels, 10,000 RPM, 15 HP, 21 ATC" "1996 Fadal VMC-3016 HT Fadal 32MP CNC" "M0185" "0" "Yes"
7491 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Fadal" "VMC-4525" "Fadal 32MP CNC" "Very Good" "Yes" "2002 Fadal VMC-4525 Fadal 32MP CNC" "M0185" "0" "Yes"
7689 "MACHINING CENTERS, VERTICAL, CNC" "1991" "Fadal" "VMC-6030" "Fadal 88" "Good" "Yes" "62.5"" x 30"" Table, 10,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port" "1991 Fadal VMC-6030 Fadal 88" "M0185" "-1" "Yes"
7299 "MACHINING CENTERS, VERTICAL, CNC" "1990" "Fadal" "VMC-4020" "Fadal 88HS" "Very Good" "Yes" "1990 Fadal VMC-4020 Fadal 88HS" "M0185" "-1" "Yes"
8596 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Fadal" "VMC-8030" "Fadal 88HS" "Good" "Yes" "1999 Fadal VMC-8030 Fadal 88HS" "M0185" "0" "Yes"
8051 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Fadal" "VMC-15 XT" "Fadal 88HS" "Good" "Yes" "1996 Fadal VMC-15 XT Fadal 88HS" "M0185" "0" "Yes"
8055 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Fadal" "VMC-3016 HT" "Fadal 32MP CNC" "Good" "Yes" "1996 Fadal VMC-3016 HT Fadal 32MP CNC" "M0185" "0" "Yes"
8056 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Fadal" "VMC-3016L" "Fadal 32MP CNC" "Very Good" "Yes" "34"" x 16"" Table, 30"" x 16"" x 28"" Travels, 7,500 RPM, 15 HP, 21 ATC, Rigid Tapping, RS-232 Port, Extended Z-Travel, 4th Axis Prewired, 4 Meg of Memory" "2002 Fadal VMC-3016L Fadal 32MP CNC" "M0185" "0" "Yes"
8088 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Fadal" "VMC-4020" "Fadal 88HS" "Good" "Yes" "1997 Fadal VMC-4020 Fadal 88HS" "M0185" "-1" "Yes"
8600 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Fadal" "VMC-8030" "Fadal 32MP CNC" "Very Good" "Yes" "82.5"" x 30"" Table, 80"" x 30"" x 30"" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Pentium CPU, Rigid Tapping, Coolant System, 8 MB Expanded Memory, Networking Capable, High Capacity Hard Drive" "2005 Fadal VMC-8030 Fadal 32MP CNC" "M0185" "0" "Yes"
8090 "MACHINING CENTERS, VERTICAL, CNC" "1991" "Fadal" "VMC-4020" "Fadal 88" "Good" "Yes" "1991 Fadal VMC-4020 Fadal 88" "M0185" "-1" "Yes"
8053 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Fadal" "VMC-15 XT" "Fadal 88HS" "Very Good" "Yes" "1996 Fadal VMC-15 XT Fadal 88HS" "M0185" "0" "Yes"
7266 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Fadal" "VMC-6535" "Fadal 32MP CNC" "Good" "Yes" "2002 Fadal VMC-6535 Fadal 32MP CNC" "M0185" "0" "Yes"
8054 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Fadal" "VMC-3016" "Fadal 88HS" "Good" "Yes" "1995 Fadal VMC-3016 Fadal 88HS" "M0185" "0" "Yes"
7774 "MACHINING CENTERS, VERTICAL, CNC" "H.H. Roberts" "TW-31 MVI / 3300" "Anilam Series 1400" "Good" "Yes" " H.H. Roberts TW-31 MVI / 3300 Anilam Series 1400" "M0185" "-1" "Yes"
8408 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "TM-1" "Haas 32 BIT" "Like New" "Yes" "47.75"" x 10.5"" Table, 30"" x 12"" x 16"" Travels, 4,000 RPM, 40 Taper, 7.5 HP, Coolant Pump, 1 Meg of Memory, USB Port, Kurt Vise, Fifteen (15) Cat 40 Tool Holders, Rigid Tapping, Only 200 Hours Cutting Plastic, Machine Installed in 2008" "2007 Haas TM-1 Haas 32 BIT" "m0185" "-1" "Yes"
8423 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas" "VF-2 SS YT" "Haas 32 BIT" "Excellent" "Yes" "2008 Haas VF-2 SS YT Haas 32 BIT" "M0185" "-1" "Yes"
8274 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-2" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-2 Haas 32 BIT" "M0185" "0" "Yes"
8581 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Haas" "VF-3" "Haas 32 BIT" "Good" "Yes" "1997 Haas VF-3 Haas 32 BIT" "M0185" "0" "Yes"
8406 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Haas" "VF-8/40" "Haas 32 BIT" "Very Good" "Yes" "1998 Haas VF-8/40 Haas 32 BIT" "M0185" "0" "Yes"
8405 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas " "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2008 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
7824 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Like New" "Yes" "2008 Haas Super Mini-Mill Haas 32 BIT" "M0185" "-1" "Yes"
7817 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-5/40 Haas 32 BIT" "M0185" "-1" "Yes"
8559 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "Super Mini-Mill 2" "Excellent" "Yes" "2004 Haas Super Mini-Mill 2 " "M0185" "0" "Yes"
8558 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "VF-O" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas VF-O Haas 32 BIT" "M0185" "0" "Yes"
8424 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "28.75"" x 12"" Table, 16"" x 12"" x 10"" Travels, 6,000 RPM, 40 Taper, 7.5 HP, 10 ATC, Rigid Tapping, Coolant Pump, Quick Code, Coordinate Rotation and Scaling, Quick Code, Macros, High Speed Machining, 4th Axis Interface (no tables), Spindle Orientation" "2001 Haas Mini-Mill Haas 32 BIT" "M0185" "-1" "Yes"
8557 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "TM-1" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas TM-1 Haas 32 BIT" "M0185" "0" "Yes"
8437 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-3 SS" "Haas 32 BIT" "Excellent" "Yes" "48"" X 18"" Table, 12,000 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5"" Floppy Drive, Programmable Coolant Nozzel, Two (2) Speed Gear Box, Coordinate Rotation and Scaling" "2007 Haas VF-3 SS Haas 32 BIT" "M0185" "-1" "Yes"
8551 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
8026 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-6/40" "Haas 32 BIT" "Excellent" "Yes" "64"" x 28""Table, 64"" x 32"" x 30"" Travels, 7,500 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, Rigid Tapping, 3.5"" Floppy Drive, Programmable Coolant, Visual Quick Code, Remote Jog Handle, USB Port, 4th Axis Interface, 1 Meg of Memory" "2007 Haas VF-6/40 Haas 32 BIT" "M0185" "-1" "Yes"
8531 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-1" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-1 Haas 32 BIT" "M0185" "0" "Yes"
8539 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Haas" "VF-6/40" "Haas 32 BIT" "Good" "Yes" "1998 Haas VF-6/40 Haas 32 BIT" "M0185" "0" "Yes"
8533 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Haas" "VF-OE" "Haas 32 BIT" "Good" "Yes" "1999 Haas VF-OE Haas 32 BIT" "M0185" "0" "Yes"
7904 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2000 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
8379 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-3" "Haas 32 BIT" "Excellent" "Yes" "2007 Haas VF-3 Haas 32 BIT" "M0185" "0" "Yes"
8302 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-6/50 TR" "Haas 32 BIT" "Excellent" "Yes" "12.2"" Built-In Trunnion TableTable, 64"" x 32"" x 30"" Travels, 7,500 RPM, 50 Taper, 30 HP, 30 ATC, Chip Auger, Rigid Tapping, 3.5"" Floppy Drive, Programmable Coolant, Visual Quick Code, Remote Jog Handle, 16 Meg of Memory, Coolant Through Spindle, Haas Visual Quick Code Probbing System, High Speed Machining With Look Ahead, Extended Z-Axis Clearance (8"" Riser), Auxiliary Coolant Filter System For Coolant Through Spindle, High Intensity Lighting, Visual Quick Code Programming System, Spindle Orientation, User " "2007 Haas VF-6/50 TR Haas 32 BIT" "M0185" "-1" "Yes"
8341 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "HS-1RP" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas HS-1RP Haas 32 BIT" "M0185" "-1" "Yes"
8492 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "VM-3" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas VM-3 Haas 32 BIT" "M0185" "0" "Yes"
8352 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8354 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8446 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "TM-1" "Excellent" "Yes" "2004 Haas TM-1 " "M0185" "0" "Yes"
8483 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "VF-3" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas VF-3 Haas 32 BIT" "M0185" "0" "Yes"
8404 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-6/50" "Haas 32 BIT" "Very Good" "Yes" "2007 Haas VF-6/50 Haas 32 BIT" "M0185" "0" "Yes"
7984 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-2" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-2 Haas 32 BIT" "M0185" "0" "Yes"
8538 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Haas" "VF-6/50" "Haas 32 BIT" "Good" "Yes" "2000 Haas VF-6/50 Haas 32 BIT" "M0185" "0" "Yes"
8401 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Haas" "VF-2" "Haas 32 BIT" "Very Good" "Yes" "2000 Haas VF-2 Haas 32 BIT" "M0185" "0" "Yes"
8378 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Haas" "VF-7/50" "Haas 32 BIT" "Very Good" "Yes" "1998 Haas VF-7/50 Haas 32 BIT" "M0185" "0" "Yes"
8276 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-3" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-3 Haas 32 BIT" "M0185" "0" "Yes"
8593 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
7891 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Haas" "VF-4" "Haas 32 BIT" "Very Good" "Yes" "1999 Haas VF-4 Haas 32 BIT" "M0185" "0" "Yes"
8387 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas Super Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
7553 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2007 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8278 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Haas" "VF-4" "Haas 32 BIT" "Very Good" "Yes" "1999 Haas VF-4 Haas 32 BIT" "M0185" "0" "Yes"
8275 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
8398 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Haas" "VF-10/40" "Haas 32 BIT" "Good" "Yes" "120"" x 28"" Table, 10,000 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5"" Floppy Drive, Programmable Coolant Nozzel, Coolant Through Spindle, Chip Auger" "1999 Haas VF-10/40 Haas 32 BIT" "M0185" "0" "Yes"
8399 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Haas" "VF-1" "Haas 32 BIT" "Very Good" "Yes" "1998 Haas VF-1 Haas 32 BIT" "M0185" "0" "Yes"
8301 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-3 BYT/40" "Haas 32 BIT" "Excellent" "Yes" "2007 Haas VF-3 BYT/40 Haas 32 BIT" "M0185" "-1" "Yes"
8400 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Excellent" "Yes" "2007 Haas Super Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
7695 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Haas" "VF-5/40" "Haas 32 BIT" "Good" "Yes" "1998 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
7890 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-2 SS" "Haas 32 BIT" "Excellent" "Yes" "2004 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8070 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
8035 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "VF-8/40" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas VF-8/40 Haas 32 BIT" "M0185" "0" "Yes"
8040 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas Super Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
8097 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas" "VF-3 YT/50" "Haas 32 BIT" "Excellent" "Yes" "2008 Haas VF-3 YT/50 Haas 32 BIT" "M0185" "-1" "Yes"
8451 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-5/50" "Haas 32 BIT" "Very Good" "Yes" "52"" x 23"" Table, 50"" x 26"" x 25"" Travels, 7,500 RPM, 50 Taper, 30 HP, 30 ATC, Coolant Through Spindle (300 psi), Geared Head, Fifty Five (55) Gallon Coolant Tank, Rigid Tapping, Chip Auger, Programmable Coolant, 1 MB Program Memory, Visual Quick Code, Remote Pulse Generator, USB Port, 3.5"" Floppy Drive, RS-232 Port" "2007 Haas VF-5/50 Haas 32 BIT" "M0185" "-1" "Yes"
8214 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VM-3" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VM-3 Haas 32 BIT" "M0185" "0" "Yes"
8209 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-3 SS" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-3 SS Haas 32 BIT" "M0185" "0" "Yes"
8186 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "VF-4" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas VF-4 Haas 32 BIT" "M0185" "-1" "Yes"
8469 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Haas" "VF-O" "Haas 32 BIT" "Very Good" "Yes" "1999 Haas VF-O Haas 32 BIT" "M0185" "0" "Yes"
8178 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas" "VF-2 SS" "Haas 32 BIT" "Like New" "Yes" "2008 Haas VF-2 SS Haas 32 BIT" "M0185" "-1" "Yes"
8173 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8172 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
8171 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Haas" "Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2000 Haas Mini-Mill Haas 32 BIT" "M0185" "-1" "Yes"
8369 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Haas" "VF-3" "Haas 32 BIT" "Good" "Yes" "48"" x 18"" Table, 40"" x 20"" x 25"" Travels, 7,500 RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5"" Floppy, RS-232 Port, High Intensity Lighting, Spindle Orientation" "2000 Haas VF-3 Haas 32 BIT" "M0185" "-1" "Yes"
8060 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2007 Haas Super Mini-Mill Haas 32 BIT" "M0185" "-1" "Yes"
8472 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-2 SS Haas 32 BIT" "M0185" "0" "Yes"
8150 "MACHINING CENTERS, VERTICAL, CNC" "2003" "Haas" "VF-2" "Creative Evolution Control" "Very Good" "Yes" "2003 Haas VF-2 Creative Evolution Control" "M0185" "0" "Yes"
8148 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-2 SS Haas 32 BIT" "M0185" "-1" "Yes"
8473 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Haas" "VF-4 SS" "Haas 32 BIT" "Very Good" "Yes" "2005 Haas VF-4 SS Haas 32 BIT" "M0185" "0" "Yes"
8147 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Haas" "GR-512" "Haas 32 BIT" "Good" "Yes" "2004 Haas GR-512 Haas 32 BIT" "M0185" "0" "Yes"
7197 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Haas" "VR-11" "Haas 32 BIT" "Good" "Yes" "1997 Haas VR-11 Haas 32 BIT" "M0185" "-1" "Yes"
8120 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "VM-3" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas VM-3 Haas 32 BIT" "M0185" "0" "Yes"
8461 "MACHINING CENTERS, VERTICAL, CNC" "2003" "Haas" "VF-3" "Haas 32 BIT" "Good" "Yes" "2003 Haas VF-3 Haas 32 BIT" "M0185" "0" "Yes"
7394 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
8465 "MACHINING CENTERS, VERTICAL, CNC" "2007" "Haas" "VF-9/40" "Haas 32 BIT" "Like New" "Yes" "2007 Haas VF-9/40 Haas 32 BIT" "M0185" "0" "Yes"
8104 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "VF-5/40" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas VF-5/40 Haas 32 BIT" "M0185" "0" "Yes"
8466 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Haas" "VF-6/40" "Haas 32 BIT" "Excellent" "Yes" "2008 Haas VF-6/40 Haas 32 BIT" "M0185" "0" "Yes"
8467 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Haas" "Super Mini-Mill" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas Super Mini-Mill Haas 32 BIT" "M0185" "0" "Yes"
8468 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Haas" "VF-4" "Haas 32 BIT" "Very Good" "Yes" "2001 Haas VF-4 Haas 32 BIT" "M0185" "0" "Yes"
7455 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Haas" "VM-3" "Haas 32 BIT" "Like New" "Yes" "2006 Haas VM-3 Haas 32 BIT" "M0185" "0" "Yes"
6908 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Hardinge" "VMC-1000" "Fanuc OMD" "Good" "Yes" "1999 Hardinge VMC-1000 Fanuc OMD" "M0185" "0" "Yes"
7537 "MACHINING CENTERS, VERTICAL, CNC" "1988" "Hitachi-Seiki" "VK-55" "Seicos MII" "Good" "Yes" "55"" x 22""Table, Distance Between Spindles 23.62"", 4,500 RPM, 20 HP, 50 Taper, 20 ATC, Rigid Tapping, Remote Jog Handle, Coolant System, Twin Spindle Machine" "1988 Hitachi-Seiki VK-55 Seicos MII" "M0185" "-1" "Yes"
7770 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Hurco" "BMC-4020" "Ultramax III/Single CRT" "Very Good" "Yes" "1997 Hurco BMC-4020 Ultramax III/Single CRT" "M0185" "0" "Yes"
8560 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Hurco" "VM-1" "Ultramax Max 32" "Very Good" "Yes" "28"" x 14"" Table, 26"" x 14"" x 18.18"" Travels, 8,000 RPM, 40 Taper, 15 HP, 16 ATC" "2004 Hurco VM-1 Ultramax Max 32" "M0185" "-1" "Yes"
8024 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Hurco" "VMX-64 40T" "Hurco WinMax" "Excellent" "Yes" "65.98"" x 35.04"" Table, 5,997 Table Load, 63.98"" , 33.86"" x 29.92"" Travels, 10,000 RPM, 40 Taper, 24 HP, 24 ATC, Rigid Tapping, Remote Jog Handle, Touch Dual Screen Control, Ultra Pocket Software, Ultradraw DXF Converter - Very Low Hours" "2004 Hurco VMX-64 40T Hurco WinMax" "M0185" "-1" "Yes"
8431 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Hurco" "VM-1" "Ultramax Max 32" "Excellent" "Yes" "28"" x 14"" Table, 26"" x 14"" x 18.18"" Travels, 8,000 RPM, 40 Taper, 15 HP, 16 ATC" "2004 Hurco VM-1 Ultramax Max 32" "M0185" "0" "Yes"
8348 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Hurco" "BMC-30" "Ultramax III/Dual CRT" "Very Good" "Yes" "1995 Hurco BMC-30 Ultramax III/Dual CRT" "M0185" "0" "Yes"
8426 "MACHINING CENTERS, VERTICAL, CNC" "2008" "Hurco" "VM-1" "Ultramax Max 32" "Excellent" "Yes" "28"" x 14"" Table, 26"" x 14"" x 18.18"" Travels, 8,000 RPM, 40 Taper, 15 HP, 16 ATC, Industry NC Software (fanuc), Max Classic Package, Conversational Programming, Touch Screen, 8 Meg of Memory, 1 GB Hard Drive Upgrade, Rigid Tapping, 64 Bit Control, 1,100 Blocks Per Second Look Ahead Machining, Oil Skimmer, 1,231 Power on Hours" "2008 Hurco VM-1 Ultramax Max 32" "M0185" "0" "Yes"
7158 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Hurco" "MXU-40" "Ultramax IV/Dual CRT" "Very Good" "Yes" "2004 Hurco MXU-40 Ultramax IV/Dual CRT" "M0185" "0" "Yes"
8149 "MACHINING CENTERS, VERTICAL, CNC" "2003" "Hurco" "VM-2" "Ultramax IV" "Very Good" "Yes" "2003 Hurco VM-2 Ultramax IV" "M0185" "0" "Yes"
7164 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Hurco" "VMX-40" "Ultramax IV/Dual CRT" "Good" "Yes" "2001 Hurco VMX-40 Ultramax IV/Dual CRT" "M0185" "0" "Yes"
7386 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Johnford" "VMC-1300" "Fanuc OMC" "Very Good" "Yes" "1999 Johnford VMC-1300 Fanuc OMC" "M0185" "0" "Yes"
8515 "MACHINING CENTERS, VERTICAL, CNC" "2002" "Johnford" "DMC-1500H" "Fanuc 18MC" "Good" "Yes" "2002 Johnford DMC-1500H Fanuc 18MC" "M0185" "0" "Yes"
7097 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Kia" "V-90" "Fanuc 18MC" "Very Good" "Yes" "2001 Kia V-90 Fanuc 18MC" "M0185" "0" "Yes"
7618 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Kingsbury" "VMC-600" "Fanuc 15iM" "Good" "Yes" "2001 Kingsbury VMC-600 Fanuc 15iM" "M0185" "0" "Yes"
8189 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Kitamura" "Bridge Center 8" "Fanuc 15M" "Good" "Yes" "98.4"" x 35.4"" Table, 80"" x 42.7"" x 26"" Travels, 6,000 RPM, 50 Taper, 30 HP, 30 ATC, High Speed Tapping Function, Glass Scales Feedback on All Axes, Twin Chip Augers and Chip Conveyor, RS-232 Port" "1998 Kitamura Bridge Center 8 Fanuc 15M" "M0185" "0" "Yes"
7619 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Kitamura" "Mycenter-7X / 50" "Yasnac I80" "Good" "Yes" "1998 Kitamura Mycenter-7X / 50 Yasnac I80" "M0185" "0" "Yes"
7446 "MACHINING CENTERS, VERTICAL, CNC" "1993" "Komo" "VMC-144" "Fanuc OMC" "Very Good" "Yes" "144"" x 20"" Table, 144"" x 20"" x 16"" Travels, 10,000 RPM, 40 Taper, 10 HP, 30 ATC, Macro-B, RS-232 Port, Expanded Memory 1,000'" "1993 Komo VMC-144 Fanuc OMC" "M0185" "0" "Yes"
7971 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Komo" "VMC-144" "fanuc 18iM" "Yes" "1999 Komo VMC-144 fanuc 18iM" "M0185" "0" "Yes"
8582 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Leadwell" "V-60" "Fanuc 21MB" "Very Good" "Yes" "66"" x 29.52"" Table, 59.8"" x 29.9"" x 24"" Travels, 8,000 RPM, 20 HP, 40 Taper, 24 ATC, Rigid Tapping, Many Extras" "1998 Leadwell V-60 Fanuc 21MB" "M0185" "0" "Yes"
7458 "MACHINING CENTERS, VERTICAL, CNC" "1994" "Leadwell" "VMC-25" "Mitsubishi Meldas 310M" "Good" "Yes" "1994 Leadwell VMC-25 Mitsubishi Meldas 310M" "M0185" "-1" "Yes"
7154 "MACHINING CENTERS, VERTICAL, CNC" "1987" "Leadwell" "MCV-1300D" "Fanuc OMB" "Good" "Yes" "1987 Leadwell MCV-1300D Fanuc OMB" "M0185" "0" "No"
6876 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Leadwell" "MCV-1000" "Fanuc OM" "Good" "Yes" "1989 Leadwell MCV-1000 Fanuc OM" "M0185" "0" "Yes"
7545 "MACHINING CENTERS, VERTICAL, CNC" "1986" "Leadwell" "MCV-550E" "Mitsubishi Meldas MO" "Good" "Yes" "1986 Leadwell MCV-550E Mitsubishi Meldas MO" "M0185" "0" "Yes"
7005 "MACHINING CENTERS, VERTICAL, CNC" "1994" "Makino" "RMC-55" "Fanuc OM" "Very Good" "Yes" "1994 Makino RMC-55 Fanuc OM" "M0185" "-1" "Yes"
7675 "MACHINING CENTERS, VERTICAL, CNC" "1983/93" "Mandelli" "Regent H-1502" "Fanuc 15MA" "Very Good" "Yes" "1983/93 Mandelli Regent H-1502 Fanuc 15MA" "M0185" "0" "Yes"
7661 "MACHINING CENTERS, VERTICAL, CNC" "1979" "Matsuura" "MC-500V" "Yasnac 3000G" "Needs Repair" "Yes" "1979 Matsuura MC-500V Yasnac 3000G" "M0185" "-1" "Yes"
8013 "MACHINING CENTERS, VERTICAL, CNC" "1986" "Matsuura" "MC-800V" "Yasnac MX-2" "Good" "Yes" "1986 Matsuura MC-800V Yasnac MX-2" "M0185" "-1" "Yes"
7884 "MACHINING CENTERS, VERTICAL, CNC" "1987" "Mazak" "AJV-25/404" "Mazatrol M-32" "Yes" "48.81"" x 21.65"" Table, 39.37"" x 19.68"" x 18.11"" Travels, 4,000 RPM, 20 HP, 40 Taper, 30 ATC, Color Graphics, EIA Programming, Chip Conveyor" "1987 Mazak AJV-25/404 Mazatrol M-32" "M0185" "-1" "On Way"
8364 "MACHINING CENTERS, VERTICAL, CNC" "2001" "Mazak" "VTC-200B" "Mazatrol Fusion 640M" "Good" "Yes" "2001 Mazak VTC-200B Mazatrol Fusion 640M" "M0185" "0" "Yes"
7400 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Mazak" "VTC-16B" "Mazatrol M-Plus" "Good" "Yes" "57.5"" x 16.1""Table, 44"" x 16"" x 20"" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, Conversational Programming, Graphic Display, Auto Tool Length Measurement, 4th Axis Interface, Coolant Through Spindle, 8"" Indexer, Rigid Tapping" "1997 Mazak VTC-16B Mazatrol M-Plus" "M0185" "-1" "Yes"
8087 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Mazak" "VQC-30/50B" "Mazatrol M-2" "Good" "Yes" "1989 Mazak VQC-30/50B Mazatrol M-2" "M0185" "-1" "Yes"
8092 "MACHINING CENTERS, VERTICAL, CNC" "1985" "Mazak" "VQC-20/40B" "Mazatrol M-2" "Good" "Yes" "1985 Mazak VQC-20/40B Mazatrol M-2" "M0185" "-1" "Yes"
8363 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Mazak" "VTC-200B" "Mazatrol Fusion 640M" "Very Good" "Yes" "1999 Mazak VTC-200B Mazatrol Fusion 640M" "M0185" "0" "Yes"
8091 "MACHINING CENTERS, VERTICAL, CNC" "1986" "Mazak" "VQC-20/40B" "Mazatrol M-2" "Good" "Yes" "1986 Mazak VQC-20/40B Mazatrol M-2" "M0185" "-1" "Yes"
7968 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Mazak" "VTC-20BX" "Mazatrol M-Plus" "Very Good" "Yes" "1998 Mazak VTC-20BX Mazatrol M-Plus" "M0185" "0" "Yes"
7525 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Mazak" "VTC-20B" "Mazatrol M-32B" "Very Good" "Yes" "1995 Mazak VTC-20B Mazatrol M-32B" "M0185" "0" "Yes"
7967 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Mazak" "VTC-16B" "Mazatrol M-Plus" "Good" "Yes" "1997 Mazak VTC-16B Mazatrol M-Plus" "M0185" "0" "Yes"
7962 "MACHINING CENTERS, VERTICAL, CNC" "2003" "Mazak" "Nexus VCN-510C" "Mazatrol Fusion 640 M" "Good" "No" "2003 Mazak Nexus VCN-510C Mazatrol Fusion 640 M" "M0185" "0" "Yes"
8595 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Mazak" "Nexus VCN-510C" "Mazatrol Fusion 640 M" "Very Good" "Yes" "51.1"" x 21.6"" Table, 41.3"" x 20"" x 20"" Travels, 12,000 RPM, 35 HP, 40 Taper, 30 ATC, Adaptive Feedrate Control, Extra Memory, Chip Conveyor, 4th Axis Interface, Rigid Tapping, EIA / ISO Functions, Helical Interpolation, High Pressure Coolant Through Spindle, Tool Breakage Detection, Die Mold Package, 8"" Mazak Rotary Table, Very Low Hours" "2006 Mazak Nexus VCN-510C Mazatrol Fusion 640 M" "M0185" "-1" "Yes"
7401 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Mazak" "VTC-16B" "Mazatrol Fusion 640 M" "Good" "Yes" "57.5"" x 16.1""Table, 44"" x 16"" x 20"" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping, New Spindle in 2005" "1998 Mazak VTC-16B Mazatrol Fusion 640 M" "M0185" "-1" "Yes"
8362 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Mazak" "Nexus VCN-510C" "Mazatrol Fusion 640 M" "Very Good" "Yes" "2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M" "M0185" "0" "Yes"
7586 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Mazak" "AJV-32/405" "Mazatrol M-2" "Good" "Yes" "48.8"" x 25.6"" Table, 39.3"" x 20"" x 18.1"" Travels, 5,000 RPM, 25 HP, 50 Taper, 30 ATC" "1989 Mazak AJV-32/405 Mazatrol M-2" "M0185" "-1" "No"
8371 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Mazak" "VTC-20B" "Mazatrol M-32B" "Very Good" "Yes" "1996 Mazak VTC-20B Mazatrol M-32B" "M0185" "0" "Yes"
8373 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Mazak" "VTC-200B" "Mazatrol Fusion 640M" "Very Good" "Yes" "1999 Mazak VTC-200B Mazatrol Fusion 640M" "M0185" "0" "Yes"
8374 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Mazak" "VTC-200B" "Mazatrol Fusion 640M" "Very Good" "Yes" "2000 Mazak VTC-200B Mazatrol Fusion 640M" "M0185" "0" "Yes"
8594 "MACHINING CENTERS, VERTICAL, CNC" "2006" "Mazak" "Nexus VCN-510C" "Mazatrol Fusion 640 M" "Very Good" "Yes" "2006 Mazak Nexus VCN-510C Mazatrol Fusion 640 M" "M0185" "0" "Yes"
8093 "MACHINING CENTERS, VERTICAL, CNC" "1985" "Mazak" "VQC-20/40B" "Mazatrol M-2" "Good" "Yes" "1985 Mazak VQC-20/40B Mazatrol M-2" "M0185" "-1" "Yes"
8366 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Mazak" "Nexus VCN-510C" "Mazatrol Fusion 640 M" "Very Good" "Yes" "2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M" "M0185" "0" "Yes"
8084 "MACHINING CENTERS, VERTICAL, CNC" "1986" "Mazak" "VQC-20/50B" "Mazatrol M-2" "Good" "Yes" "1986 Mazak VQC-20/50B Mazatrol M-2" "M0185" "-1" "Yes"
7505 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Mazak" "VTC-160A" "Mazatrol Fusion 640 MPC" "Very Good" "Yes" "2000 Mazak VTC-160A Mazatrol Fusion 640 MPC" "M0185" "0" "Yes"
7535 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Mazak" "AJV-25/405" "Mazatrol M-2" "Good" "Yes" "48"" X 22"" Table, 39.3"" x 20"" x 20"" Travels, 3,150 RPM, 25 HP, 50 Taper, 30 ATC" "1989 Mazak AJV-25/405 Mazatrol M-2" "M0185" "-1" "Yes"
7623 "MACHINING CENTERS, VERTICAL, CNC" "1995" "Mazak" "VTC-16C" "Mazatrol M-32" "Very Good" "Yes" "1995 Mazak VTC-16C Mazatrol M-32" "M0185" "0" "Yes"
7945 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Mazak" "AJV-35/80" "Mazatrol M-32" "Good" "Yes" "1989 Mazak AJV-35/80 Mazatrol M-32" "M0185" "-1" "Yes"
7643 "MACHINING CENTERS, VERTICAL, CNC" "2004" "Mazak" "V-815/80" "Mazatrol Fusion 640 Pro" "Very Good" "Yes" "2004 Mazak V-815/80 Mazatrol Fusion 640 Pro" "M0185" "0" "Yes"
8086 "MACHINING CENTERS, VERTICAL, CNC" "1989" "Mazak" "VQC-30/50B" "Mazatrol M-2" "Good" "Yes" "1989 Mazak VQC-30/50B Mazatrol M-2" "M0185" "-1" "Yes"
7536 "MACHINING CENTERS, VERTICAL, CNC" "1983" "Mazak" "VQC-20/50B" "Mazatrol M-2" "Good" "Yes" "21.6"" x 48.8"" Table, 39.37"" x 20"" x 18.11"" Travels, 3,150 RPM, 12 HP, 15 ATC, Color Graphics, Many Extras, Low Hours" "1983 Mazak VQC-20/50B Mazatrol M-2" "M0185" "-1" "Yes"
7834 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Mighty" "Viper VMC-950" "Mitsubishi Magic 640" "Very Good" "Yes" "50"" x 18"" Table, 40"" x 20"" x 24.8"" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System, Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely Rebuilt By Mitsubishi March 2005" "1999 Mighty Viper VMC-950 Mitsubishi Magic 640" "M0185" "-1" "Yes"
8258 "MACHINING CENTERS, VERTICAL, CNC" "2005" "Mikron" "HSM 800" "Heidenhain iTNC530" "Very Good" "Yes" "2005 Mikron HSM 800 Heidenhain iTNC530" "M0185" "0" "No"
8025 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Milltronics" "VMD-30B" "Centurion IV" "Good" "Yes" "1997 Milltronics VMD-30B Centurion IV" "M0185" "0" "Yes"
6959 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Milltronics" "VM-30B" "Centurion 6" "Very Good" "Yes" "1998 Milltronics VM-30B Centurion 6" "M0185" "0" "Yes"
8216 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Milltronics" "VM-16" "Centurion 6" "Good" "Yes" "45"" x 16"" Table, 30"" x 16.5"" x 19.5"" Travels, 6,000 RPM, 40 Taper, 7.5 HP, 12 ATC, 600 IPM Rapids, Conversational Programming, Colum Raised 6"" By Factory, High Speed DNC Option, Rigid Tapping, Factory Retrofit Way Covers, Updated Centurion 6 Control" "1996 Milltronics VM-16 Centurion 6" "M0185" "-1" "Yes"
7965 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Mitsubishi" "V-360" "Mitsubishi 520M" "Good" "Yes" "1997 Mitsubishi V-360 Mitsubishi 520M" "M0185" "-1" "Yes"
7106 "MACHINING CENTERS, VERTICAL, CNC" "1981" "Monarch" "VMC-75" "Bendix 5CM" "Good" "Yes" "1981 Monarch VMC-75 Bendix 5CM" "M0185" "-1" "Yes"
7995 "MACHINING CENTERS, VERTICAL, CNC" "1993" "Mori-Seiki" "MV-40" "Yasnac I80" "Very Good" "Yes" "35.3"" x 18"" Table, 22"" x 16.15"" x 18.12"" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours" "1993 Mori-Seiki MV-40 Yasnac I80" "M0185" "-1" "Yes"
8206 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Mori-Seiki" "SV-500B/40" "Fanuc 18iA" "Very Good" "Yes" "43.31"" x 23.62"" Table, 31.5"" x 20.08"" x 20.08"" Travels, 10,000 RPM, 22 HP, 30 ATC, Prepped For Coolant Through Spindle, Rigid Tapping, Helical Interpolation, Turbo Chip Conveyor, Approximately 5,000 Cutting Hours" "1998 Mori-Seiki SV-500B/40 Fanuc 18iA" "M0185" "0" "Yes"
5439 "MACHINING CENTERS, VERTICAL, CNC" "1997" "OKK" "TRC-500" "Fanuc 16M" "Very Good" "Yes" "43.31"" x 20.47"" Table, 32.28"" x 20.47"" x 16.14"" Travels, 12,000 RPM, 40 Taper, 5 HP, 7ATC, Graphite Machining Capability, Full Enclosure With Top Cover, Renshaw MP9 Probe, Torit Dust Collector System, Remote Jog Handle, Only 5,000 Running Hours" "1997 OKK TRC-500 Fanuc 16M" "M0185" "-1" "Yes"
8570 "MACHINING CENTERS, VERTICAL, CNC" "1990" "Okuma" "MCV-A" "OSP-5020M" "Good" "Yes" "86.61"" x 49.21"" Pallets, 78.74"" x 62.99"" x 39.4"" Travels, 3,600 RPM, 30 HP, 100 ATC, Factory Installed Pallet Changer, IGF, Color Monitor" "1990 Okuma MCV-A OSP-5020M" "M0185" "0" "Yes"
6863 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Okuma" "MA-550VB" "OSP-U100M" "Very Good" "Yes" "2000 Okuma MA-550VB OSP-U100M" "M0185" "0" "Yes"
8463 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Okuma" "MX-45 VAE" "OSP-700M" "Good" "Yes" "1997 Okuma MX-45 VAE OSP-700M" "M0185" "0" "No"
6862 "MACHINING CENTERS, VERTICAL, CNC" "2000" "Okuma" "MX-55 VB" "OSP-U10M" "Very Good" "Yes" "2000 Okuma MX-55 VB OSP-U10M" "M0185" "0" "Yes"
8456 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Okuma" "MX-55 VB" "OSP-U10M" "Very Good" "Yes" "1999 Okuma MX-55 VB OSP-U10M" "M0185" "0" "Yes"
6711 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Okuma" "MX-45 VBE" "OSP-700M" "Good" "Yes" "1997 Okuma MX-45 VBE OSP-700M" "M0185" "0" "Yes"
8464 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Okuma" "MC-60 VAE" "OSP-700M" "Good" "Yes" "1996 Okuma MC-60 VAE OSP-700M" "M0185" "0" "Yes"
8517 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Okuma" "MX-45 VAE" "OSP-700M" "Good" "Yes" "1997 Okuma MX-45 VAE OSP-700M" "M0185" "0" "Yes"
8389 "MACHINING CENTERS, VERTICAL, CNC" "1985" "Ooya" "RE-1MVL" "Fanuc 6M" "Very Good" "Yes" "1985 Ooya RE-1MVL Fanuc 6M" "m0185" "0" "Yes"
8566 "MACHINING CENTERS, VERTICAL, CNC" "1987" "Ooya" "RE-1MVL" "Fanuc 6MB" "Good" "Yes" "1987 Ooya RE-1MVL Fanuc 6MB" "M0185" "0" "Yes"
8444 "MACHINING CENTERS, VERTICAL, CNC" "1982" "Ooya" "RE-1ML" "Fanuc 6MB" "Good" "Yes" "1982 Ooya RE-1ML Fanuc 6MB" "M0185" "0" "Yes"
7617 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Ooya" "VMC-2185" "Fanuc OMC" "Good" "Yes" "1996 Ooya VMC-2185 Fanuc OMC" "M0185" "0" "Yes"
8282 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Quantum" "Q-1500 V" "Quantum" "Very Good" "Yes" "1997 Quantum Q-1500 V Quantum" "M0185" "0" "Yes"
7954 "MACHINING CENTERS, VERTICAL, CNC" "1999" "Quantum" "Q-1250 V" "Fanuc 18M" "Very Good" "Yes" "1999 Quantum Q-1250 V Fanuc 18M" "M0185" "-1" "Yes"
6373 "MACHINING CENTERS, VERTICAL, CNC" "1990/05" "Rambaudi" "Rammatic 1400" "Siemens 802D" "Good" "Yes" "1990/05 Rambaudi Rammatic 1400 Siemens 802D" "M0185" "-1" "Yes"
8419 "MACHINING CENTERS, VERTICAL, CNC" "1998" "Republic Lagun" "VMC-3516" "Fanuc OMF" "Excellent" "Yes" "43.3"" x 23.6"" Table, 24"" x 16"" x 20 Travels, 5,000 RPM, 15 HP, 18 ATC, Two (2) Speed Geared Head, Coolant System, Remote Jog Handle, Under 1,000 Hours On Machine" "1998 Republic Lagun VMC-3516 Fanuc OMF" "M0185" "-1" "Yes"
7761 "MACHINING CENTERS, VERTICAL, CNC" "1997" "Sharnoa" "HPM-40" "Tiger 6" "Very Good" "Yes" "1997 Sharnoa HPM-40 Tiger 6" "M0185" "-1" "Yes"
7757 "MACHINING CENTERS, VERTICAL, CNC" "1990" "Sharnoa" "SV-36" "Tiger 5" "Very Good" "Yes" "1990 Sharnoa SV-36 Tiger 5" "M0185" "-1" "Yes"
7448 "MACHINING CENTERS, VERTICAL, CNC" "1996" "Shizuoka" "SV-4020" "Fanuc 16M" "Very Good" "Yes" "1996 Shizuoka SV-4020 Fanuc 16M" "M0185" "0" "Yes"
6896 "MACHINING CENTERS, VERTICAL, CNC" "1985" "Takisawa" "MAC-V4" "Fanuc 6MB" "Good" "Yes" "1985 Takisawa MAC-V4 Fanuc 6MB" "M0185" "0" "Yes"
7874 "MACHINING CENTERS, VERTICAL, CNC" "1993" "Tree" "VMC-1050" "Acramatic 2100" "Fair" "Yes" "1993 Tree VMC-1050 Acramatic 2100" "M0185" "-1" "Yes"
7434 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1999" "Daewoo" "DMV-400" "Mitsubishi 520M" "Very Good" "Yes" "1999 Daewoo DMV-400 Mitsubishi 520M" "M0185P" "0" "Yes"
8111 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2005" "Deckel-Maho" "DMU-100 U" "Heidenhain MillsPlus IT" "Very Good" "Yes" "2005 Deckel-Maho DMU-100 U Heidenhain MillsPlus IT" "M0185P" "0" "Yes"
7676 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1997" "Haas" "VF-3 APC" "Haas 32 BIT" "Very Good" "Yes" "1997 Haas VF-3 APC Haas 32 BIT" "M0185P" "0" "Yes"
7908 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2006" "Haas" "VF-4 SS APC" "Haas 32 BIT" "Excellent" "Yes" "2006 Haas VF-4 SS APC Haas 32 BIT" "M0185P" "0" "Yes"
8476 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2002" "Haas" "VF-3 APC" "Haas 32 BIT" "Very Good" "Yes" "2002 Haas VF-3 APC Haas 32 BIT" "M0185P" "0" "Yes"
8481 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2004" "Haas" "VF-3 APC" "Haas 32 BIT" "Very Good" "Yes" "2004 Haas VF-3 APC Haas 32 BIT" "M0185P" "0" "Yes"
8480 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2000" "Haas" "VF-3 APC" "Haas 32 BIT" "Good" "Yes" "2000 Haas VF-3 APC Haas 32 BIT" "M0185P" "0" "Yes"
8402 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1999" "Haas" "VF-4" "Haas 32 BIT" "VeryGood" "Yes" "1999 Haas VF-4 Haas 32 BIT" "M0185P" "0" "Yes"
8457 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2006" "Haas" "VF-2 SS" "Haas 32 BIT" "Very Good" "Yes" "2006 Haas VF-2 SS Haas 32 BIT" "M0185P" "-1" "Yes"
8351 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2004" "Haas" "VF-3 APC" "Haas 32 BIT" "Very Good" "Yes" "40"" x 19"" Pallets, 40"" x 20"" x 25"" Travels, 15,000 RPM, 40 Taper, 20 HP, 20 ATC, 1,000 IPM, 4th Axis Interface, Chip Auger, 3.5"" Floppy Drive, Programmable Coolant, Spindle Orientation, 1 Meg of Memory, Quick Code Programming, Eighty (80) Gallon Coolant Tank, Remote Jog Handle, Coolant Filtration System, Coolant Through Spindle (300 psi)" "2004 Haas VF-3 APC Haas 32 BIT" "M0185P" "0" "Yes"
6989 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1996" "Kitamura" "Mycenter-1 APC" "Fanuc OM" "Good" "Yes" "1996 Kitamura Mycenter-1 APC Fanuc OM" "M0185P" "0" "Yes"
8486 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1998" "Makino" "SNC-106 A30" "Fanuc Pro 3" "Very Good" "Yes" "1998 Makino SNC-106 A30 Fanuc Pro 3" "M0185P" "0" "Yes"
7278 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2005" "Mazak" "V-815/120" "Mazatrol Fusion 640 MT" "Very Good" "Yes" "2005 Mazak V-815/120 Mazatrol Fusion 640 MT" "M0185P" "-1" "Yes"
8257 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2006" "Mikron" "HSM 600U" "Heidenhain iTNC530" "Very Good" "Yes" "2006 Mikron HSM 600U Heidenhain iTNC530" "M0185P" "0" "No"
6052 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1996" "Mitsubishi" "MPA-V65" "Mitsubishi M-NAP-II" "Fair" "Yes" "65"" x 26"" - Table, 55"" x 22"" Pallets (2), 49"" x 26"" x 26"" Travels, 4,000 RPM, 50 Taper, 20 HP, 40 ATC, Geared Head, Remote Jog Handle, Appears to Have Induction Block and Plumbing For Coolant Through Spindle" "1996 Mitsubishi MPA-V65 Mitsubishi M-NAP-II" "M0185P" "-1" "Yes"
7074 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1995" "Monarch" "VMC-75B" "Fanuc 15MB" "Good" "Yes" "49"" x 21"" Table, 40"" x 20"" x 24"" Travels, 6,000 RPM, 20 HP, 26 ATC, Coolant Through Spindle, Probing, Heidenhain Scales" "1995 Monarch VMC-75B Fanuc 15MB" "M0185P" "0" "Yes"
7071 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1995" "Monarch" "VMC-45B" "Fanuc 16M" "Good" "Yes" "1995 Monarch VMC-45B Fanuc 16M" "M0185P" "0" "Yes"
6516 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2000" "Mori-Seiki" "GV-503A" "Mitsubishi MSC-805" "Very Good" "Yes" "Two - 29.5"" x 21.7"" Pallets, 24"" x 20"" x 18.1"" Travels, 12,000 RPM, 40 Taper, 20 HP, 30 ATC, 1,654 Rapids, Automatic Pallet Changer, Shower Coolant System, Turbo Fine Chip Conveyor, User Macro B, Tool Length Measument (laser), Tool Life Management, Two (2) Separate Rotary Tables, Plumbed For Coolant Through Spindle" "2000 Mori-Seiki GV-503A Mitsubishi MSC-805" "M0185P" "-1" "Yes"
8022 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "1997" "OKK" "MCV-660" "Fanuc 16M" "Good" "Yes" "1997 OKK MCV-660 Fanuc 16M" "M0185P" "0" "Yes"
7796 "MACHINING CENTERS, VERTICAL, CNC W-PALLETS" "2001" "Supermax" "FV-56A" "Fanuc 18M" "Very Good" "Yes" "2001 Supermax FV-56A Fanuc 18M" "M0185P" "0" "Yes"
5647 "MILLERS, FLUTE" "1966" "Bohle" "FUP-100" "Good" "Yes" "1966 Bohle FUP-100 " "M1565" "-1" "Yes"
6432 "MILLERS, HYDROTEL-VERT" "1964" "Cincinnati" "Hydrotel 28"" x 60""" "Good" "No" "97"" x 28"" Table, 60"" x 28"" x 24"" Travels, 1,100 RPM, 20 HP, 50 Taper, 360 Tracer, Converted to 180, Power Down Feed, Coolant System" "1964 Cincinnati Hydrotel 28"" x 60"" " "M1725" "-1" "Yes"
7205 "MILLERS, PLANER TYPE (Including Millers, Slab)" "1953" "Rockford" "120"" x 36"" x 24""" "Good" "No" "120"" x 24"" Table, 120"" x 24"" x 36"" Travels, 30 HP, Power Elevation" "1953 Rockford 120"" x 36"" x 24"" " "M2050" "0" "Yes"
8115 "MILLERS, PLANER TYPE, BRIDGE STYLE" "1965" "Gray-Futurmill" "38"" x 360""" "Good" "Yes" "1965 Gray-Futurmill 38"" x 360"" " "M2050B" "0" "Yes"
8112 "MILLERS, PLANER TYPE, BRIDGE STYLE" "1968" "Gray-Futurmill" "64"" x 288""" "Very Good" "Yes" "1968 Gray-Futurmill 64"" x 288"" " "M2050B" "0" "Yes"
7916 "MILLERS, UNIVERSAL" "1988" "Alliant" "1 1/2 TMV" "Good" "Yes" "42"" x 9"" Table, 30"" x 12 3/4' x 17"" Travels, 70 -4,200 RPM, 3 HP" "1988 Alliant 1 1/2 TMV " "M2680" "-1" "On Way"
7409 "MILLERS, UNIVERSAL" "1987" "Bridgeport" "Series I" "Very Good" "Yes" "1987 Bridgeport Series I " "M2680" "0" "Yes"
5758 "MILLERS, UNIVERSAL" "1982" "Bridgeport" "Series I" "Fair" "Yes" "1982 Bridgeport Series I " "M2680" "-1" "Yes"
7408 "MILLERS, UNIVERSAL" "1998" "Bridgeport" "Series I" "Excellent" "Yes" "1998 Bridgeport Series I " "M2680" "0" "Yes"
8031 "MILLERS, VERT. and HORIZ., NC and CNC" "2006" "Deckel-Maho" "DMU-125P" "Siemens 840D" "Excellent" "Yes" "49.2"" x 34.7"" x 31.5"" Travels, 50 Taper, 60 ATC, 21 HP, 12,000 RPM, Full B-Axis, Tilt/Swivel Rotary, Chip, Like New Cond." "2006 Deckel-Maho DMU-125P Siemens 840D" "M2836" "0" "Yes"
7781 "MILLERS, VERTICAL" "OKK" "MH-2V" " OKK MH-2V " "M2824" "0"
7658 "MILLERS, VERT-UNIVERSAL NC and CNC" "1996" "Bridgeport" "V2XT" "Bridgeport DX-32" "Good" "Yes" "1996 Bridgeport V2XT Bridgeport DX-32" "M2833" "0" "Yes"
7107 "MILLERS, VERT-UNIVERSAL NC and CNC" "1980" "Bridgeport" "Series II Ez-Trak" "Bridgeport Boss" "Good" "Yes" "38"" x 15"" Table, 35"" x 15"" x 5"" x 13"" Travels, 4,200 RPM, 4 HP, 40 Taper, Two (2) Axis BOSS Control, Bridgeport Spindle Wizard on Quill Feed, Quick Change 40 Taper Spindle, Three (3) Axis Manual Readout For Manual Operation, Coolant System, Air Lift on Knee" "1980 Bridgeport Series II Ez-Trak Bridgeport Boss" "M2833" "-1" "Yes"
7893 "MILLERS, VERT-UNIVERSAL NC and CNC" "1998" "Clausing-Kondia" "FV-1" "Proto Trak MX-2" "Good" "Yes" "48"" x 9"" Table, 32"" x 12"" x 5"" x 15"" Travels, 4,200 RPM, 3 HP, 30 Taper, Coolant System, Conversational Control, M, S & G Codes, Canned Cycles, Two (2) Axis CNC Control, Three (3) Axis DRO's, Kurt Power Drawbar" "1998 Clausing-Kondia FV-1 Proto Trak MX-2" "M2833" "-1" "Yes"
7646 "MILLERS, VERT-UNIVERSAL NC and CNC" "2004" "Fryer" "MB-15" "Anilam 3000" "Good" "Yes" "2004 Fryer MB-15 Anilam 3000" "M2833" "0" "Yes"
7647 "MILLERS, VERT-UNIVERSAL NC and CNC" "1996" "Fryer" "MB-12" "Centurion I" "Good" "Yes" "1996 Fryer MB-12 Centurion I" "M2833" "0" "Yes"
8330 "MILLERS, VERT-UNIVERSAL NC and CNC" "2000" "H.H. Roberts" "TW-31 Q" "Anilam 5300 MK" "Very Good" "Yes" "43"" x 13"" Table, 31"" x 20"" x 20"" x 5"" Travels, 6,000 RPM, 40 Taper, 5 HP, Coolant System, Canned Cycles" "2000 H.H. Roberts TW-31 Q Anilam 5300 MK" "M2833" "0" "Yes"
8045 "MILLERS, VERT-UNIVERSAL NC and CNC" "2002" "Hurco" "Hawk 5" "Ultramax III/Dual CRT" "Yes" "2002 Hurco Hawk 5 Ultramax III/Dual CRT" "M2833" "0"
7833 "MILLERS, VERT-UNIVERSAL NC and CNC" "2004" "Milltronics" "MB-19" "Centurion 6 SLS" "Very Good" "Yes" "2004 Milltronics MB-19 Centurion 6 SLS" "M2833" "0" "Yes"
7657 "MILLERS, VERT-UNIVERSAL NC and CNC" "1999" "Trak" "DPM" "Trak A.G.E. 3 CNC" "Good" "Yes" "1999 Trak DPM Trak A.G.E. 3 CNC" "M2833" "0" "No"
7853 "MILLERS, VERT-UNIVERSAL NC and CNC" "1985" "Tree" "Journeyman 325" "Delta Dynapath 20M/CRT" "Good" "Yes" "44"" x 10"" Table, 27"" x 14"" x 6"" x 15.75"" Travels, 6,000 RPM, 5 HP, 40 Taper, 4th Axis Rotary Table" "1985 Tree Journeyman 325 Delta Dynapath 20M/CRT" "M2833" "-1" "Yes"
6126 "MILLERS, VERT-UNIVERSAL NC and CNC" "1988" "Webb" "Webbmatic 800" "Delta Dynapath 10M" "Good" "Yes" "1988 Webb Webbmatic 800 Delta Dynapath 10M" "M2833" "-1" "Yes"
6508 "MILLERS, VERT-UNIVERSAL NC and CNC" "1988" "Webb" "Webbmatic 800" "Delta Dynapath 10M" "Good" "Yes" "1988 Webb Webbmatic 800 Delta Dynapath 10M" "M2833" "-1" "Yes"
6056 "MISCELLANEOUS COMPONENTS" "2006" "Carr Lane" "Zero-Point Mounting System" "2006 Carr Lane Zero-Point Mounting System " "MISC" "-1"
6054 "MISCELLANEOUS COMPONENTS" "2006" "Renishaw" "MP-700" "Like New" "NA" "2006 Renishaw MP-700 " "MISC" "-1" "On Way"
8250 "MISCELLANEOUS COMPONENTS" "2004" "Renishaw" "MP-10" "Like New" "Yes" "Infra-Red Optical Transmission - 360, Sense Directions - Omni-Directional, Trigger Force - 4.20 N (420 gf), Taper - 40 Taper, Manuals, Came Off a Haas VF-3 and Very Little Use" "2004 Renishaw MP-10 " "MISC" "0" "Yes"
5336 "MISCELLANEOUS COMPONENTS" "1962" "Stocker and Yale" "11 MDA-210" "Excellent" "Yes" "Stocker & Yale 11 MDA-210" "1962 Stocker and Yale 11 MDA-210 " "MISC" "-1" "Yes"
8618 "MIXERS, LIQUID" "1988" "De Dietrich" "Mixer" "Good" "Yes" "1988 De Dietrich Mixer " "M3249" "-1" "Yes"
6847 "PRESSES, HYDRAULIC" "2001" "Janox" "20 Ton" "Very Good" "Yes" "2001 Janox 20 Ton " "P5102" "-1" "Yes"
7726 "PRESSES, HYDRAULIC" "--Select Mfg Here--" "Very Good" "Yes" "75 Tons, 55"" x 55"" Bed, 44"" x 44"" Between Posts, 40"" Stroke, 50"" Daylight, Down Acting Design, Top Mounted Hydraulics, Tonnage Gauge, High Speed Operation" " --Select Mfg Here-- " "P5102" "-1" "Yes"
7167 "PRESSES, O.B.I., FLYWHEEL, DOUBLE CRANK" "1971" "Bliss" "200 Ton" "Good" "Yes" "200 Tons, 58"" x 35"" Bed, 38"" x 28"" Ram, 26"" Shut Height, 8"" Stroke, 40 SPM, 4.5"" Ram Adjustment, 20 HP, Air Clutch and Brake, Power Ram Adjustement, Dual Air Counter Balance, Standard Bliss Cushion, 5"" Bolster Plate" "1971 Bliss 200 Ton " "P6200" "-1" "Yes"
8309 "PRESSES, O.B.I., FLYWHEEL, DOUBLE CRANK" "1972/88" "Bliss" "Model S1-150-27-33" "Very Good" "Yes" "1972/88 Bliss Model S1-150-27-33 " "P6200" "0" "Yes"
6676 "PRESSES, O.B.I., FLYWHEEL, DOUBLE CRANK" "1963" "L and J" "60 Ton" "Very Good" "Yes" "60 Tons, 30"" x 18"" Bed, 12.75"" Shut Height, 2"" Stoke, 20 HP, Air Brake, Air Clutch, Touch Sreen Control, Wintriss Die Pro Sensor, Light Curtains" "1963 L and J 60 Ton " "P6200" "-1" "Yes"
8370 "PRESSES, SSDC" "1968" "Verson" "OBG" "Very Good" "Yes" "1968 Verson OBG " "P7135" "0" "Yes"
8368 "PRESSES, SSDC" "1984" "Verson" "150-B2-60" "Very Good" "Yes" "1984 Verson 150-B2-60 " "P7135" "0" "Yes"
5203 "PRESSES, STAMPING" "2000" "Bihler" "MC-120" "Very Good" "Yes" "Stroke Rate - 5 - 150 CPM, Nominal Punching Capacity 600 kN, Stoke 0.866"", Nominal Forming Capacity 120 kN, Stroke 3.937"", Longitudinal Feed Pitch Maximum 13.7795"", Transverse Feed Pitch Maximum 5.9055"", Material Maximum Strip Width x Length 6.2992"" x 12.5984""" "2000 Bihler MC-120 " "P7050" "-1" "Yes"
8367 "PRESSES, STRAIGHT SIDE, CRANKLESS" "1966" "Miller" "C-150" "Very Good" "Yes" "1966 Miller C-150 " "P7125" "0" "Yes"
7239 "PUNCHES, PUNCHES and SHEARS" "1952" "Buffalo" "46P" "Good" "Yes" "105 Ton, 10"" Throat, 1 1/4"" in 3/4"" Punch, 5"" x 5"" x 1/2"" Angles 90, 16"" x 3/4"" Flat Bar, 17 SPM, Automatic Electric Contact Length Stop, 39"" With Scales, Standard Tooling" "1952 Buffalo 46P " "P9098" "-1" "Yes"
6702 "PUNCHES, TURRET, NC and CNC" "1991" "Wiedemann" "C-3000" "Fanuc OPB" "Good" "Yes" "1991 Wiedemann C-3000 Fanuc OPB" "P9295" "0" "Yes"
6337 "ROLLS, ANGLE BENDING" "2004" "Akyapak" "APK-100" "Very Good" "Yes" "2004 Akyapak APK-100 " "R4704" "0" "No"
7642 "ROLLS, ANGLE BENDING" "1987" "Buffalo" "2-1/2 HBR" "Good" "Yes" "1987 Buffalo 2-1/2 HBR " "R4704" "0" "Yes"
7295 "ROLLS, ANGLE BENDING" "1950" "Buffalo" "3H" "Good" "Yes" "1950 Buffalo 3H " "R4704" "0" "Yes"
8046 "ROLLS, ANGLE BENDING" "1972" "Buffalo" "2 BR" "Good" "Yes" "1972 Buffalo 2 BR " "R4704" "0" "Yes"
6349 "ROLLS, ANGLE BENDING" "2008" "Cole-Tuve" "ARS-4" "New" "No" "2008 Cole-Tuve ARS-4 " "R4704" "0" "No"
8021 "ROLLS, ANGLE BENDING" "1994" "Montgomery" "Model 44" "Very Good" "Yes" "1994 Montgomery Model 44 " "R4704" "0" "Yes"
7264 "ROLLS, ANGLE BENDING" "1970" "Roundo" "R-3" "Good" "Yes" "1970 Roundo R-3 " "R4704" "0" "Yes"
7102 "ROLLS, ANGLE BENDING" "1996" "Roundo" "R-13-S" "Very Good" "Yes" "Angle Bend Capacity - 8"" x 8"" x 1 - 1/4"", Diameter of Bending Rolls 32"", 108 HP, Large Selection of Dies For Pipe and Beams, Large Selection of Spacers, Oversized Shaft, Motors & Drive, Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full Pendant Control, Five (5) Sets of Pipe Rolls" "1996 Roundo R-13-S " "R4704" "-1" "Yes"
8012 "ROLLS, ANGLE BENDING" "1992" "Roundo" "R-4S" "Very Good" "Yes" "1992 Roundo R-4S " "R4704" "0" "Yes"
7681 "ROLLS, ANGLE BENDING" "1995" "Tauring" "Alfa 50" "Good" "Yes" "1995 Tauring Alfa 50 " "R4704" "-1" "Yes"
7789 "ROLLS, PLATE BENDING, INITIAL PINCH" "1963" "Bertsch" "Model 8" "Very Good" "Yes" "1963 Bertsch Model 8 " "R5603" "0" "Yes"
7963 "ROLLS, PLATE BENDING, INITIAL PINCH" "1966" "Bertsch" "Model 14" "Good" "Yes" "1966 Bertsch Model 14 " "R5603" "0" "Yes"
4782 "SAWS, PANEL, CNC" "1999" "Holzma" "HPP-23" "Very Good" "Yes" "1999 Holzma HPP-23 " "S1118" "0" "Yes"
7026 "SAWS, PANEL, CNC" "1987" "Holzma" "EL-130 1600DL" "Holzma Digimatic" "Very Good" "Yes" "1987 Holzma EL-130 1600DL Holzma Digimatic" "S1118" "-1" "Yes"
5854 "SAWS, SLAB" "1996" "Mossner" "Fanuc 18M" "Yes" "1996 Mossner Fanuc 18M" "S1298" "0" "On Way"
7461 "SHEARS, CIRCLE" "1986" "Blue Valley" "40B-386" "Very Good" "Yes" "1986 Blue Valley 40B-386 " "S3708" "0" "Yes"
7516 "SHEARS, CIRCLE" "Blue Valley" "60-261" "Good" "Yes" " Blue Valley 60-261 " "S3708" "0" "Yes"
7445 "SHEARS, CIRCLE" "By George" "Model CH 7257" "Good" "Yes" " By George Model CH 7257 " "S3708" "0" "Yes"
6780 "SHEARS, HYDRAULIC" "1978" "Cincinnati" "5FL12" "Good" "Yes" "1978 Cincinnati 5FL12 " "S4105H" "0" "Yes"
6791 "SHEARS, HYDRAULIC" "1977" "Cincinnati" "2H10" "Very Good" "Yes" "1977 Cincinnati 2H10 " "S4105H" "0" "Yes"
5211 "SHEARS, HYDRAULIC" "1981" "HTC" "12' x 3/8""" "Good" "No" "12' x 3/8"" Capacity, 36"" Front Operated Backgauge, 12' Squaring Arm, Four (4) Sided Blades, Independent Hydraulic Holddowns, Two (2) 36"" Front Sheet Supports, Finger Guards" "1981 HTC 12' x 3/8"" " "S4105H" "-1" "Yes"
6804 "SHEARS, HYDRAULIC" "1981" "HTC" "750-12R" "Good" "No" "1981 HTC 750-12R " "S4105H" "0" "No"
6793 "SHEARS, HYDRAULIC" "2007" "Krras" "RAS 306" "New" "Yes" "2007 Krras RAS 306 " "S4105H" "0" "No"
6787 "SHEARS, HYDRAULIC" "2007" "Krras" "RAS 3013" "New" "Yes" "2007 Krras RAS 3013 " "S4105H" "0" "Yes"
6792 "SHEARS, HYDRAULIC" "1984" "Wysong" "1025" "Very Good" "Yes" "1984 Wysong 1025 " "S4105H" "0" "Yes"
8047 "SLOTTERS, VERTICAL (Including Vertical Shapers)" "1952" "Rockford" "36"" Vertical Slotter" "Very Good" "Yes" "42"" Rotary Table, 16"" Removable Center, 7"" - 38"" Stroke, 52"" Distance Under Tool, 20 HP, 36"" x 42"" Travels, 42"" Indexing Rotary Table, Tilting Ram Guide, Pendent Control" "1952 Rockford 36"" Vertical Slotter " "S5748" "-1" "Yes"
6976 "SLOTTERS, VERTICAL (Including Vertical Shapers)" "1952" "Rockford" "36"" Vertical Slotter" "Good" "Yes" "42"" Rotary Table, 16"" Removable Center, 7"" - 38"" Stroke, 52"" Distance Under Tool, 20 HP, 36"" x 42"" Travels, 42"" Indexing Rotary Table, Tilting Ram Guide, Pendent Control" "1952 Rockford 36"" Vertical Slotter " "S5748" "-1" "Yes"
8272 "SMOKE COLLECTORS" "2002" "Aercology" "ETP 2600 DX2" "Good" "No" "2002 Aercology ETP 2600 DX2 " "S8300" "0" "Yes"
7431 "TABLES, NC and CNC" "1998" "Haas" "HRT-210" "Good" "No" "1998 Haas HRT-210 " "T0130" "0" "Yes"
8447 "TABLES, NC and CNC" "Haas" "HA-5C" "Good" "Yes" " Haas HA-5C " "T0130" "-1" "Yes"
7328 "TABLES, NC and CNC" "1999" "Haas" "T5C45XB" "Very Good" "No" "1999 Haas T5C45XB " "T0130" "0" "Yes"
7994 "TABLES, NC and CNC" "Haas" "HRT-310 & HRT-210" "Very Good" "Yes" " Haas HRT-310 & HRT-210 " "T0130" "-1" "Yes"
6758 "TABLES, NC and CNC" "1998" "Haas" "HA-5C" "Very Good" "Yes" "1998 Haas HA-5C " "T0130" "-1" "Yes"
7040 "TABLES, NC and CNC" "1999" "Haas" "HRT-310" "Good" "Yes" "12.2"" Round Table, Indexing 360,000, Brush Servo" "1999 Haas HRT-310 " "T0130" "-1" "Yes"
7324 "TABLES, NC and CNC" "1999" "Haas" "HA-5C" "Good" "Yes" "1999 Haas HA-5C " "T0130" "0" "Yes"
8154 "TABLES, NC and CNC" "2006" "Haas" "HRT-450" "Like New" "Yes" "17.7"" T-Slotted Table, 7.5"" Center Hole, 12"" 3-Jaw Chuck, Manual Tailstock, Brushless Style" "2006 Haas HRT-450 " "T0130" "-1" "Yes"
5081 "TABLES, NC and CNC" "2003" "Kitagawa" "TR-320" "Excellent" "Yes" "12.60"" Table, 3.93"" Through Hole, 11.1 RPM" "2003 Kitagawa TR-320 " "T0130" "-1" "Yes"
8592 "TABLES, NC and CNC" "MMK TecNara" "MD-300 R" "Excellent" "Yes" " MMK TecNara MD-300 R " "T0130" "0" "Yes"
7101 "TABLES, NC and CNC" "1968" "Ohio" "72""" "Very Good" "Yes" "Table Size (T-Slotted) - 72"", 360,000, Full Brake, Shot Pins at 90" "1968 Ohio 72"" " "T0130" "-1" "Yes"
7260 "TABLES, NC and CNC" "2000" "Producto" "Mark IV Series II 4812" "Excellent" "Yes" "2000 Producto Mark IV Series II 4812 " "T0130" "0" "Yes"
5344 "TABLES, NC and CNC" "1998" "Yuasa" "TPDX-400" "Very Good" "Yes" "15"", 360,000 Rotary" "1998 Yuasa TPDX-400 " "T0130" "-1" "Yes"
8165 "TABLES, ROTARY" "Bullard" "48"" x 48""" "Good" "Yes" " Bullard 48"" x 48"" " "T0140" "0" "Yes"
8074 "TABLES, ROTARY" "Giddings and Lewis" "48"" x 48"" Rotary Table" "Good" "Yes" " Giddings and Lewis 48"" x 48"" Rotary Table " "T0140" "0" "Yes"
8075 "TABLES, ROTARY" "Giddings and Lewis" "60"" x 60"" Rotary Table" "Good" "Yes" " Giddings and Lewis 60"" x 60"" Rotary Table " "T0140" "0" "Yes"
7596 "TABLES, ROTARY" "Giddings and Lewis" "48""" "Good" "Yes" " Giddings and Lewis 48"" " "T0140" "0" "Yes"
7608 "TABLES, ROTARY" "Giddings and Lewis" "48"" x 48"" Air Lift" "Good" "No" " Giddings and Lewis 48"" x 48"" Air Lift " "T0140" "0" "No"
8146 "TABLES, ROTARY" "Knight" "48"" x 48""" "Good" "Yes" " Knight 48"" x 48"" " "T0140" "0" "Yes"
7594 "TABLES, ROTARY" "Lucas" "48"" x 48""" "Good" " Lucas 48"" x 48"" " "T0140" "0" "Yes"
7601 "TABLES, ROTARY" "Lucas" "48""" "Good" "Yes" " Lucas 48"" " "T0140" "0" "Yes"
7598 "TABLES, ROTARY" "Lucas" "50"" x 60"" Air Lift" "No" " Lucas 50"" x 60"" Air Lift " "T0140" "0" "No"
7597 "TABLES, ROTARY" "Lucas" "48"" x 60"" Air Lift" "Good" "Yes" " Lucas 48"" x 60"" Air Lift " "T0140" "0" "No"
8328 "TESTERS, ROUNDNESS" "2002" "Precitech Precision" "FMS 8150" "Very Good" "Yes" "2002 Precitech Precision FMS 8150 " "T2300" "-1" "Yes"
6695 "TOOL PRESETTING MACHINES" "1985" "Parlec Zoller" "TMS-H400" "Good" "Yes" "1985 Parlec Zoller TMS-H400 " "T3870" "0" "Yes"
7464 "TOOL PRESETTING MACHINES" "2002" "Zoller" "Genius 3" "Very Good" "Yes" "Measuring Range Longitudinal 13.78"", Measuring Diameter 7.87"", X-Axis Travel 5.90"", Y-Axis Travel 15.748"", Z-Axis Travel 3.94"", PC Computer, Saturn 3 Software With Back-Up Disks" "2002 Zoller Genius 3 " "T3870" "-1" "Yes"
6696 "TOOL PRESETTING MACHINES" "Zoller" "V420" "Good" "Yes" " Zoller V420 " "T3870" "0" "Yes"
7105 "VIBRATORS (Incl. Vibratory Finishers)" "1977" "Sweco" "FC-70" "Good" "Yes" "Bowl Capacity - 70 Cubic Feet, Barrel Diameter - 92"", 20 HP, Internal Separation / Automatic Unloading, Polyurethane Lined Bowl, Additional 10"" Collar Added to the Top" "1977 Sweco FC-70 " "V2753" "-1" "Yes"
8196 "VIBRATORY FEEDERS" "Matrix" "Bowl Feeder" "Excellent" "Yes" " Matrix Bowl Feeder " "V3004" "-1" "Yes"
8176 "WATER JET CUTTING, CNC" "2006" "Calypso" "Hammerhead" "Mark 11D" "Very Good" "Yes" "2006 Calypso Hammerhead Mark 11D" "W0760" "0" "Yes"
8229 "WATER JET CUTTING, CNC" "2007" "Flow International" "Pro-1313" "Excelent" "Yes" "2007 Flow International Pro-1313 " "W0760" "0" "Yes"
8038 "WATER JET CUTTING, CNC" "1999" "Flow International" "A-Series" "Flow Master" "Good" "Yes" "1999 Flow International A-Series Flow Master" "W0760" "-1" "Yes"
8177 "WATER JET CUTTING, CNC" "2003" "Jet Edge" "AMC 3030" "Very Good" "Yes" "2003 Jet Edge AMC 3030 " "W0760" "0" "Yes"
8516 "WATER JET CUTTING, CNC" "2002" "Omax" "55100" "Very Good" "Yes" "2002 Omax 55100 " "W0760" "0" "Yes"
8294 "WELDING POSITIONERS" "2007" " --Select Mfg Here--" "10,000 Lbs" "Very Good" "Yes" "2007 --Select Mfg Here-- 10,000 Lbs " "W3752" "0" "Yes"
8332 "WELDING POSITIONERS" "2001" "Aronson" "HD-60" "Very Good" "Yes" "2001 Aronson HD-60 " "W3752" "0" "Yes"
8394 "WELDING POSITIONERS" "Cullen Friestedt" "14,000 Lbs" "Good" "Yes" " Cullen Friestedt 14,000 Lbs " "W3752" "-1" "Yes"
8306 "WELDING POSITIONERS" "Cullen Friestedt" "6,000 Lbs" "Fair" "Yes" " Cullen Friestedt 6,000 Lbs " "W3752" "0" "Yes"
8313 "WELDING POSITIONERS" "SVF" "72""" "Fair" "Yes" " SVF 72"" " "W3752" "0" "Yes"
8393 "WELDING POSITIONERS" "Worthington" "160P" "Good" "Yes" " Worthington 160P " "W3752" "0" "Yes"
7832 "WHEEL DRESSING MACHINES" "2004" "3M" "E228VH" "Like New" "Yes" "Diamond / CBN Wheel Diameter - 0.0625"" - 12"" x 1.5"", Wheel Pack Sizes Length Up to 8"", Diamond / CBN Wheel Travels X-9"", Y-9"", 1,800 RPM, Max. Truing Wheel Size .75"" x 8"", Dressing Arm 3,600 RPM, Dressing Arm Radial Rotation210, Truing Wheel Travel 1.75"" x 4"", Vision System Magnification 10X to 50X variable, Grinds Flats, Angles, Forms and Wheel Packs From CAD Files, High-Resolution 19"" Monitor With GenCAD v3.0 Interface for DWG & DXF Files., Pentium PC With Windows Operating System, Air Actuated Turret-lo" "2004 3M E228VH " "W4165" "-1" "Yes"
8421 "WIRE MACHINERY, FORMING" "U.S. Tool Company" "#33 Multi-Slide" "Very Good" "Yes" "Maximum Stock Width 2 1/2"", Maximum Stock Thickness 3/32"", Maximum Feed Length 12 1/2"", 40 - 160 SPM, 5 HP, Twelve (12) Channel Touch Screen Control, Vari Drive (like new), Air Clutch and Brake, Two (2) Press Heads, One (1) Double Length Bolster, One (1) Box of Accessories, Rack & Pinion Stripper Head, Front Cut Off Unit, Vacuum System for Slugs, Positive Check Feed, Stock Mister" " U.S. Tool Company #33 Multi-Slide " "W5903" "-1" "Yes"